journal article·2023-05

Intermediate matching layer for light-induced performance and removable clip-on applications of four-terminal perovskite/silicon heterojunction tandem solar cells

Kanyanee Sanglee, Siwakorn Sakunkaewkasem, Channarong Piromjit, Methawee Nukunudompanich, Pongsakorn Kanjanaboos, Surawut Chuangchote, Supakij Suttiruengwong, Somboon Sahasithiwat, Amornrat Limmanee, Taweewat Krajangsang

Publisher page

Abstract

Perovskite/silicon tandem solar cells are one of the most efficient ways to improve the performance of the photovoltaic industry and should be viewed as a promising path in the photovoltaic field. The silicon photovoltaic modules have a lifespan of over 20 years, while the low device stability of perovskite solar cells (PSCs) remains a significant commercialization barrier. An air gap acts as an optical spacer layer for four terminal (4T) perovskite/silicon tandem cells, resulting in a loss of efficiency. Using polydimethylsiloxane (PDMS) as an intermediate matching layer (IML) and a clip-on design made of a PDMS-based material sandwiched between polyvinyl chloride (PVC) layers with the configuration of PVC/IML/PVC, this research not only achieved efficiency improvement of four-contact tandem solar cells but also greatly simplified disassembly of individual cells. The 4T perovskite/silicon heterojunction tandem cells with a clip-on design achieved the highest efficiency of 23.49% for the active area of 1 cm 2 , while the fully tandem configuration without a clip-on layer only exhibited a PCE of 22.83%. The clip-on technology has the potential to boost the current density of silicon heterojunction solar cells from 15.01 mA/cm 2 (for the filtered bottom cell with an air gap) up to 16.51 mA/cm 2 (for the filtered bottom cell with a clip-on). Therefore, this state-of-the-art allows for the removal of PSCs with a shorter lifespan while adhering two photovoltaic cells together securely and effectively.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Commercial progress and challenges for photovoltaics10.1038/nenergy.2015.15 ↗
2. Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 2610.1038/nenergy.2017.32 ↗
3. A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells10.1126/science.aad5845 ↗
4. Triple-halide wide–band gap perovskites with suppressed phase segregation for efficient tandems10.1126/science.aaz5074 ↗
5. Four‐terminal perovskite on silicon tandem solar cells optimal measurement schemes10.1002/ente.201901267 ↗
6. Reassessment of the limiting efficiency for crystalline silicon solar cells10.1109/JPHOTOV.2013.2270351 ↗
7. Opportunities and challenges for tandem solar cells using metal halide perovskite semiconductors10.1038/s41560-018-0190-4 ↗
8. ABX3 perovskites for tandem solar cells10.1016/j.joule.2017.09.017 ↗
9. Efficient and reproducible monolithic perovskite/organic tandem solar cells with low loss interconnecting layers10.1016/j.joule.2020.06.006 ↗
10. Monolithic perovskite/silicon tandem solar cell with> 29% efficiency by enhanced hole extraction10.1126/science.abd4016 ↗
11. Nano-optical designs for high-efficiency monolithic perovskite–silicon tandem solar cells10.1038/s41565-022-01228-8 ↗
12. 2022
13. Minimizing voltage loss in wide-bandgap perovskites for tandem solar cells10.1021/acsenergylett.8b02179 ↗
14. 27%‐Efficiency four‐terminal perovskite/silicon tandem solar cells by sandwiched gold nanomesh
15. Over 30% efficiency bifacial 4-terminal perovskite-heterojunction silicon tandem solar cells with spectral albedo
16. High efficiency 4-terminal perovskite/c-Si tandem cells10.1016/j.solmat.2018.07.032 ↗
17. Transparent electrodes consisting of a surface‐treated buffer layer based on tungsten oxide for semitransparent perovskite solar cells and four‐terminal tandem applications
18. Bifacial, color-tunable semitransparent perovskite solar cells for building-integrated photovoltaics10.1021/acsami.9b15488 ↗
19. Atomic layer deposition of metal oxides for efficient perovskite single-junction and perovskite/silicon tandem solar cells10.1039/D0RA00939C ↗
20. Room-temperature sputtered aluminum-doped zinc oxide for semitransparent perovskite solar cells10.1021/acsaem.0c01081 ↗
21. Charge-transfer induced multifunctional BCP: Ag complexes for semitransparent perovskite solar cells with a record fill factor of 80.110.1039/D1TA01180D ↗
22. Optical management of spacer layer of high-performance four-terminal perovskite/silicon tandem solar cells10.1016/j.solener.2021.09.018 ↗
23. Hybrid energy harvester with bi-functional nano-wrinkled anti-reflective PDMS film for enhancing energies conversion from sunlight and raindrops10.1016/j.nanoen.2019.104188 ↗
24. CH3NH3PbI3 planar perovskite solar cells with antireflection and self-cleaning function layers10.1039/C6TA01800A ↗
25. Effective radiative cooling with ZrO2/PDMS reflective coating10.1016/j.solmat.2021.111129 ↗
26. Moth-eye structured polydimethylsiloxane films for high-efficiency perovskite solar cells
27. End‐of‐life photovoltaic recycled silicon: a sustainable circular materials source for electronic industries10.1002/aesr.202100081 ↗
28. Challenges for commercializing perovskite solar cells10.1126/science.aat8235 ↗
29. Encapsulation and stability testing of perovskite solar cells for real life applications10.1021/acsmaterialsau.1c00045 ↗
30. Encapsulation and outdoor testing of perovskite solar cells: comparing industrially relevant process with a simplified lab procedure10.1021/acsami.1c14720 ↗
31. Toward stable monolithic perovskite/silicon tandem photovoltaics: a six-month outdoor performance study in a hot and humid climate10.1021/acsenergylett.1c01018 ↗
32. Flexibly assembled and readily detachable photovoltaics10.1039/C7EE01889D ↗
33. Degradation of thermally cured silicone encapsulant under terrestrial UV10.1016/j.solmat.2016.05.065 ↗
34. Elastomer application in microsystem and microfluidics
35. Enhancement of power conversion efficiency in GaAs solar cells with dual-layer quantum dots using flexible PDMS film10.1016/j.solmat.2012.05.003 ↗
36. Characterization of adjustable fluidic lenses and capability for aberration correction of defocus and astigmatism10.1016/j.ijleo.2012.01.019 ↗
37. Tunable solid-body elastomer lenses with electromagnetic actuation10.1364/AO.50.003268 ↗
38. Mechanical properties of silicones for MEMS10.1088/0960-1317/18/6/065008 ↗
39. Microelectromechanical systems (MEMS): fabrication, design and applications10.1088/0964-1726/10/6/301 ↗
40. Heat treatment of commercial polydimethylsiloxane PDMS precursors: Part I. towards conversion of patternable soft gels into hard ceramics10.1016/j.ceramint.2018.12.106 ↗
41. Effect of metal electrodes on aging-induced performance recovery in perovskite solar cells10.1021/acsami.9b14619 ↗
42. Perovskite-silicon tandem solar modules with optimised light harvesting10.1039/C8EE00237A ↗
43. Monolithic perovskite/silicon tandem photovoltaics with minimized cell-to-module losses by refractive-index engineering10.1021/acsenergylett.2c01142 ↗
44. Balancing electrical and optical losses for efficient 4-terminal Si-perovskite solar cells with solution processed percolation electrodes10.1039/C7TA10945H ↗