journal article·2026-01Open access

Enabling highly conductive charged oxide inversion layers through hot corona discharge

Jingyan Chen, Tarek O. Abdul Fattah, Anastasia Soeriyadi, Matthew Wright, Edris Khorani, Peter R. Wilshaw, John D. Murphy, Ruy S. Bonilla

Abstract

Silicon solar cell manufacturing is dominated by cell architectures that rely on a high-temperature energy-intensive diffusion process to introduce dopants. Such doped layers lead to substantial Auger recombination losses. Charged oxide inversion layer (COIL) solar cells eliminate the need for high-temperature diffusion and highly doped surface layers by incorporating charge in a surface dielectric to form an inversion layer emitter beneath the semiconductor-dielectric interface. The success of the COIL design hinges on achieving a sufficiently high dielectric charge to produce highly conductive inversion-layer emitters. In this work, we develop a new “hot-corona discharge” technique to facilitate the charge drive-in via a process integrating corona charging and thermal annealing into a single step. We show the process is effective in creating an n- type inversion layer on p -type silicon wafers, yielding increases in carrier lifetime and reductions in emitter sheet resistance. The temperature (330–430 ° C) and time (30–1020 s) dependence of this new hot-corona approach is studied, demonstrating careful control over charge density. By optimising the process against temperature and ion drive-in cycles, we achieve the highest positive charge concentration reported on a SiO 2 /Si interface of >4.0 × 10 13 q/cm 2 . With the ability to incorporate such high charge density, a low sheet resistance and highly conductive inversion layer can be formed. This represents a significant step forward in the attempt to replace the diffused emitter technology with a low-temperature alternative, enabling high-efficiency inversion-layer solar cells with reduced thermal budget and intrinsic losses. • A “hot-corona” method was developed to incorporate charge into SiO 2 layer to form an inversion layer. • The highest positive charge concentration at SiO 2 /Si interface of >4.0 × 10 13 q/cm 2 was reported. • The temperature and time dependence of the hot-corona approach was demonstrated. • A simulated solar cell efficiency exceeding 24 % was achieved based on COIL method.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Semiconductor materials and devices · Advancements in Semiconductor Devices and Circuit Design · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Industrial silicon solar cells applying the passivated emitter and rear cell (PERC) concept—A review10.1109/JPHOTOV.2016.2571627 ↗
2. The Passivated Emitter and Rear Cell (PERC): from conception to mass production10.1016/j.solmat.2015.06.055 ↗
3. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
4. Optimizing phosphorus diffusion for photovoltaic applications: peak doping, inactive phosphorus, gettering, and contact formation10.1063/1.4949326 ↗
5. Charge carrier lifetime degradation in Cz silicon through the formation of a boron-rich layer during BBr3 diffusion processes10.1088/0268-1242/25/5/055001 ↗
6. Assessment and parameterisation of Coulomb-enhanced auger recombination coefficients in lowly injected crystalline silicon10.1063/1.366360 ↗
7. Heavily doped Si:P emitters of crystalline Si solar cells: recombination due to phosphorus precipitation10.1002/pssr.201409138 ↗
8. Recombination activity of interstitial iron and other transition metal point defects in p- and n-type crystalline silicon10.1063/1.1812833 ↗
9. Impact of light‐induced recombination centres on the current–voltage characteristic of czochralski silicon solar cells10.1002/pip.373 ↗
10. Reassessment of the intrinsic bulk recombination in crystalline silicon10.1016/j.solmat.2021.111467 ↗
11. Efficient silicon solar cells with dopant-free asymmetric heterocontacts10.1038/nenergy.2015.31 ↗
12. Low cost - high efficiency MIS/inversion layer solar cells
13. Aluminum-oxide-based inversion layer solar cells on n-type crystalline silicon: fundamental properties and efficiency potential10.1063/1.4865962 ↗
14. New TiOx-MIS and SiO2-MIS silicon solar cells10.1109/T-ED.1978.19119 ↗
15. Silicon nitride for the improvement of silicon inversion layer solar cells10.1016/0038-1101(81)90103-9 ↗
16. Optical stability of silicon nitride MIS inversion layer solar cells10.1109/T-ED.1985.22204 ↗
17. Inversion layer solar cells on chemically vapor‐deposited polycrystalline silicon thin films10.1063/1.333159 ↗
18. 18.5% efficient first-generation MIS inversion-layer silicon solar cells
20. Metal-insulator-semiconductor silicon solar cells10.1016/0379-6787(83)90037-6 ↗
21. Simulation and optimization of metal-insulator-semiconductor inversion-layer silicon solar cells10.1109/16.877180 ↗
22. High-efficiency solar cells based on inversion layer emitters
23. Fischer · 2024
24. Assessing the potential of inversion layer solar cells based on highly charged dielectric nanolayers10.1002/pssr.202100129 ↗
25. Silicon surface passivation by Al2O3: recombination parameters and inversion layer solar cells10.1016/j.egypro.2012.07.070 ↗
26. Potassium ions in SiO2: electrets for silicon surface passivation10.1088/1361-6463/aa9b1b ↗
27. Ultrathin Al-doped SiOx passivating hole-selective contacts formed by a simple wet process10.35848/1347-4065/accba3 ↗
28. Towards high efficiency inversion layer cells based on ion-charged dielectrics
29. Activation of Al2O3 surface passivation of silicon: separating bulk and surface effects10.1016/j.apsusc.2023.158786 ↗
30. The effect of sample edge recombination on the averaged injection-dependent carrier lifetime in silicon10.1063/1.3691230 ↗
31. Long term stability of c-Si surface passivation using corona charged SiO210.1016/j.apsusc.2017.03.204 ↗
32. Decontamination effects of low-temperature plasma generated by corona discharge. Part I: an overview
33. Enhancing dielectric-silicon interfaces through surface electric fields during firing10.1016/j.solmat.2024.112799 ↗
34. Corona charge in SiO2: Kinetics and surface passivation for high efficiency silicon solar cells10.1016/j.egypro.2016.07.090 ↗
35. Ion transport phenomena in insulating films10.1063/1.1703105 ↗
36. Temperature dependence of conductivity of silicon-silicon dioxide interface10.1016/0038-1101(65)90029-8 ↗
37. Electrical conductivity of silicon dioxide thermally grown on silicon10.1149/1.2113993 ↗
38. Reliability limits for the gate insulator in CMOS technology10.1147/rd.462.0265 ↗
39. Characterisation of corona‐charged oxide‐passivated silicon
40. Atomic layer deposition of hafnium oxide passivating layers on silicon: impact of precursor selection10.1002/pssr.202400202 ↗
41. Atomic-layer-deposited aluminum oxide for the surface passivation of high-efficiency silicon solar cells
42. Near-unity quantum efficiency of broadband black silicon photodiodes with an induced junction10.1038/nphoton.2016.226 ↗
43. Ion‐charged dielectric nanolayers for enhanced surface passivation in high efficiency photovoltaic devices10.1002/admi.202300037 ↗
44. Oxide-nitride nanolayer stacks for enhanced passivation of p-type surfaces in silicon solar cells10.1016/j.solmat.2024.113231 ↗