journal article·2025-10Open access

Gas bubbles and blisters in thin film cadmium selenide deposited by magnetron sputtering

R.C. Greenhalgh, A. Abbas, V. Kornienko, J.M. Walls

Abstract

Cadmium Selenide (CdSe) is a source of Selenium in CdSeTe/CdTe photovoltaic device fabrication. CdSe thin films have been deposited using pulsed DC magnetron sputtering. The thin films are high quality, compact with the columnar structure usually associated with sputtered thin films. The thin films exhibit mixed hexagonal and cubic phases due to the presence of stacking faults. Argon is observed to be present in the as-deposited films, implanted during film growth from the sputter-working gas. The thin films have been exposed to high temperature annealing treatments and to cadmium chloride (CdCl2) activation to assess microstructural changes that occur. After annealing, voids appear in the film caused by the growth of argon gas bubbles. This leads to blistering on the CdSe surface. The CdCl2 treatment causes even more serious void formation and surface blistering. Similar problems have been observed with sputtered CdTe thin films. Argon gas atoms are trapped in the growing films by stacking faults. When the stacking faults are removed by the high temperature treatments, the argon diffuses into gas bubbles. These bubbles continue to expand causing serious voiding and catastrophic blistering. Although, the phenomenon can be mitigated by increasing the substrate temperature and by reducing the deposition rate, argon gas bubbles are still formed. Voiding is a serious problem in photovoltaic device fabrication, but the problem can be resolved by using an evaporative deposition technique to avoid argon implantation. The use of sputter-deposition of CdTe and CdSe should be avoided in the fabrication of high efficiency photovoltaic devices.
Source: openalex_inverted_index · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · nanoparticles nucleation surface interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Polycrystalline CdTe photovoltaics with efficiency over 18% through improved absorber passivation and current collection10.1016/j.solmat.2017.11.031 ↗
2. Exceeding 20% efficiency with in situ group V doping in polycrystalline CdTe solar cells10.1038/s41560-019-0446-7 ↗
3. Enhancing the photo-currents of CdTe thin-film solar cells in both short and long wavelength regions10.1063/1.4901532 ↗
4. Recombination and bandgap engineering in CdSeTe/CdTe solar cells10.1063/1.5098459 ↗
5. Understanding the role of selenium in defect passivation for highly efficient selenium-alloyed cadmium telluride solar cells10.1038/s41560-019-0389-z ↗
6. Defect tolerance in as-deposited selenium-alloyed cadmium telluride solar cells
7. Selenium passivates grain boundaries in alloyed CdTe solar cells10.1016/j.solmat.2022.111595 ↗
8. Polycrystalline CdSeTe/CdTe absorber cells with 28 mA/cm2 short-circuit current10.1109/JPHOTOV.2017.2775139 ↗
9. Incorporation of CdSe layers into CdTe thin film solar cells10.1016/j.solmat.2018.03.010 ↗
10. Co-sublimation of CdSe(x)Te(1-x) layers for CdTe solar cells10.1016/j.solmat.2016.09.025 ↗
11. Effect of CdCl2 annealing treatment on structural and optoelectronic properties of close spaced sublimation CdTe/CdS thin film solar cells vs deposition conditions10.1016/j.tsf.2014.11.066 ↗
12. Effect of CdCl2 passivation treatment on microstructure and performance of CdSeTe/CdTe thin-film photovoltaic devices10.1016/j.solmat.2018.06.016 ↗
13. Grain boundaries in CdTe thin film solar cells: a review10.1088/0268-1242/31/9/093001 ↗
14. The roles of ZnTe buffer layers on CdTe solar cell performance10.1016/j.solmat.2015.12.019 ↗
15. Comparison of cadmium selenide thin films deposited by chemical bath and pulsed DC sputtering for use in cadmium telluride devices
16. Chemical bath deposition of thin film cadmium selenide for photoelectrochemical cells10.1149/1.2119741 ↗
17. Effects of annealing on cadmium selenide nanocrystalline thin films prepared by chemical bath deposition10.1016/j.jallcom.2010.07.106 ↗
18. Effect of Sb incorporation on the structural, optical, morphological and electrical properties of CdSe thin films deposited by electron beam evaporation technique10.1016/j.tsf.2018.05.041 ↗
19. Effect of incorporation of sulphur on the structural , morphological and optical studies of CdSe thin films deposited by solution processed spin coating technique10.1016/j.tsf.2018.12.005 ↗
20. Photoelectrochemical and solar cell studies of n-CdSe films grown by repeated electrodeposition cycles10.1016/0040-6090(91)90025-S ↗
21. Effect of microstructure on the photoactivity of thin film CdSe
22. Understanding the physical properties of CdCl2 treated thin CdSe films for solar cell applications10.1016/j.optmat.2019.01.001 ↗
23. High rate deposition of CdSe thin films by pulsed DC magnetron sputtering
24. Abbas
25. Image processing with ImageJ
26. The Powder Diffraction File: a quality materials characterization database10.1017/S0885715619000812 ↗
27. The scherrer formula for X-ray particle size determination10.1103/PhysRev.56.978 ↗
28. Characterization of sputtered CdSe thin films as the window layer for CdTe solar cells10.1016/j.mssp.2018.04.022 ↗
29. The effect of cadmium chloride treatment on close-spaced sublimated cadmium telluride thin-film solar cells10.1109/JPHOTOV.2013.2264995 ↗
30. Structural phase behavior in II–VI semiconductor nanoparticles10.1063/1.115458 ↗
31. Observation and first-principles calculation of buried wurtzite phases in zinc-blende CdTe thin films10.1063/1.1308062 ↗
32. Blistering of magnetron sputtered thin film CdTe devices
33. Inert gas cluster formation in sputter-deposited thin film CdTe solar cells10.1016/j.tsf.2019.137614 ↗
34. Inert gas bubble formation in magnetron sputtered thin-film CdTe solar cells: gas bubbles in magnetron sputtered CdTe
35. Absorber texture and the efficiency of polycrystalline thin film CdTe solar cells10.1016/j.tsf.2024.140277 ↗
36. Chlorine passivation of grain boundaries in cadmium telluride solar cells
37. Microscopic analysis of interdiffusion and void formation in CdTe (1–x) Se x and CdTe layers10.1021/acsami.0c09381 ↗
38. Diffusion and solid state reactions
39. High efficiency, magnetron sputtered CdS/CdTe solar cells10.1016/j.solener.2004.06.013 ↗
40. Compaan · 1994
41. Chlorine activated stacking fault removal mechanism in thin film CdTe solar cells: the missing piece10.1038/s41467-021-25063-y ↗
42. Evaporated CdSe for efficient polycrystalline CdSeTe thin-film solar cells10.1021/acsenergylett.4c02874 ↗