Ultra-narrow strip-shaped silicon solar cells for semi-transparent PV modules: Interplay among cut edges, cell structure, strip dimensions, and partial edge passivation
Source abstract
Abstract
Ultra-narrow strip-shaped crystalline silicon (c-Si) solar cells are promising for translucent photovoltaic modules but suffer from significant efficiency losses due to edge recombination after cell separation. An additional edge passivation process can alleviate this loss, but it increases cost and process complexity. This study investigates alternative approaches to suppress edge recombination loss without dedicated passivation layers. Strip-shaped silicon heterojunction (SHJ) cells, 3–9 mm wide, were fabricated using laser scribing and mechanical cleaving (LSMC). Experimental results, supported by device simulations, reveal that front-junction configurations and thinner c-Si substrates effectively mitigate efficiency loss associated with cut edges. Two additional design strategies were evaluated. A transparent conductive oxide (TCO) margin approach, which removes the emitter near the edge, improved open-circuit voltage to 715 mV in 5-mm-wide cells, although efficiency was constrained by reduced short-circuit current density. In contrast, the Pre-Grooved LSMC (PG-LSMC) method, enabling in-situ partial edge passivation, suppressed edge recombination and enhanced efficiency, particularly in rear-junction-type cells. These results highlight that optimized device design, thickness reduction, emitter isolation, and in-situ partial passivation can compensate for the absence of dedicated edge passivation. The insights gained from these extreme geometries are broadly applicable to divided and shingled cells, where edge recombination remains a critical loss mechanism. • Front-junction design and thinner substrates reduce edge-related loss in ultra-narrow cells. • TCO margin approach mitigates V OC & FF losses in ultra-narrow cells. • Pre-grooved LSMC method enables in-situ partial edge passivation, enhancing cell efficiency. • The above-mentioned strategies compensate for the absence of dedicated edge passivation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Photovoltaic System Optimization Techniques · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Resistive power loss analysis of PV modules made from halved 15.6 × 15.6 Cm 2 silicon PERC solar cells with efficiencies up to 20.010.1109/JPHOTOV.2014.2367868 ↗
2. Analysis of different laser cutting conditions on electrical characteristics of half-cut HJT solar cells10.1007/s40042-023-00910-x ↗
3. Shingling technology for cell interconnection: technological aspects and process integration10.1016/j.egypro.2018.09.010 ↗
4. Achieving net zero energy greenhouses by integrating semitransparent organic solar cells10.1016/j.joule.2019.12.018 ↗
5. Recent advances in semi-transparent polymer and perovskite solar cells for power generating window applications10.1039/C8EE00154E ↗
6. Efficiency enhancement of ZnO/Cu2O solar cells with well oriented and micrometer grain sized Cu2O films10.1063/1.5017002 ↗
7. Building energy performance evaluation of building integrated photovoltaic (BIPV) window with semi-transparent solar cells10.1016/j.apenergy.2014.04.106 ↗
8. Method for manufacturing solar battery cell
9. Photovoltaic element and manufacturing method thereof
10. Crystalline silicon solar cell and method for manufacturing the same, method for manufacturing solar cell module, method for manufacturing concentrating solar cell module
11. Influence of laser cutting conditions on electrical characteristics of half-size bifacial silicon solar cells10.1016/j.mssp.2019.104747 ↗
12. Thermal laser separation of PERC and SHJ solar cells10.1109/JPHOTOV.2020.3041251 ↗
13. K. Nakano, K. Yoshikawa, K. Yamamoto, Solar cell, method of manufacturing the same, and solar cell module, JPWO2018055847A1, n.d.
14. Postmetallization “Passivated Edge Technology” for separated silicon solar cells10.1109/JPHOTOV.2019.2959946 ↗
15. TOPCon shingle solar cells: thermal laser separation and passivated edge technology10.1002/pip.3680 ↗
16. Compensating cutting losses by passivation solution for industry upgradation of TOPCon and SHJ solar cells10.1002/aesr.202200154 ↗
17. Stable passivation of cut edges in encapsulated n-type silicon solar cells using Nafion polymer10.1016/j.solmat.2023.112401 ↗
18. Sliver® solar cells: a new thin-crystalline silicon photovoltaic technology10.1016/j.solmat.2005.09.025 ↗
19. Thin single crystalline elongate silicon solar cells10.1016/j.egypro.2012.02.007 ↗
20. Potential of very thin and high-efficiency silicon heterojunction solar cells10.1002/pip.3181 ↗
21. Very thin (56 μm) silicon heterojunction solar cells with an efficiency of 23.3% and an open-circuit voltage of 754 mV10.1002/solr.202100634 ↗
22. Nanocrystalline-silicon hole contact layers enabling efficiency improvement of silicon heterojunction solar cells: impact of nanostructure evolution on solar cell performance10.1002/pip.3368 ↗
23. Modeling edge recombination in silicon solar cells10.1109/JPHOTOV.2017.2787020 ↗
24. A detailed full-cell model of a 2018 commercial PERC solar cell in Quokka310.1109/JPHOTOV.2018.2863548 ↗
25. Reassessment of the limiting efficiency for crystalline silicon solar cells10.1109/JPHOTOV.2013.2270351 ↗
26. The effect of sample edge recombination on the averaged injection-dependent carrier lifetime in silicon10.1063/1.3691230 ↗
27. Development of passivating edge shingle modules with right cut, new loss evaluation and liquid-based edge passivation strategy10.1016/j.solmat.2023.112513 ↗
28. Approaches to mitigate edge recombination effects in silicon lifetime samples with emitter10.1109/JPHOTOV.2025.3568471 ↗
29. Nature of doped a-Si:H/c-Si interface recombination10.1063/1.3129578 ↗
30. Impact of silicon wafer thickness on photovoltaic performance of crystalline silicon heterojunction solar cells10.7567/JJAP.57.08RB10 ↗