Thermal interdiffusion, microstructure and contact resistivity of NiOx/Ni/p+ poly-Si layer systems for perovskite/TOPCon tandem solar cells during annealing processes
Source abstract
Abstract
In a recently published article (Lange et al., 2023) [1], we envisioned and discussed a tandem solar cell concept based on a perovskite/TOPCon architecture in p-i-n configuration, that utilizes a p +/n + polycrystalline silicon (poly-Si) tunnel junction and NiO x as hole transport material of the perovskite top cell. A direct contact of NiO x to p + poly-Si is inevitable in such a device. We investigated that junction and reported how the contact resistivity of the NiO x/p + poly-Si junction can be improved by orders of magnitudes by intentionally inserting a nm-thin metallic Ni interlayer at that interface through the formation of nickel silicide. In this contribution, we present comprehensive data on layer stack morphology, composition and interdiffusion and the impact on the measured contact resistivity based on (scanning) transmission electron microscopy (STEM) coupled with energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) of model samples as well as the real contact structures. Diffusion and reaction processes in the NiO x/Ni/p + poly-Si layer stack are investigated during the annealing in the temperature range between 100 °C and 500 °C for varying Ni interlayer thicknesses of 0, 1.0 and 2.0 nm. Furthermore, two NiO x syntheses routes are investigated: sputter deposition (s-NiO x) and a wet-chemical approach (wc-NiO x). We correlate the improvement of contact resistivity for both systems and temperatures <300 °C in regard to contacts without metallic Ni interlayer with the observation of pinhole formation within the SiO z. We have observed that annealing the Ag/s-NiO x junctions above 300 °C under ambient air leads to rectifying contacts and high contact resistivities due to excessive interdiffusion of Ni, O and Ag.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and interfaces · Silicon and Solar Cell Technologies · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Enhancement of NiOx/poly‐Si contact performance by insertion of an ultrathin metallic Ni interlayer10.1002/pssa.202200882 ↗
2. Development of perovskite solar cells with >25% conversion efficiency10.1016/j.joule.2021.04.008 ↗
3. NREL, Best Research-Cell Efficiency Chart, accessed on 24 July 2023.
4. Reassessment of the limiting efficiency for crystalline silicon solar cells10.1109/JPHOTOV.2013.2270351 ↗
5. Perovskite/Si tandem solar cells: fundamentals, advances, challenges, and novel applications10.1002/sus2.25 ↗
6. Monolithic perovskite-silicon tandem solar cells: from the lab to fab?10.1002/adma.202106540 ↗
7. 23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability10.1038/nenergy.2017.9 ↗
8. Efficient tandem solar cells with solution-processed perovskite on textured crystalline silicon10.1126/science.aaz3691 ↗
9. Fully textured, production‐line compatible monolithic perovskite/silicon tandem solar cells approaching 29% efficiency10.1002/adma.202206193 ↗
10. Passivating and low-resistive poly-Si tunneling junction enabling high-efficiency monolithic perovskite/silicon tandem solar cells10.1063/1.5120552 ↗
11. Controlling diffusion in poly-Si tunneling junctions for monolithic perovskite/silicon tandem solar cells10.1109/JPHOTOV.2021.3101177 ↗
12. The race for the best silicon bottom cell: efficiency and cost evaluation of perovskite–silicon tandem solar cells10.1002/pip.3372 ↗
13. Charge carrier transport mechanisms of passivating contacts studied by temperature-dependent J-V measurements10.1016/j.solmat.2018.01.008 ↗
14. Monolithic perovskite/silicon tandem solar cells fabricated using industrial p‐type polycrystalline silicon on oxide/passivated emitter and rear cell silicon bottom cell technology10.1002/solr.202101066 ↗
15. Solution-Processed nickel oxide hole transport layers in high efficiency polymer photovoltaic cells10.1002/adfm.201202269 ↗
16. Thin film formation of wet chemically deposited NiOx and parasitic oxides at NiOx/Si interfaces during high-temperature annealing of selective contacts in perovskite/Si tandem solar cells10.1016/j.solmat.2022.111724 ↗
17. ITO/Ti/Au Ohmic contacts on n-type ZnO10.1063/1.2198513 ↗
18. Evolution of Si suboxides into Si nanocrystals during rapid thermal annealing as revealed by XPS and Raman studies10.1016/j.jcrysgro.2008.12.038 ↗
19. Kinetics of high‐temperature thermal decomposition of SiO2 on Si(100)10.1116/1.574564 ↗
20. Silicon oxide decomposition and desorption during the thermal oxidation of silicon10.1142/S0218625X99000081 ↗
21. Silicon dioxide defects induced by metal impurities10.1103/PhysRevB.41.5075 ↗
22. Microscopic structure of the SiO2/Si interface10.1103/PhysRevB.38.6084 ↗
23. Sputter reduction of oxides by ion bombardment during Auger depth profile analysis10.1002/sia.740150808 ↗
24. X-ray photoelectron spectroscopic chemical state quantification of mixed nickel metal, oxide and hydroxide systems10.1002/sia.3026 ↗
25. XPS calibration study of thin-film nickel silicides10.1002/sia.3050 ↗
26. Sputter deposition and XPS analysis of nickel silicide thin films10.1016/j.surfcoat.2009.03.001 ↗
27. On a “surfactant-like” behaviour of Ni/Ag(100) deposit10.1016/0039-6028(94)90449-9 ↗
28. Evolving surface morphology during epitaxy of NiO on Ag(001)10.1116/6.0001446 ↗
29. Fully textured monolithic perovskite/silicon tandem solar cells with 25.2% power conversion efficiency10.1038/s41563-018-0115-4 ↗