journal article·2011-11

Enhancing the durability of polymer solar cells using gold nano-dots

Bobak Gholamkhass, Steven Holdcroft

Publisher page

Abstract

Abstract The durability of organic photovoltaic devices is improved by (a) replacing thermally labile poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) with gold nano-dots and (b) stabilizing the morphology of photoactive layers through thermally induced reaction. Gold nano-dots (Au-ND) (3–6 nm in diameter and 0.8 nm in height) were thermally deposited on ITO substrates prior to depositing a hole transporting layer (40 nm) of an azide-functionalized poly(3-hexylthiophene), P1 , which was insolubilized by heating to 150 °C. A blend of P1 and [6,6]-phenyl C 61 -butyric acid methyl ester (PCBM) was deposited and heated to 150 °C prior to the deposition of a Ca/Al cathode. The reaction of P1 with PCBM stabilized the bulk heterojunction film as evidenced by the suppression of crystallization of PCBM. Replacement of PEDOT:PSS with Au-ND, in combination with morphological stabilization, greatly improves the durability of PV devices under accelerated lifetime testing at 150 °C. Power conversion efficiencies (PCE) for the P1 :PCBM devices stabilized at 1.25% after 28 h of accelerated testing at 150 °C, whereas conventional P3HT:PCBM devices on PEDOT/ITO dropped to 0.58% after only 7 h of accelerated testing. Prospects for similarly enhancing the durability of highly efficient PV devices are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. H. Hoppe, N.S. Sariciftci, Polymer solar cells, in: Photoresponsive Polymers II, Springer-Verlag, Berlin, 2008, pp. 1–86.10.1007/12_2007_121 ↗
2. Self-assembled aggregates of rod-coil block copolymers and their solubilization and encapsulation of fullerenes10.1126/science.279.5358.1903 ↗
3. High-performance polymer semiconducting heterostructure devices by nitrene-mediated photocrosslinking of alkyl side chains10.1038/nmat2594 ↗
4. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
5. Efficient solar cells from layered nanostructures of donor and acceptor conjugated polymers10.1021/cm0497069 ↗
6. Performance enhancement of poly(3-hexylthiophene): methanofullerene bulk-heterojunction solar cells
7. For the bright future—bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
8. Toward high-performance polymer solar cells: the importance of morphology control10.1021/ma0618732 ↗
9. Efficiency limiting morphological factors of MDMO-PPV:PCBM plastic solar cells10.1016/j.tsf.2005.12.071 ↗
10. A setup for studying stability and degradation of polymer solar cells10.1016/j.solmat.2008.02.008 ↗
11. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
12. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
13. Flexible, conjugated polymer-fullerene-based bulk-heterojunction solar cells: basics, encapsulation, and integration10.1557/jmr.2005.0399 ↗
14. Pathways for the degradation of organic photovoltaic P3HT:PCBM based devices10.1016/j.solmat.2008.01.020 ↗
15. Reliability and degradation of organic light-emitting devices10.1063/1.112532 ↗
16. Enhancing the thermal stability of polythiophene: fullerene solar cells by decreasing effective polymer regioregularity10.1021/ja064434r ↗
17. Morphological stabilization of polymer photovoltaic cells by using cross-linkable poly(3-(5-hexenyl)thiophene)10.1021/ma802839a ↗
18. Photocrosslinkable polythiophenes for efficient, thermally stable, organic photovoltaics10.1002/adfm.200900043 ↗
19. Bulk heterojunctions based on native polythiophene10.1021/cm800431s ↗
20. Polythiophene-graft-styrene and polythiophene-graft-(styrene-graft-C-60) copolymers10.1002/marc.200700292 ↗
21. Poly(3-hexylthiophene) bearing pendant fullerenes: aggregation vs. self-organization10.1039/b9py00384c ↗
22. Toward stabilization of domains in polymer bulk heterojunction films10.1021/cm1018184 ↗
23. Optimization of organic semiconductor devices by anode modification
24. Modification of indium–tin oxide electrodes with thiophene copolymer thin films: optimizing electron transfer to solution probe molecules10.1021/la061840f ↗
25. Light induced damage in poly(3,4-ethylenedioxythiophene) and its derivatives studied by photoelectron spectroscopy10.1016/j.synthmet.2003.08.017 ↗
26. Photochemistry of electronically conducting poly(3-alkylthiophenes) containing FeCl4-counterions10.1021/cm00043a017 ↗
27. Effect of buffer layers on stability of polymer-based organic solar cells10.1143/JJAP.49.01AC02 ↗
28. Lifetime of organic light emitting diodes on polymer anodes10.1063/1.2975369 ↗
29. Lifetimes of organic photovoltaics: combining chemical and physical characterisation techniques to study degradation mechanisms10.1016/j.solmat.2006.04.009 ↗
30. Transparent anodes for polymer photovoltaics: oxygen permeability of PEDOT10.1016/j.solmat.2006.11.006 ↗
31. Impact of contact evolution on the shelf life of organic solar cells10.1039/b910213b ↗
32. On the improvement of the anode/organic material interface in organic solar cells by the presence of an ultra-thin gold layer10.1002/pssa.200824343 ↗
33. Ultra-thin metal layer passivation of the transparent conductive anode in organic solar cells10.1016/j.solmat.2008.06.016 ↗
34. On the improvement of the efficiency of organic photovoltaic cells by the presence of an ultra-thin metal layer at the interface organic/ITO10.1051/epjap:2008166 ↗
35. High efficiency polymer solar cells with wet deposited plasmonic gold nanodots10.1016/j.orgel.2009.01.004 ↗
36. Polymer memory device based on conjugated polymer and gold nanoparticles10.1063/1.2337252 ↗
37. Ultrathin transparent Au electrodes for organic photovoltaics fabricated using a mixed mono-molecular nucleation layer10.1002/adfm.201002021 ↗
38. Chemical adsorption of poly(3-alkylthiophene) on an using self-assembling technique10.1143/JJAP.46.L1126 ↗
39. Gold nanoparticle linking to polypyrrole and polythiophene: monolayers and multilayers10.1021/cm801836j ↗
40. Work function control of hole-selective polymer/ITO anode contacts: an electrochemical doping study10.1039/b923201j ↗
41. Dip-coating of TiO2 films using a sol derived from Ti(O–I–Pr)4-diethanolamine–H2O–I–Proh system10.1007/BF01115798 ↗
42. Determination of size and concentration of gold nanoparticles from UV–vis spectra10.1021/ac0702084 ↗
43. Gold and alloy nanoparticles in solution and thin film assembly: spectrophotometric determination of molar absorptivity10.1016/S0003-2670(03)00986-3 ↗
44. General photo-patterning of polyelectrolyte thin films via efficient ionic bis(fluorinated phenyl azide) photo-crosslinkers and their post-deposition modification10.1002/adfm.200600506 ↗
45. Remarkable catalysis of intersystem crossing of singlet (pentafluorophenyl)nitrene10.1021/ja00008a080 ↗
46. Unusually long lifetimes of the singlet nitrenes derived from 4-azido-2,3,5,6-tetrafluorobenzamides10.1021/j100053a012 ↗
47. Low bandgap polymers for photon harvesting in bulk heterojunction solar cells10.1039/b306630d ↗
48. The influence of poly(3-hexylthiophene) regioregularity on fullerene-composite solar cell performance10.1021/ja806493n ↗
49. The 50:50wt% P1:PCBM devices exhibited an initial PCE of 0.6% that increased to 1.15% after 1h and remained stable at 0.9% after 28h.