Efficacy of passive cooling panels for silicon photovoltaic mini-modules using phase change material and expanded graphite
Source abstract
Abstract
This study details the effectiveness of Phase Change Material (PCM) composite panels to improve the performance of solar devices through passive cooling realized by the phase transition in the range 30–50 °C. PCM-based panels (70 g) of thermal energy capacity 11–15 kJ (143–195 J/cm 3 ) were obtained with three organic PCMs impregnating expanded graphite (EG). Commercial PV mini-modules were compared in outdoor experiments, with PCM panels at single, double or triple layer, by using dedicated 3D printed housings to position the panels in contact with the solar devices. Tests under sunlight exposure were conducted in Trento (Italy, 46° N, 11° E) during summer 2024 to estimate the efficiency increase. Thermal management parameters were used to quantify the positive performance of PCM panels in minimizing the maximum temperature, and to compare with literature data. In particular, the results were correlated to different temperature coefficient to extend the validity to a broader case history. The module temperature could be decreased by 15–30°C for hours, in some cases completely smoothing the daily temperature peak, guaranteeing an output energy enhancement of up to 11 %. The integrity of the panels was maintained during all the period of sunlight exposure. The obtained results of passive cooling have positively confirmed that these panels can be placed in contact with the PV devices by exploiting the unused empty space commonly present on the back side of PV panels and can be used either for new installations or for the retrofitting of existing systems.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Photovoltaic System Optimization Techniques · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. N. Vanni, M. Calora, L. Mercurio, A. Giuri, A.P. Caricato, V. Chierchia, C. Carati, R. Po, P. Biagini, S. Valastro, E. Smecca, G. Mannino, A. Alberti, A. Rizzo, Ambient air deposition allows reaching record light use efficiency in FAPbI3 perovskite solar cells, Adv. Sci.,12 (2025)2501533.10.1002/advs.202501533 ↗
2. Alliance · 2023
3. A review of the environmental factors degrading the performance of silicon wafer-based photovoltaic modules: failure detection methods and essential mitigation techniques10.1016/j.rser.2019.04.024 ↗
4. Physics of the temperature coefficients of solar cells10.1016/j.solmat.2015.03.025 ↗
5. Solar PV energy: from material to use, and the Most commonly used techniques to maximize the power output of PV systems: a focus on solar trackers and floating solar panels10.1016/j.egyr.2022.09.054 ↗
6. Advanced cooling techniques of P.V. modules: a state of art10.1016/j.csite.2020.100674 ↗
7. Overview of recent solar photovoltaic cooling system approach10.3390/technologies12090171 ↗
8. A comprehensive review on development of eutectic organic phase change materials and their composites for low and medium range thermal energy storage applications10.1016/j.solmat.2020.110955 ↗
9. Phase change materials for photovoltaic thermal management10.1016/j.rser.2015.03.050 ↗
10. Recent progress in photovoltaic thermal phase change material technology: a review10.1016/j.est.2023.107317 ↗
11. Enhancement of photovoltaic module performance by thermal management using shape-stabilized PCM composites10.1016/j.solmat.2024.112948 ↗
12. PCM-assisted energy storage systems for solar-thermal applications: review of the associated problems and their mitigation strategies10.1016/j.est.2023.107912 ↗
13. Evaluation of carbon based-supporting materials for developing form-stable organic phase change materials for thermal energy storage: a review10.1016/j.solmat.2022.111896 ↗
14. Flexible phase change materials with enhanced tensile strength, thermal conductivity and photo-thermal performance10.1016/j.solmat.2020.110728 ↗
15. Energy harvesting and storage blocks based on 3D oriented expanded graphite and stearic acid with high thermal conductivity for solar thermal application10.1016/j.energy.2022.124198 ↗
16. Expanded Graphite (EG) Stabilization of Stearic and Palmitic Acid Mixture for Thermal Management of Photovoltaic Cells
17. Characterization of a novel sustainable shape stabilized phase change material based on oil ash for photovoltaic thermal management10.1016/j.solener.2025.113455 ↗
18. Shape-Stabilized phase change materials with expanded graphite for thermal management of photovoltaic cells: selection of materials and preparation of panels10.3390/app15084352 ↗
19. Effects of Cavity-Shapes in 3D printed PCM encapsulation plates on sustainable thermal energy efficiency in buildings
20. Long-term experimental testing of phase change materials as cooling devices for photovoltaic modules10.1016/j.solmat.2024.113133 ↗
21. A statistical analysis of the temperature coefficients of industrial silicon solar cells10.1016/j.egypro.2014.08.029 ↗
22. Study of temperature coefficients for parameters of photovoltaic cells10.1155/2018/5945602 ↗
23. Integration of two-dimensional materials-based perovskite solar panels into a stand-alone solar farm10.1038/s41560-022-01035-4 ↗
24. The evaluation of cross-plane/in-plane thermal diffusivity using laser flash apparatus10.1016/j.tca.2017.04.011 ↗
25. High density polyethylene with phase change materials for thermal energy management10.20517/energymater.2024.112 ↗
26. Thermal diffusivity and conductivity of polyolefins by thermal lens technique10.3390/polym14132707 ↗
27. Clothing color effect as a target of the smallest scale climate change adaptation10.1007/s00484-024-02726-1 ↗
28. Solar photovoltaic cells performance improvement by cooling technology: an overall review10.1016/j.ijhydene.2020.12.164 ↗
29. A review of passive cooling of photovoltaic devices
30. Investigation of pork fat as potential novel phase change material for passive cooling applications in photovoltaics10.1016/j.jclepro.2017.09.164 ↗
31. Improving the thermal regulation and efficiency enhancement of PCM-Integrated PV modules using nano particles10.1016/j.enconman.2018.04.035 ↗
32. Performance enhancement of a photovoltaic module by passive cooling using phase change material in a finned container heat sink10.1016/j.solener.2019.11.053 ↗
33. Effect of novel PCM encapsulation designs on electrical and thermal performance of a hybrid photovoltaic solar panel10.1016/j.solener.2020.05.062 ↗
34. Evaluation of nanostructured GNP and CuO compositions in PCM-based heat sinks for photovoltaic systems10.1016/j.est.2022.105240 ↗
35. Techno-economic assessment of a photovoltaic module integrated with a two-layer phase change material unit10.1016/j.est.2022.104243 ↗
36. Thermal control of crystalline silicon photovoltaic (c-Si PV) module using Docosane phase change material (PCM) for improved performance10.1016/j.solener.2022.02.001 ↗
37. A novel thermal regulation of photovoltaic panels through phase change materials with metallic foam-based system and a concise comparison: an experimental study
38. Performance enhancement of PV panels using phase change material (PCM): an experimental implementation10.1016/j.csite.2023.102741 ↗
39. Experimental study on ultrasonic-assisted PCM cooling: a novel approach to photovoltaic panel performance improvement10.1016/j.applthermaleng.2025.125642 ↗
40. Preparation, thermal properties and thermal reliability of palmitic acid/expanded graphite composite as form-stable PCM for thermal energy storage10.1016/j.solmat.2008.11.057 ↗
41. High latent heat stearic acid impregnated in expanded graphite10.1016/j.tca.2018.03.018 ↗
42. Stearic acid/expanded graphite composite phase change material with high thermal conductivity for thermal energy storage10.1016/j.egyr.2022.03.172 ↗
43. Study on the reliability and stability of fatty acid-paraffin ternary phase change materials as energy-saving materials10.1002/slct.202303114 ↗