Mechanically driven hybrid recycling of polyolefin elastomer glass–glass photovoltaic module for targeted material recovery
Source abstract
Abstract
The increasing deployment of glass-glass photovoltaic (PV) modules with polyolefin elastomer (POE) encapsulation creates a need for recycling approaches tailored to these modules. The study aims to develop and evaluate a hybrid recycling process combining mechanical, thermal, and chemical treatments that provides separation and recovery of valuable materials from end-of-life PV modules, supporting more sustainable waste management. High-intensity impact milling fragmented the module into particles, with the coarse fraction (>2.8 mm) retaining 22% of the total mass mainly as bonded multi-layered pieces. Thermal delamination at 500 degrees C decomposed POE and detached glass, solar cells, and metal ribbons, with mass loss analysis confirming that this single fraction contained over 94% of POE. Subsequent hydrometallurgical acid leaching enabled extraction of metals. Its analysis showed that 94% of aluminium and 93% of silver - originating from solar cell metallization - were observed in the coarse fraction. These results proved that strong POE elasticity preserved large, bonded components after mechanical treatment, concentrating most encapsulant and solar cells in the coarse fraction. Additional sieving of the delaminated >2.8 mm material demonstrated that fine sub-fractions (<1 mm), although representing only one-third of the mass, contained more than 98% of the metals within the fraction. The results demonstrated, for the first time, how the mechanical treatment of POE encapsulated glass-glass PV module leads the material separation and distribution. The developed approach enables targeted processing of selected fractions - reducing energy demand and chemical use - and therefore offering an environmentally beneficial and more cost-efficient recycling pathway.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photovoltaic Systems and Sustainability · Photovoltaic System Optimization Techniques · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Masson · 2025
2. Technological learning for resource efficient terawatt scale photovoltaics10.1039/D1EE02497C ↗
3. Major challenges and opportunities in silicon solar module recycling10.1002/pip.3316 ↗
4. Unfounded concerns about photovoltaic module toxicity and waste are slowing decarbonization10.1038/s41567-023-02230-0 ↗
5. Weckend · 2016
6. Raw material needs for the large-scale deployment of photovoltaics – effects of innovation-driven roadmaps on material constraints until 205010.1016/j.rser.2020.110589 ↗
7. Technical challenges and opportunities in realising a circular economy for waste photovoltaic modules10.1016/j.rser.2020.109911 ↗
8. Environmental impacts of recycling crystalline silicon (c-SI) and cadmium telluride (CDTE) solar panels10.1016/j.scitotenv.2020.138827 ↗
9. An overview of solar photovoltaic panels' end-of-life material recycling10.1016/j.esr.2019.100431 ↗
10. Recent progress in silicon photovoltaic module recycling processes10.1016/j.resconrec.2022.106612 ↗
11. A comprehensive hydrometallurgical recycling approach for the environmental impact mitigation of EoL solar cells10.1016/j.jece.2021.106830 ↗
12. A comprehensive review on the recycling technology of silicon based photovoltaic solar panels: challenges and future outlook10.1016/j.jclepro.2024.141661 ↗
13. Recycling of discarded photovoltaic modules using mechanical and thermal methods10.29227/IM-2022-01-13 ↗
14. Recycling of photovoltaic panels by physical operations10.1016/j.solmat.2014.01.012 ↗
15. Photovoltaic module recycling, a physical and a chemical recovery process10.1016/j.solmat.2019.01.035 ↗
16. A techno-economic review of silicon photovoltaic module recycling10.1016/j.rser.2019.04.020 ↗
17. Thermal delamination of end-of-life crystalline silicon photovoltaic modules10.1177/0734242X211038184 ↗
18. Recycling WEEE: polymer characterization and pyrolysis study for waste of crystalline silicon photovoltaic modules10.1016/j.wasman.2016.08.036 ↗
19. The application of organic solvents and thermal process for eliminating EVA resin layer from waste photovoltaic modules
20. Recovery and analysis of polymeric layers from waste solar modules by chemical route10.1016/j.solener.2022.08.033 ↗
21. An investigation of the recovery of silicon photovoltaic cells by application of an organic solvent method10.1149/2162-8777/abe093 ↗
22. Chemical delamination applicable to a low-energy recycling process of photovoltaic modules10.3390/pr11113078 ↗
23. Recovery of pure silicon and other materials from disposed solar cells10.1155/2021/5530213 ↗
24. NOx-Free leaching methods for efficient silver and aluminium recovery from crystalline silicon solar cells10.3390/ma18112668 ↗
25. Silicon photovoltaic modules at End-of-Life: removal of polymeric layers and separation of materials10.1016/j.wasman.2019.02.004 ↗
26. Thermal–mechanical delamination for recovery of tempered glass from photovoltaic panels10.3390/en17174444 ↗
27. Practical 2-Step milling process for sustainable lithium-ion battery anodes from photovoltaic module recycling10.1016/j.solener.2024.112515 ↗
28. Photovoltaic solar panels of crystalline silicon: characterization and separation10.1177/0734242X15622812 ↗
29. Physical and chemical treatment of end of life panels: an integrated automatic approach viable for different photovoltaic technologies10.1016/j.wasman.2016.11.011 ↗
30. International Technology Roadmap for Photovoltaic (ITRPV) 2024 Results
31. Durability and performance of encapsulant films for bifacial heterojunction photovoltaic modules10.3390/polym14051052 ↗
32. Versatility assessment of supercritical CO2 delamination for photovoltaic modules with ethylene-vinyl acetate, polyolefin or ethylene methacrylic acid ionomer as encapsulating polymer10.1016/j.jclepro.2023.137292 ↗
33. An application of solvent and thermal treatment to recover materials from photovoltaic module encapsulated with polyolefin elastomer10.1177/0734242X241305092 ↗
34. Circular Olefin Copolymers Made de Novo from Ethylene and α-Olefins10.1038/s41467-024-45219-w ↗
35. Thermal decomposition of polyolefins under different oxygen content. Kinetic parameters evaluation10.1016/j.energy.2024.130565 ↗
36. A brief review of passivation materials and process for high efficiency PERC solar cell10.1007/s42341-021-00366-5 ↗