journal article·2016-12

Effect of ultrasonically generated water vapor treatment on the Cu2ZnSnS4/CdS heterojunction-based photovoltaic cells

Myo Than Htay, Ryosuke Fujimura, Remi Hasuike, Kazushi Takei, Noritaka Momose, Yoshio Hashimoto, Kentaro Ito

Publisher page

Abstract

Abstract The surface treatment of Cu2ZnSnS4 thin films was carried out by utilizing ultrasonically generated water vapor. Suppression of the unintentional fluctuation of chemical composition near the heterointerface and enhancement in the homogeneity of CdS deposition on the Cu2ZnSnS4 thin films were observed in the samples with water vapor treatment at the temperatures between 250 ° C and 350 ° C . The effect on the variation of conduction band and valence band offsets at the Cu2ZnSnS4/CdS heterojunction, which was observed to be in a staggered alignment, was less than ±50 meV due to the treatment. Reproducibility of the cell characteristics was improved by the H2O spray treatment of the Cu2ZnSnS4 absorbers before the deposition of CdS buffer layers. At treatment temperature of 300 ° C , the improvement of efficiency by about 25% compared to that of the untreated samples was achieved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. B.M. Kayes, H. Nie, R. Twist, S.G. Spruytte, F. Reinhardt, I.C. Kizilyalli, G.S. Higashi, 27.6% Conversion efficiency, a new record for single-junction solar cells under 1 sun illumination, in: Proceedings of the 37th IEEE Photovoltaics Specialist Conference, 2011, p. 4, 〈http://dx.doi.org/10.1109/PVSC.2011.6185831〉.10.1109/PVSC.2011.6185831 ↗
2. New world record efficiency for Cu(In,Ga)Se2 thin-film solar cells beyond 20%10.1002/pip.1078 ↗
3. Solar cell efficiency tables (version 45)10.1002/pip.2573 ↗
4. Influence of Ge composition in the Cu2Sn1−xGexS3 thin-film photovoltaic absorber prepared by sulfurization of laminated metallic precursor10.1016/j.solmat.2015.04.030 ↗
5. Energy level diagram around Ge-rich grain boundaries in Cu2Sn1−xGexS3 (CTGS) thin-film solar cells10.1016/j.solmat.2014.11.024 ↗
6. Cu2Sn1−xGexS3(x=0.17) thin-film solar cells with high conversion efficiency of 6.0%10.7567/APEX.6.045501 ↗
7. T. Mandokoro, M.T. Htay, N. Momose, T. Taishi, Y. Hashimoto, K. Ito, Preparation of Cu2Sn1−xGexS3 thin-film alloys by sulfurization and their photovoltaic properties, in: Proceedings of the 4th International Symposium on Organic and Inorganic Electronic Materials and Related Nanotechnologies, P3–57, 2013.
8. Microstructural analysis of 9.7% efficient Cu2ZnSnSe4 thin film solar cells10.1063/1.4901401 ↗
9. Characterization of defects in 9.7% efficient Cu2ZnSnSe4–CdS–ZnO solar cells10.1063/1.4826448 ↗
10. Co-evaporated Cu2ZnSnSe4 films and devices10.1016/j.solmat.2012.01.008 ↗
11. 9.0% efficient Cu2ZnSn(S,Se)4 solar cells from selenized nanoparticle inks10.1002/pip.2472 ↗
12. Ito · 2015
13. Physical and electrical characterization of high-performance Cu2ZnSnSe4 based thin film solar cells10.1016/j.tsf.2014.10.052 ↗
14. Improvement of Cu2ZnSn(S,Se)4 solar cell efficiency by surface treatment10.1002/pssc.201400309 ↗
15. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
16. Thin film solar cell with 8.4% power conversion efficiency using an earth-abundant Cu2ZnSnS4 absorber10.1002/pip.1174 ↗
17. T. Eguchi, T. Maki, S. Tajima, T. Ito, T. Fukano, Cu2ZnSnS4 solar cells with 7.6% efficiency, Technical Digest, in: Proceedings of the 21st International Photovoltaic Science and Engineering Conference, 4D-3P-24, 2011.
18. Cu2ZnSnS4 thin film solar cells utilizing sulfurization of metallic precursor prepared by simultaneous sputtering of metal targets10.7567/JJAP.50.01BG09 ↗
19. Cu2ZnSnS4 thin film solar cells from electroplated precursors Novel low-cost perspective10.1016/j.tsf.2008.11.061 ↗
20. Towards a CdS/Cu2ZnSnS4 solar cell efficiency improvement: a theoretical approach10.1063/1.4903826 ↗
21. Detailed balance limit of efficiency of p–n junction solar cells10.1063/1.1736034 ↗
22. An experimental and first-principles study on band alignments at interfaces of Cu2ZnSnS4/CdS/ZnO heterojunctions10.1088/0022-3727/47/7/075304 ↗
23. Valence band offset at the CdS/Cu2ZnSnS4 interface probed by x-ray photoelectron spectroscopy10.1088/0022-3727/46/17/175101 ↗
24. The band offset at CdS/Cu2ZnSnS4 heterojunction interface10.1007/s13391-012-2023-0 ↗
25. First-principles study on influences of crystal structure and orientation on band offsets at the CdS/Cu2ZnSnS4 interface10.1155/2012/619812 ↗
26. Direct measurement of band offset at the interface between CdS and Cu2ZnSnS4 using hard X-ray photoelectron spectroscopy10.1063/1.4850235 ↗
27. Cliff-like conduction band offset and KCN-induced recombination barrier enhancement at the CdS/Cu2ZnSnS4 thin-film solar cell heterojunction10.1063/1.3663327 ↗
28. Band alignments of different buffer layers (CdS, Zn(O,S), and In2S3) on Cu2ZnSnS410.1063/1.4873715 ↗
29. Band alignment at the Cu2ZnSn(SxSe1−x)4/CdS interface10.1063/1.3600776 ↗
30. Cu2ZnSn(SxSe1−x)4 thin-film solar cells utilizing simultaneous reaction of a metallic precursor with elemental sulfur and selenium vapor sources10.1143/APEX.5.081201 ↗
31. Cd-free buffer layer materials on Cu2ZnSn(SxSe1−x)4: band alignments with ZnO, ZnS and In2S310.1063/1.4714737 ↗
32. Enhanced conversion efficiencies of Cu2ZnSnS4-based thin film solar cells by using preferential etching technique10.1143/APEX.1.041201 ↗
33. Effect of surface treatment of CZTS absorber layer by ammonia solution10.1002/pssc.201400275 ↗
34. Effects of preferential etching treatment of CZTS absorber layer by deionized water10.1002/pssc.201400276 ↗
35. Surface etching of CZTS absorber layer by Br-related solution10.1002/pssc.201400274 ↗
36. Development of a selective chemical etch to improve the conversion efficiency of Zn-rich Cu2ZnSnS4 solar cells10.1021/ja301373e ↗
37. A cadmium-free Cu2ZnSnS4/ZnO heterojunction solar cell prepared by practicable processes10.7567/JJAP.50.032301 ↗
38. Synthesis of a cuprite thin film by oxidation of a Cu metal precursor utilizing ultrasonically generated water vapor10.1016/j.tsf.2014.01.077 ↗
39. Field emission property of ZnO nanowires prepared by ultrasonic spray pyrolysis10.1016/j.spmi.2015.05.003 ↗
40. Growth of ZnO submicron single-crystalline platelets, wires, and rods by ultrasonic spray pyrolysis10.1143/JJAP.46.440 ↗
41. Band alignment at CdS/CuInS2 heterojunction10.1063/1.114965 ↗
42. Discrimination and detection limits of secondary phases in Cu2ZnSnS4 using X-ray diffraction and Raman spectroscopy10.1016/j.tsf.2014.08.028 ↗