Finite element modeling and experimental validation of concentrator photovoltaic module based on surface Mount technology
Source abstract
Abstract
The development of renewable and clean energy such as concentrator photovoltaics (CPV) has been spurred by the scarcity of fossil fuels and their impact on global warming. However, CPV is expensive and complex to assemble, which has led to the creation of a new assembly method based on Surface Mount Technologies (SMT). In this study, we used Finite Element Model (FEM) to investigate and optimize thermal performance of such an assembly. We first fabricated and characterized a 4-solar cell CPV SMT module to enable comparison between experimental and FEM predicted temperatures. Following this validation, a parametric study was conducted. The model was extended to an infinite number of solar cells to guide the design of a large-scale SMT-based CPV module. The optimal dimensions were determined by identifying the module parameters that affect cell temperature, such as the area and thickness of the metal ribbon on the backside of the solar cell and metal coverage on the transparent glass Printed Circuit Board (PCB) on the frontside of the solar cell. Furthermore, the results of the parametric simulation have confirmed our previous findings, indicating that the module assembled using the simplified SMT method, with optimal dimensions of the metal ribbon, exhibits superior heat dissipation compared to the standard design based on wire bonding, due to the presence of metal on the glass printed circuit board. Further, this work demonstrates that by optimizing the SMT design with FEM, the temperature of the solar cells can be maintained below 80 °C.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: solar cell performance optimization · Solar Thermal and Photovoltaic Systems · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Solar cell efficiency tables (Version 61)10.1002/pip.3646 ↗
2. Performance of silicone-on-glass Fresnel lenses in EMCORE's Gen 3 high-concentration concentrator photovoltaic system
3. FLATCON® CPV module with 36.7% efficiency equipped with four-junction solar cells10.1002/pip.2568 ↗
4. Concentrator photovoltaics
5. « Challenges for thermal management and production technologies in concentrating photovoltaic (CPV) modules
6. Challenges in the design of concentrator photovoltaic (CPV) modules to achieve highest efficiencies10.1063/1.5046752 ↗
7. High-efficiency thin and Compact concentrator photovoltaics with micro-solar cells directly attached to lens Array
8. A new approach for A low cost CPV module design utilizing micro-transfer printing technology
9. Thin concentrator photovoltaic module with micro-solar cells which are mounted by self-align method using surface tension of melted solder
10. « Cost analysis: solder bumped flip chip versus wire bonding10.1109/6104.827520 ↗
11. Comparing flip-chip and wire-bond interconnection technologies
12. New triple-junction solar cell assembly process for concentrator photovoltaic applications
13. AZURSPACE, « Concentrator Triple Junction Solar Cell (0004357-00-01_3C44_AzurDesign_3x3.pdf) ». 4 janvier 2017. [En ligne]. Disponible sur: https://www.azurspace.com/images/products/0004357-00-01_3C44_AzurDesign_3x3.pdf.
14. SPECTROLAB, « CPV Point Focus Solar Cells, C4MJ Metamorphic Fourth Generation CPV Technology ». BOEING COMPANY, 16 juillet 2018. Consulté le: 21 août 2023. [En ligne]. Disponible sur: https://www.spectrolab.com/photovoltaics/C4MJ_40_Percent_Solar_Cell.pdf.
15. Kribus, « Equivalent circuit models for triple-junction concentrator solar cells10.1016/j.solmat.2011.10.013 ↗
16. Temperature accelerated life test on commercial concentrator III-V triple-junction solar cells and reliability analysis as a function of the operating temperature: temperature accelerated life test10.1002/pip.2461 ↗
17. Vers la compréhension des mécanismes de dégradation et de vieillissement des assemblages photovoltaïques pour des applications sous haute concentration
18. Thermal performance assessment and validation of high-concentration photovoltaic solar cell module10.1109/TCPMT.2011.2181165 ↗
19. Technical boundaries of micro-CPV module components: how small is enough?
20. Thermal analysis of passively cooled hybrid CPV module using Si cell as heat distributor10.1109/JPHOTOV.2018.2877004 ↗
21. Performance, limits and economic perspectives for passive cooling of High Concentrator Photovoltaics10.1016/j.solmat.2016.04.016 ↗
22. A review on recent development of cooling technologies for photovoltaic modules10.1007/s11630-020-1350-y ↗
23. Outdoor characterization of solar cells with Microstructured Antireflective coating in a concentrator photovoltaic Monomodule
24. 2017
25. Module encapsulation materials, processing and testing
26. Indoor and outdoor characterization of III-V/Ge solar cells assembled on glass substrate for concentrated photovoltaic applications
27. A review on the integration of radiative cooling and solar energy harvesting
28. A review on recent development of cooling technologies for concentrated photovoltaics (CPV) systems10.3390/en11123416 ↗
29. Rey‐stolle, Éd
30. Thermomechanical reliability assessment of solder joints in a photovoltaic module operated in a hot Climate10.1109/TCPMT.2019.2933057 ↗
31. Investigation of the thermal performance of high-concentration photovoltaic solar cell package