journal article·2024-08

Silicon heterojunction solar cells: Excellent candidate for low light illuminations

Rupendra Kumar Sharma, Abhinav Deep Pakki, Jakub Holovský

Publisher page

Abstract

The current solar cells and modules are marketed according to the behaviour at standard test conditions (STC), however, these devices are more often operated at lower irradiance levels. The dependence on illumination stems mainly from the voltage at the open circuit and at the maximum power point. The latter might also be strongly influenced by serial resistance, but that is more an engineering problem not addressed here. More fundamentally, the voltage is determined by quasi-Fermi levels at the contacts. In the case of unconstrained conductivity between the absorber and electrode, the quasi-Fermi levels are flat, and determined by their splitting in the absorber. Our analysis shows that the modulation doping mechanism working in Si heterojunction solar cell between the doped amorphous Si layer with a higher bandgap and crystalline absorber with a lower bandgap can, for certain parameter settings, lead to strongly depleted contact layer that limits conduction. This is a prerequisite for decoupling the quasi-Fermi level between contact and absorber and offers the possibility for additional voltage increase. Based on this understanding, we simulate a heterojunction solar cell with a varying thickness and doping of amorphous silicon p-type contact. We demonstrate that for a certain combination of thinner or lower-doped contact, higher efficiency at low illumination can be achieved compared to the technological baseline. This is fully in line with the experimental findings. This analysis is crucial not only for using solar cells for indoor applications but also for designing photovoltaic modules optimized for low irradiance, potentially increasing the level of self-sufficiency of buildings.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · solar cell performance optimization · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Determining the optimal standard test condition correction procedure for high‐throughput field I–V measurements of photovoltaic modules10.1002/pip.3457 ↗
2. Solar irradiance variability: comparisons of models and measurements10.1029/2019EA000693 ↗
3. Energy yield of perovskite solar cells: influence of location, orientation, and external light management10.1016/j.solmat.2021.111421 ↗
4. How changes in worldwide operating conditions affect solar cell performance10.1016/j.solener.2021.01.017 ↗
5. Performance of silicon heterojunction solar cells under low illumination conditions
6. Silicon heterojunction solar cells with up to 26.81% efficiency achieved by electrically optimized nanocrystalline-silicon hole contact layers10.1038/s41560-023-01255-2 ↗
7. Theoretical limiting‐efficiency assessment on advanced crystalline silicon solar cells with Auger ideality factor and wafer thickness modifications10.1002/pip.3790 ↗
8. Gao · 2023
9. Low light performance of mono-crystalline silicon solar cells
10. Transparent thin-film silicon solar cells for indoor light harvesting with conversion efficiencies of 36% without photodegradation10.1021/acsami.0c04517 ↗
11. Indoor thin‐film photovoltaics: progress and challenges10.1002/aenm.202000641 ↗
12. Highly resistive Cu (In, Ga) Se2 absorbers for improved low-irradiance performance of thin-film solar cells10.1016/j.tsf.2003.10.094 ↗
13. Performance comparison of CdTe thin film modules with c-Si modules under low irradiance10.1049/iet-rpg.2018.5479 ↗
14. CdTe solar cell performance under low-intensity light irradiance10.1016/j.solmat.2015.09.043 ↗
15. Energy harvesting for GaAs photovoltaics under low-flux indoor lighting conditions10.1109/TED.2016.2569079 ↗
16. Organic photovoltaic cells–promising indoor light harvesters for self-sustainable electronics10.1039/C7TA10875C ↗
17. Wide-gap non-fullerene acceptor enabling high-performance organic photovoltaic cells for indoor applications10.1038/s41560-019-0448-5 ↗
18. Multi-busbar solar cells and modules: high efficiencies and low silver consumption10.1016/j.egypro.2013.07.286 ↗
19. Solar cell improvement by using a multi busbar design as front electrode10.1016/j.egypro.2012.07.056 ↗
20. How thin practical silicon heterojunction solar cells could Be? Experimental study under 1 sun and under indoor illumination10.1002/solr.202100594 ↗
21. Optimized design of silicon heterojunction solar cells for field operating conditions10.1109/JPHOTOV.2019.2938449 ↗
22. Illumination-dependent requirements for heterojunctions and carrier-selective contacts on silicon10.1109/JPHOTOV.2020.2998900 ↗
23. New metric for carrier selective contacts for silicon heterojunction solar cells10.1016/j.solener.2022.08.047 ↗
24. Influence of a-Si: H/ITO interface properties on performance of heterojunction solar cells10.1016/j.egypro.2013.07.345 ↗
25. Silvaco · 2011 · 5
26. Simulation and optimization of metal-insulator-semiconductor inversion-layer silicon solar cells10.1109/16.877180 ↗