journal article·2025-09

Experimental and finite element modal analysis of photovoltaic modules for the design of next-generation vehicle-integrated PV applications

Bin Luo, Simone Gallas, Cynthia Micallef, Jonathan Govaerts, Konstantinos Gryllias, Jef Poortmans

Publisher page

Abstract

Being different from terrestrial photovoltaic (PV), vibration response is critical to PV modules for vehicle applications, as dynamic loads lead to vibration responses in VIPV modules, which must be carefully considered during the structural design phase to prevent noise and fatigue failure. In this work, the experimental modal analysis on conventional glass-based and novel composite-based, lightweight PV module structures is investigated. First, the modal frequencies and mode shapes are determined by experimental modal analysis on different module structures with/without solar cell strings. Based on the experimental results, the solar cells have negligible influence on vibration response of glass-based PV panels, whereas their influence is non negligible for the considered lightweight panels. The lightweight panels show a higher number of modal frequencies within the 0-120 Hz range and greater amplification factors for these modes compared to the glass-glass modules. The experimental results are used to update a finite element model and quantify its accuracy for the prediction of modal frequencies and shapes. The sensitivity analysis, based on the numerical modal, suggests the significance of skin material properties, i.e., thickness, Young's modulus and density. The findings highlight the challenges of implementing lightweight structures for vehicle applications and provide a fundamental understanding of vibration performance for next-generation VIPV applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: solar cell performance optimization · Photovoltaic System Optimization Techniques · Mechanical Engineering and Vibrations Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Terawatt-scale photovoltaics: transform global energy10.1126/science.aaw1845 ↗
2. Photovoltaics at multi-terawatt scale: waiting is not an option10.1126/science.adf6957 ↗
3. Yamazaki · 2023
4. Potential and challenges of vehicle integrated photovoltaics for passenger cars
5. Ultra-lightweight PV module design for building integrated photovoltaics
6. Impact of additional PV weight on the energy consumption of electric vehicles with onboard PV10.1109/JPHOTOV.2024.3359446 ↗
7. Proposal for a safety qualification program for vehicle-integrated PV modules10.3390/su132313341 ↗
8. IEC develops standards for vehicle-integrated photovoltaics,” pv magazine Int.. Accessed: May 22, 2024. [Online]. Available: https://www.pv-magazine.com/2024/04/30/iec-develops-standards-for-vehicle-integrated-photovoltaics/.
9. Development and thermo-mechanical reliability assessment of fiber reinforced polymers in lightweight PV modules towards vehicle-integrated photovoltaics10.1016/j.solmat.2023.112455 ↗
10. Development and testing of light-weight PV modules based on glass-fibre reinforcement10.1051/epjpv/2022007 ↗
11. Encapsulation strategies for mechanical impact and damp heat reliability improvement of lightweight photovoltaic modules towards vehicle-integrated applications10.1016/j.solmat.2024.112932 ↗
12. Vehicle NVH development process and technologies
13. Prediction of vibration induced damage in photovoltaic modules during transportation: finite element model and field study10.1088/2631-8695/ac3d12 ↗
14. “Impact of transportation on silicon wafer-based photovoltaic modules,”10.1002/pip.2768 ↗
15. Wind load and wind-induced vibration of photovoltaic supports: a review10.3390/su16062551 ↗
16. An analytical solution to free rectangular plate natural vibrations by beam modes – ordinary and missing plate modes10.21278/TOF.40301 ↗
17. Finite element modeling, analysis, and life prediction of photovoltaic modules
18. FEM-based development of novel back-contact PV modules with ultra-thin solar cells
19. FEM simulation of deformations in strings of shingled solar cells subjected to mechanical reliability testing
20. A. J. Beinert et al., “Thermomechanical Design Rules for the Development of Photovoltaic Modules.” PhD Dissertation, Karlsruher Institut für Technologie, Accessed: May 23, 2024. [Online]. Available: https://publikationen.bibliothek.kit.edu/1000142510.
21. Breukers · 2022
22. Design and multi‐objective optimization of the bumper beams prepared in long glass fiber‐reinforced polypropylene10.1002/pc.26026 ↗
23. Prediction of tensile strength of discontinuous carbon fiber/polypropylene composite with fiber orientation distribution10.1016/j.compositesa.2012.05.006 ↗
24. Measurement and simulation of vibrations of PV‐modules induced by dynamic mechanical loads10.1002/pip.1087 ↗
25. An experimental investigation into the use of scaling laws for predicting vibration responses of rectangular thin plates10.1016/j.jsv.2007.09.006 ↗
26. 2023
27. Modal assurance criterion10.1016/j.proeng.2012.09.551 ↗
28. Lauwagie · 2005