journal article·2025-04Open access

Photovoltaic cable jackets A comparison of representative products using combined-accelerated stress testing

David C. Miller, Rachael L. Arnold, Peter L. Hacke, Aubrey Jackson, Chun-Sheng Jiang, Steven C. Hayden, Helio Moutinho, Jimmy M. Newkirk, Greg Perrin, Laura T. Schelhas, Kent Terwilliger, Soňa Uličná

Abstract

Photovoltaic (PV) cables facilitate the distribution of electricity collected from modules to the energy grid. Durable cabling enables continuous operation of PV installations, whereas cables with a lifetime less than the modules must be replaced—reducing electricity generation and adding to the operating expense. This study primarily focusses on the aging of the key cable types using the combined-accelerated stress testing (C-AST) protocol. Representative cables for utility, building, and control/auxiliary applications were examined. Cable jacket materials examined include: polyolefin, polyethylene, polyamide, poly(vinyl chloride), chlorinated polyethylene, thermoplastic elastomer, and ethylene propylene diene monomer rubber. Specimen characterizations applied include: optical microscopy, mechanical profilometry, instrumented indentation, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). A variety of performance and durability characteristics were observed, depending on the base material, polymer formulation, and jacket color. The results from C-AST are analyzed and discussed relative to a recent industry survey on electronic balance of system components in addition to a recent study where similar cables were aged using steady state ultraviolet weathering (International Electrotechnical Commission Technical Specification 62788-7-2). Recommendations are made for the screening, industry qualification, and service life prediction of PV cable jackets.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrical Fault Detection and Protection · Integrated Circuits and Semiconductor Failure Analysis · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Fire and solar PV systems – investigations and evidence
2. PV fires experiences in Italy: from forensic activities to fire risk assessment of existing and new PV plants
3. IEC 63543-2: Photovoltaic (PV) module safety qualification for DC system voltage up to 3 000 V DC - Part 2: requirements for testing,” Int. Electrotech. Comm.: Geneva, xxx in publication.
4. IEC 63126: Guidelines for qualifying PV modules, components and materials for operation at high temperatures
5. Degradation processes and mechanisms of PV wires and connectors
6. “NFPA 70 national electrical code,” national fire protection association
7. Photovoltaic cable connectors - a comparative assessment of the present state of the industry
8. Penalva · 2024 · 1
9. 2009
10. Water treeing in XLPE insulation at a combined DC and high frequency AC stress
11. Photovoltaic DC arc fault detector testing at Sandia National Laboratories
12. Differentiating series and parallel photovoltaic arc-faults
13. Fasthuber · 2023
14. IEC 62930: electric cables for photovoltaic systems with a voltage rating of 1,5 kV DC
15. EN 50618: electric cables for photovoltaic systems
16. UL 4703: UL standard for safety for photovoltaic wire
17. 2020 · 1
18. IEC 60227-1: polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: general requirements
19. IEC 60245-1: rubber insulated cables - rated voltages up to and including 450/750 V - Part 1: general requirements
20. IEC 62821-1: electric cables – halogen-free, low smoke, thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V – Part 1: general requirements
21. Int. Electrotech. Comm.: Geneva · 2004 · 1
22. Updated world map of the Köppen-Geiger climate classification
23. Acceleration factors for combined-accelerated stress testing of photovoltaic module materials10.1002/solr.202300068 ↗
24. 2021 · 1
25. 2017 · 1
26. Combined-accelerated stress testing system for photovoltaic modules
27. Accelerated aging of PV cables - the development of methods towards combined-accelerated stress testing
28. Thermophysical properties of matter - the TPRC data series
29. Viscoelastic material characterization and modeling of photovoltaic module packaging materials for direct finite-element method input
30. Miller · Photovoltaic cable jackets - durability lessons from accelerated testing and the industry · 2025 · 1
31. Use of indentation to study the degradation of photovoltaic backsheets10.1016/j.solmat.2019.110082 ↗
32. Practical consideration of mechanical measurements in cable diagnostics
33. Investigation of in-service degradation of a low voltage PVC cable
34. Thermal dehydrochlorination of pure PVC polymer: Part I—thermal degradation kinetics by thermogravimetric analysis
35. Damage function for poly(vinyl chloride) in heritage collections10.1016/j.polymdegradstab.2023.110329 ↗
36. Occurrence and fate of antimony in plastics10.1016/j.jhazmat.2019.121764 ↗
37. Examining impact of vapor-induced crosslinking duration on dynamic mechanical and static mechanical characteristics of silane-water crosslinked polyethylene compound
38. Material characterization of seven photovoltaic backsheets using seven accelerated test conditions
39. PV encapsulant formulations and stress test conditions influence dominant degradation mechanisms
40. 2021 · 1
41. 2021 · 1
42. IEC TS 63556: coupled-stress acceleration test sequence for photovoltaic modules and materials, Int. Electrotech. Comm. Geneva, xxx in publication.
43. Degradation in photovoltaic encapsulant transmittance: results of the second photovoltaic quality assurance Task force Task group 5 artificial weathering study
44. Kempe · 2024 · 1