journal article·2026-05Open access

Surface erosion damage in mounting structures of large-scale photovoltaic systems

J. de Damborenea, A. Conde, P. Bernal, F. Ortuño, C. Pinto da Silva, M.A. Arenas

Abstract

A large-scale photovoltaic (PV) plant is a complex infrastructure composed of PV modules supported by metallic mounting structures, which may include motors for module tracking, inverters, cabling, and control systems. While the degradation of PV panels and the corrosion of structural elements are well-studied, limited research has addressed the specific impact of sand erosion on metallic structures in desert and semi-desert environments. This study investigates the erosion resistance of three commonly used galvanized coatings in PV mounting systems: continuous galvanized steel (Z275), Zn-Mg-Al alloy (ZM310), and hot-dip galvanized steel (HDG). Additionally, a representative sample of the aluminum-based motion components, protected by an organic coating, was included. The organic coating was evaluated using ASTM D968-22 and met the AAMA 2604-05 abrasion resistance requirements. Metallic coatings were tested following both ASTM D968-22 and a modified ASTM G76-18 standard adapted to simulate desert conditions. Among the materials tested, the Z275 coating exhibited the lowest erosion rate, outperforming both HDG and ZM310. The findings highlight the importance of considering ductility and mechanical toughness -beyond hardness-when assessing erosion resistance for solar plant structures.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Erosion and Abrasive Machining · Photovoltaic System Optimization Techniques · Photovoltaic Systems and Sustainability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Overview and perspective of integrated photovoltaics with a focus on the European Union10.3390/app142210628 ↗
2. Land requirements for utility-scale PV: an empirical update on power and energy density10.1109/JPHOTOV.2021.3136805 ↗
3. Experimental analysis of dust composition impact on photovoltaic panel performance: a case study10.1016/j.solener.2023.112206 ↗
4. Experimental studies of dust accumulation and its effects on the performance of solar PV systems in Mediterranean climate10.1016/j.egyr.2024.01.078 ↗
5. Investigation on particle deposition criterion and dust accumulation impact on solar PV module performance10.1016/j.energy.2021.121240 ↗
6. Degradation of photovoltaic module backsheet materials in desert climate10.1016/j.solmat.2024.113118 ↗
7. Miller · 2016 · 1
8. Mechanisms of the erosion of metals by solid particles
9. Particle erosion of ductile metals: a mechanism of material removal10.1016/0043-1648(74)90091-X ↗
10. Failure analysis of a gas pipeline10.1016/j.engfailanal.2003.06.004 ↗
11. Climate change and potential demise of the Indian deserts10.1029/2022EF003459 ↗
12. Analysis of solar panel support structures
13. A methodology for an optimal design of ground-mounted photovoltaic power plants10.1016/j.apenergy.2022.118881 ↗
14. Electrochemical and dry sand impact erosion studies on carbon steel10.1038/srep16583 ↗
15. Sand erosion of metals and plastics: a brief review10.1016/0043-1648(69)90048-9 ↗
16. Erosion of sand screens by solid particles: a review of experimental investigations10.1007/s13202-022-01467-4 ↗
17. A review of erosion-corrosion models for the oil and gas industry applications
18. Slurry erosion of steel – review of tests, mechanisms and materials
19. Enhancing wind erosion assessment of metal structures on dry and degraded lands through machine learning10.3390/land12081503 ↗
20. Numerical simulation study on the erosion and wear of galvanized coatings on steel structures under the action of wind and sand
21. Gee
22. Abrasive wear behavior of batch hot-dip galvanized coatings10.3390/ma17071547 ↗
23. Hybrid system model for wind abrasion segmentation using semi-automatic classification of remote sensing multispectral areas10.1016/j.heliyon.2023.e19655 ↗
24. Development of a test method for the investigation of the abrasive effect of sand particles on components of solar energy systems
25. The development of sand erosion induced by shield-tunnel joint leakage10.1016/j.engfailanal.2023.107068 ↗
26. Grain size analysis and maximum and minimum dry density testing of Ottawa F-65 sand for LEAP-UCD-2017
27. Porter · 1991
28. Marder · 2023
29. Study on the microstructure and corrosion resistance of Zn-3Al-xMg alloy10.1016/j.surfcoat.2023.130011 ↗
30. Correlative characterization of zn-al-mg coatings by electron microscopy and FIB tomography10.1016/j.matchar.2020.110407 ↗
31. Dust over Saudi Arabia from multisource data: case studies in winter and spring
32. Spatial and temporal variation of the near-surface wind environment in the Sahara desert, North Africa10.3389/feart.2021.789800 ↗
33. Study on the influence of surface roughness on the erosion characteristics of compressor blades10.1016/j.powtec.2023.119037 ↗
34. The effect of surface roughness on the erosion of mild steel
35. Mechanical properties of hard metals and their erosive wear resistance10.1016/0043-1648(94)90244-5 ↗
36. Erosion of AISI 4140 steel10.1016/0043-1648(87)90243-2 ↗
37. Solid particle erosion on different metallic materials
38. Evaluating the effect of hardness on erosion characteristics of aluminum and steels10.1007/s11665-014-1004-x ↗
39. Erosion-behaviors of the steel structure coating eroded at low erosion-angle in sandstorm environment10.4028/www.scientific.net/AMR.383-390.3933 ↗
40. Cracking behavior and formability of zn-al-mg coatings: understanding the influence of steel substrates10.1016/j.matdes.2021.110215 ↗