Thermomechanical damages in the vicinity of wires in photovoltaics assemblies exposed to large amplitude thermal cycling
Source abstract
Abstract
The advent of low Earth orbit constellations triggers a renewed interest in silicon-based space photovoltaic assemblies (PVA). However, given the harsh operational conditions in orbit, terrestrial silicon technologies need adaptations to gain reliability in space environments. This work focuses on the effects of -120 ° C /+120 ° C atmospheric pressure thermal cycling (APTC) on wire-interconnected Si PVA. Glass-glass laminates with varying adhesive thicknesses were manufactured, and their APTC failure modes analyzed. This experimental work demonstrated that glass cracks above wires and cell cracks under wires appear with thin adhesive layers, while PVA with a thicker adhesive did not experience such failures. To gain insight into the thermomechanics in the vicinity of interconnection wires during thermal cycling, an analytical and a finite element models were developed. In good agreement with experimental observations, it was found that reducing the adhesive thickness reduces damages in the cell and glass. Furthermore, to keep PVA lightweight, the analytical model shows that wire diameter reduction allows similar stress mitigation. Other paths are also discussed, such as glass thickness and adhesive shear modulus reductions along with improved wires alignments. Finally, comparable issues can occur in standard terrestrial modules; the problem being quite generic, model and design rules reported here are believed to be relevant to tackle them as well.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Laser Material Processing Techniques · Advancements in Semiconductor Devices and Circuit Design
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Wohlgemuth · 2020
2. Bailey · 2022
3. Enabling the measurement of thermomechanical stress in solar cells and PV modules by confocal micro-Raman spectroscopy10.1016/j.solmat.2019.01.028 ↗
4. Numerical investigation on residual stress in photovoltaic laminates after lamination10.1007/s12206-015-0125-y ↗
5. Numerical simulation of the evolution of stress in solar cells during the entire manufacturing cycle of a conventional silicon wafer based photovoltaic laminate10.1109/JPHOTOV.2017.2775158 ↗
6. Mechanical and thermomechanical assessment of encapsulated solar cells by finite-element-simulation
7. Thermomechanical design rules for photovoltaic modules10.1002/pip.3624 ↗
8. Root cause analysis of solar cell cracks at shingle joints10.1016/j.solmat.2022.111590 ↗
9. Integrated lightweight, glass-free PV module technology for box bodies of commercial trucks
10. Broken metal fingers in silicon wafer solar cells and PV modules10.1016/j.solmat.2012.09.013 ↗
11. J.H. Wohlgemuth, P. Hacke, N. Bosco, D.C. Miller, M.D. Kempe, S.R. Kurtz, Assessing the Causes of Encapsulant Delamination in PV Modules, in: 2017 IEEE 44th Photovoltaic Specialist Conference, 2017.
12. Ribbons lengthening induced by thermal cycling in PV modules part I: Cell-ribbon mechanical interaction through the solder
13. Stress and strain within photovoltaic modules using the finite element method: A critical review10.1016/j.rser.2021.111022 ↗
14. Ribbons lengthening induced by thermal cycling in PV modules, part II: Glass-ribbon mechanical interaction through the encapsulant
15. 2014
16. Eitner · 2011
17. Mechanical behaviour and fatigue of copper ribbons used as solar cell interconnectors
18. A critical comparison of shear tests for adhesive joints10.1016/j.ijadhadh.2018.02.035 ↗
19. VDMA · 2024
20. Characterization, accelerated life testing, and finite element modeling of low temperature solder wire interconnect degradation mechanisms10.1002/pip.70011 ↗
21. Comparison of the 60Sn40Pb and 62Sn2Ag36Pb solders for a PV ribbon joint in photovoltaic modules using the thermal shock test10.3390/en10040529 ↗
22. What is the Young’s modulus of silicon?10.1109/JMEMS.2009.2039697 ↗
23. Peeling off an adhesive layer with spatially varying modulus10.1103/PhysRevE.81.021603 ↗
24. Adhesion-induced instability patterns in thin confined elastic film10.1021/la026932t ↗