journal article·2024-12

Study on the growth kinetics of Ag3Sn alloy layer and fatigue lifetime prediction of PV interconnection

Jun Chen, Yan Li, Chentong Zhang, Liuqing Huang, Xuetao Luo

Publisher page

Abstract

The electrical conductivity and reliability performances of modules remains a challenge for extending the life-cycling in the widely practical crystalline silicon photovoltaic. Photovoltaic module reliability is severely destroyed by the stress accumulation resulted from the non-stop growth of Ag 3Sn intermetallic compounds at the solder joint. The growth behavior and microstructural evolution of Ag 3Sn intermetallic compounds during continuous aging was thoroughly investigated, which provided a method for predicting the fatigue life of solder joints. The results indicated that the Ag 3Sn intermetallic compounds at the solder joint were formed by continuous diffusion between the brazing material and the Ag electrode in a porous silver electrode, which was significantly affected by temperature and time. When the stress of Ag 3Sn intermetallic compounds was less than 26.7 MPa, the equivalent Ag 3Sn thickness was greater than 1.67 μm. During the soldering process, a reasonable soldering force of 1.44 N was required, corresponding to an initial Ag 3Sn thickness of 1.67–3.02 μm. Moreover, the growth of the intermetallic compounds layer was found to be logarithmic with respect to time and exponential with temperature. Based on the dynamic model of Ag 3Sn and outdoor temperature data of typical cities in Munich, Taizhou, and Sydney with variable latitudes, the fatigue life of solder joints was accurately predicted through finite element analysis. The work provides a theoretical foundation for the precise categorization of photovoltaic modules in diverse applications.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Electrical Contact Performance and Analysis · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Evaluating the limits of solar photovoltaics (PV) in electric power systems utilizing energy storage and other enabling technologies10.1016/j.enpol.2007.03.004 ↗
2. Experimental investigation on performance comparison of PV/T-PCM system and PV/T system10.1016/j.renene.2017.11.094 ↗
3. Very high efficiency silicon solar cellss-cience and technology10.1109/16.791982 ↗
4. Lifetime evaluation of grid-connected PV inverters considering panel degradation rates and installation sites10.1109/TPEL.2017.2678169 ↗
5. Identifying PV module mismatch faults by a thermography-based temperature distribution analysis10.1109/TDMR.2014.2348195 ↗
6. Relation between degradation of polymeric components in crystalline silicon PV module and climatic conditions: a literature review10.1016/j.solmat.2018.12.027 ↗
7. Comparative investigation and analysis of delaminated and discolored encapsulant degradation in crystalline silicon photovoltaic modules10.1016/j.solener.2020.04.041 ↗
8. Solder joint failure modes in the conventional crystalline Si module10.1016/j.egypro.2014.08.010 ↗
9. Modeling, imaging and resistance analysis for crystalline silicon photovoltaic modules failure on thermal cycle test10.1016/j.engfailanal.2020.104818 ↗
10. A comprehensive study of intermetallic compounds in solar cell interconnections and their growth kinetics10.1016/j.egypro.2016.10.084 ↗
11. Enabling thin silicon technologies for next generation c-Si solar PV renewable energy systems using synchrotron X-ray microdiffraction as stress and crack mechanism probe10.1016/j.solmat.2014.07.029 ↗
12. Fault diagnosis of photovoltaic modules10.1002/ese3.255 ↗
13. Cracks in silicon photovoltaic modules: a review
14. Effect of glass phase on solder joint reliability in crystalline silicon photovoltaic modules10.1007/s10854-015-3429-x ↗
15. Application of infrared thermography for non-destructive inspection of solar photovoltaic module, J. Non Destr. Test
16. Effects of multiple reflows on interfacial reaction and shear strength of SnAgCu and SnPb solder joints with different PCB surface finishes10.1016/j.jallcom.2008.02.102 ↗
17. Microstructure evolution in Cu pillar/eutectic SnPb solder system during isothermal annealing10.1007/s12540-009-0815-4 ↗
18. Degradation of plated silicon solar module due to copper diffusion: the role of capping layer formation and contact adhesion10.1016/j.solmat.2020.110638 ↗
19. Ag3Sn compounds coarsening behaviors in micro-joints10.3390/ma11122509 ↗
20. Growth kinetic of Ag3Sn intermetallic compound in micro-scale Pb-free solder alloys under a temperature gradient10.1016/j.jallcom.2015.09.151 ↗
21. Early stage growth characteristics of Ag3Sn intermetallic compounds during solid-solid and solid-liquid reactions in the Ag-Sn interlayer system: experiments and simulations10.1016/j.jallcom.2014.08.082 ↗
22. Mechanism of Ag3Sn grain growth in Ag/Sn transient liquid phase soldering10.1016/S1003-6326(17)60080-3 ↗
23. Intermetallic compounds in solar cell interconnections: microstructure and growth kinetics10.1016/j.solmat.2016.08.039 ↗
24. On the general and special form of Fick's second law with concentration-dependent diffusion coefficients10.1016/0009-2614(88)80356-7 ↗
25. Effect of Ag3Sn nanoparticles and temperature on Cu6Sn5 IMC growth in Sn-xAg/Cu solder joints10.1016/j.materresbull.2017.11.022 ↗
26. Development of holmium doped eutectic Sn-Ag lead-free solder for electronic packaging10.1108/SSMT-10-2021-0064 ↗
27. Effect of TiO2 nanoparticles on the microstructure, mechanical and thermal properties of rapid quenching SAC355 lead-free solder alloy10.1108/SSMT-01-2022-0003 ↗
28. Aging characteristics of electroluminescent phosphors10.1063/1.1722720 ↗
29. Silicon solar cells and modules with front contact paste containing copper-based component10.1002/pip.3424 ↗
30. Microstructure evolution, IMC growth, and microhardness of Cu, Ni, Ag-microalloyed Sn-5Sb/Cu solder joints under isothermal aging10.1007/s10854-022-09210-9 ↗
31. Microstructure and mechanical properties of Pb-free Sn-3.0Ag-0.5Cu solder pastes added with NiO nanoparticles after reflow soldering process10.1016/j.matdes.2015.10.142 ↗
32. Effect of adding Sb on microstructure and adhesive strength of Sn-Ag solder joints10.1007/s11664-004-0034-9 ↗
33. Effect of tool rotational speed on force generation, microstructure and mechanical properties of friction stir welded Al-Mg-Cr-Mn (AA 5052-O) alloy10.1016/j.matdes.2014.10.043 ↗
34. Observation on microstructure and shear behavior of mortar due to thermal shock10.1016/j.cemconcomp.2021.104106 ↗
35. Flexible and stretchable capacitive sensors with different microstructures10.1002/adma.202008267 ↗