Influence of functionalized fullerene structure on polymer photovoltaic degradation
Source abstract
Abstract
The time dependence of device performance has been measured for photocells using blends containing the conjugated polymer, poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) with two different functionalized C60 electron acceptor molecules: commercially available [6,6]-phenyl C61 butyric acid methyl ester (PCBM) or [6,6]-phenyl C61 butyric acid octadecyl ester (PCBOD) produced in this laboratory. Performance was characterized by the short-circuit current output of the devices, with the time dependence of PCBM samples typically degrading exponentially. Variations in the characteristic lifetime of the devices were observed to depend on the molar fraction of the electron acceptor molecules (calculated with respect to the MEH-PPV monomer fraction). In comparison to the PCBM samples, the stability of the PCBOD blends was significantly enhanced, with a one or two order of magnitude improvement. Corresponding spectroscopic data with similar time evolution as the transport measurements suggests an independent means for determining and understanding degradation mechanisms.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Molecular Junctions and Nanostructures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. 2003
2. Organic photovoltaics10.1039/b812502n ↗
3. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
4. A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules10.1016/j.solmat.2009.07.015 ↗
5. Lifetimes of organic photovoltaics: photochemistry, atmosphere effects and barrier layers in ITO-MEHPPV:PCBM-aluminium devices10.1016/j.solmat.2004.09.002 ↗
6. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
7. Significant improvement of polymer solar cell stability10.1021/cm051320q ↗
8. Thickness dependence, in situ measurements, and morphology of thermally controlled interdiffusion in polymer-C60 photovoltaic devices10.1103/PhysRevB.69.165320 ↗
9. Effect of temperature on the morphological and photovoltaic stability of bulk heterojunction polymer: fullerene solar cells10.1016/j.solmat.2008.01.006 ↗
10. Morphology and thermal stability of the active layer in poly(p-phenylenevinylene)/methanofullerene plastic photovoltaic devices10.1021/ma035620+ ↗
11. Determination of the degradation constant of bulk heterojunction solar cells by accelerated lifetime measurements10.1007/s00339-003-2499-4 ↗
12. Enhanced photo oxidative stability of conjugated polymers via C60 doping10.1021/jp960322i ↗
13. Stability and photodegradation mechanisms of conjugated polymer/fullerene plastic solar cells10.1016/S0927-0248(99)00094-X ↗
14. Photovoltaic devices with methanofullerenes as electron acceptors10.1021/jp025973v ↗
15. Synthesis of C60 derivatives for polymer photovoltaic cell10.1016/S0379-6779(02)00916-5 ↗
16. Organic photovoltaic devices based on a block copolymer/fullerene blend10.1016/j.orgel.2006.07.004 ↗
17. Preparation and characterization of fulleroid and methanofullerene derivatives10.1021/jo00108a012 ↗
18. Synthesis of 1,1′-binaphthyl-based enantiopure C60 dimers10.1021/jo020088u ↗
19. Planar-diffused photovoltaic device based on the MEH-PPV/PCBM system prepared by solution process10.1016/j.solmat.2008.10.028 ↗
20. Toward high-performance polymer solar cells: the importance of morphology control10.1021/ma0618732 ↗
21. Poly(3-hexylthiophene)/C60 heterojunction solar cells: implication of morphology on performance and ambipolar charge collection10.1016/j.solmat.2007.11.001 ↗
22. Correlation between structural and optical properties of composite polymer/fullerene films for organic solar cells10.1002/adfm.200400521 ↗
23. Flux creep in type-II superconductors10.1103/PhysRev.181.682 ↗
24. Aggregation and gelation effects on the performance of poly(3-hexylthiophene)/fullerene solar cells10.1021/ma801368z ↗