Sputter-deposited CdMgTe for rear contact to CdSeTe/CdTe solar cells
Source abstract
Abstract
CdTe-based photovoltaic device performance improvement is predominantly limited by open-circuit voltage. This work approaches the voltage deficit challenge through the incorporation of a cadmium magnesium telluride (CdMgTe) electron reflector layer at the back of 1.5- μm CdSeTe/CdTe absorbers to reduce back-surface recombination through a conduction band offset. A sputtered CdMgTe electron reflector layer permitted low fabrication temperatures and circumvented the intolerance of CdMgTe to thermal processing present in traditional close-space sublimation (CSS)-deposited CdMgTe devices. We demonstrate that sputtered CdMgTe simultaneously promotes the retention of chlorine passivation and magnesium which is not feasible with CSS fabrication. We also show the importance of the Cu and Te back contact order in CdMgTe devices. Through the optimization of the sputtered CdMgTe substrate temperature, doping, and back structure configuration, 1.5 μm CdSeTe/CdTe devices with a sputtered CdMgTe layer achieved an efficiency of 16.0%, significantly higher than with CSS CdMgTe, and demonstrated partial enactment of electron-reflector behavior.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · solar cell performance optimization · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Solar cell efficiency tables (version 55)
2. Thin-film solar cells with 19% efficiency by thermal evaporation of CdSe and CdTe10.1021/acsenergylett.9b02836 ↗
3. Interface engineering for 25% CdTe solar cells
4. Tailoring MgZnO/CdSeTe interfaces for photovoltaics10.1109/JPHOTOV.2018.2877982 ↗
5. Polycrystalline CdTe photovoltaics with efficiency over 18% through improved absorber passivation and current collection10.1016/j.solmat.2017.11.031 ↗
6. Interface modification to enhance electron extraction by deposition of a ZnMgO buffer on SnO2-coated FTO in CdTe solar cells10.1016/j.solener.2018.11.053 ↗
7. Rapid thermal annealing on ZnMgO window layer for improved performance of CdTe solar cells10.1016/j.solmat.2018.06.033 ↗
8. Incorporation of CdSe layers into CdTe thin film solar cells10.1016/j.solmat.2018.03.010 ↗
9. Understanding the role of selenium in defect passivation for highly efficient selenium-alloyed cadmium telluride solar cells10.1038/s41560-019-0389-z ↗
10. Polycrystalline CdSeTe/CdTe absorber cells with 28 ma/cm2 short-circuit current10.1109/JPHOTOV.2017.2775139 ↗
11. Status and potential of CdTe solar-cell efficiency10.1109/JPHOTOV.2015.2434594 ↗
12. Sputter-deposited oxides for interface passivation of CdTe photovoltaics10.1109/JPHOTOV.2017.2787021 ↗
13. Recombination velocity less than 100 cm/s at polycrystalline Al2O3/CdSeTe interfaces10.1063/1.5030870 ↗
14. High-efficiency p+-n-n+ back-surface-field silicon solar cells10.1063/1.90311 ↗
15. Physics underlying the performance of back-surface-field solar cells10.1109/T-ED.1980.19937 ↗
16. Thin p++ μc-Si layers for use as back surface field in p-type silicon heterojunction solar cells10.1016/j.jnoncrysol.2006.01.070 ↗
17. A new electric field effect in silicon solar cells10.1063/1.1662040 ↗
18. HITTM cells—high-efficiency crystalline Si cells with novel structure10.1002/1099-159X(200009/10)8:5<503::AID-PIP347>3.0.CO;2-G ↗
19. Tobıas · 2011 · 265
20. 29.5%-efficient GaInP/GaAs tandem solar cells10.1063/1.112171 ↗
21. A comparative study of BSF layers for GaAs-based single-junction or multijunction concentrator solar cells10.1088/0268-1242/21/10/003 ↗
22. High-efficiency GaInP/GaAs/InGaAs triple-junction solar cells grown inverted with a metamorphic bottom junction10.1063/1.2753729 ↗
23. Back surface band gap gradings in Cu(In,Ga)Se2 solar cells10.1016/S0040-6090(00)01726-0 ↗
24. Band-gap grading in Cu(In,Ga)Se2 solar cells10.1016/j.jpcs.2005.09.087 ↗
25. The effect of Ga-grading in CIGS thin film solar cells10.1016/j.tsf.2004.11.080 ↗
26. Electron reflector to enhance photovoltaic efficiency: application to thin-film CdTe solar cells10.1002/pip.1143 ↗
27. Hsiao · 2010
28. Sputtered aluminum oxide and p+ amorphous silicon back-contact for improved hole extraction in polycrystalline CdSexTe1−x and CdTe photovoltaics
29. Exceeding 20% efficiency with in situ group V doping in polycrystalline CdTe solar cells10.1038/s41560-019-0446-7 ↗
30. Overcoming carrier concentration limits in polycrystalline CdTe thin films with in situ doping10.1038/s41598-018-32746-y ↗
31. CdSexTe1−x/CdTe devices with reduced interface recombination through novel back contacts and group-V doping
32. Energy-band barrier to improve open-circuit voltage of CdTe solar cells10.1016/j.solmat.2013.10.015 ↗
33. Characterization of thin CdTe solar cells with a CdSeTe front layer10.1557/adv.2019.332 ↗
34. Close-space sublimation-deposited ultra-thin CdSeTe/CdTe solar cells for enhanced short-circuit current density and photoluminescence10.3791/60937 ↗
35. CdTe solar cells with open-circuit voltage breaking the 1 V barrier10.1038/nenergy.2016.15 ↗
36. Progress towards a CdS/CdTe solar cell implementing an electron reflector
37. Coevaporated Cd1−xMgxTe thin films for CdTe solar cells10.1016/j.renene.2019.05.139 ↗
38. Incorporation of Cd1−xMgxTe as an electron reflector for cadmium telluride photovoltaic cells
39. CdMgTe as an electron reflector for MgZnO/CdSeTe/CdTe solar cells
40. Deposition and characterization of Cd1−xMgxTe thin films grown by a novel cosublimation method10.1116/1.4863314 ↗
41. Michael Kephart · 2015
42. Single vacuum chamber with multiple close space sublimation sources to fabricate CdTe solar cells10.1116/1.4941071 ↗
43. Te layer to reduce the CdTe back-contact barrier10.1109/JPHOTOV.2017.2768965 ↗
44. Michael Raguse · 2015
45. Correlation of electroluminescence with open-circuit voltage from thin-film CdTe solar cells10.1109/JPHOTOV.2015.2417761 ↗
46. Bothwell · 2020
47. Carrier providers or killers: the case of Cu defects in CdTe10.1063/1.4986077 ↗
48. Linearity (commutativity and transitivity) of valence-band discontinuity in heterojunctions with Te-based II-VI semiconductors: CdTe, HgTe, and ZnTe10.1103/PhysRevLett.58.1127 ↗
49. Studies of sputtered ZnTe films as interlayer for the CdTe thin film solar cell10.1016/j.tsf.2004.11.073 ↗