journal article·2022-03

Investigating the reliability of electrically conductive adhesives for shingled photovoltaic Si modules

Hyungjin Son, Hyunsoo Lim, Jiyeon Moon, Dayoung Jun, Byeong-Kwon Ju, Sunghyun Kim

Publisher page

Abstract

This paper discusses the environmental stability of an electrically conductive adhesive (ECA) applied to shingled photovoltaic (PV) modules. This study aims to verify the degradation behavior of ECA joints when shingled PV modules are exposed to an accelerated aging test under hot and humid environmental conditions. To achieve this, we prepared shingled PV modules through an assembly process wherein five pre-cut crystalline silicon solar cells were bonded with a ECA paste cured by an infrared lamp, and then stored under damp heat (85 °C/85% RH) and high temperature (65 and 85 °C) conditions. To confirm the aging of the ECA, we determined the changes in the electrical resistance of the ECA and in the efficiencies of the shingled PV modules. Results suggest that the electrical properties of the ECA did not deteriorate under heat and moisture conditions, while the performance of the shingled modules degraded under the same conditions. It was confirmed that the degradation in performance was mainly due to a drop in the fill factor (FF) caused by current leakage. Physicochemical analyses of the samples revealed that Ag atoms, which diffused from the ECA joint to the Si wafer, acted as the shunt path for the solar cell. The bonding properties of the ECA joint to moisture were evaluated as well.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Silicon and Solar Cell Technologies · Photovoltaic Systems and Sustainability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Metallization of crystalline silicon solar cells for shingled photovoltaic module application10.1016/j.solener.2019.11.095 ↗
2. The effects of temperature and solders on the wettability between ribbon and solar cell10.1016/j.solmat.2008.10.005 ↗
3. Detection of soldering induced damages on crystalline silicon solar modules fabricated by hot-air soldering method10.1016/j.renene.2015.05.017 ↗
4. Toward a planar black silicon technology for 50 μm-thin crystalline silicon solar cells10.1364/OE.24.0A1224 ↗
5. Design of a solar cell electrode for a shingled photovoltaic module application10.1016/j.apsusc.2020.145420 ↗
6. Cure kinetics of electrically conductive adhesives for solar cell interconnection10.1109/JPHOTOV.2013.2270356 ↗
7. Electrical reliability of electrically conductive adhesive joints: dependence on curing condition and current density10.1016/S0026-2692(01)00007-6 ↗
8. Environmental aging effects on the durability of electrically conductive adhesive joints10.1016/S0143-7496(03)00027-7 ↗
9. Recent advances in isotropic conductive adhesives for electronics packaging applications10.1016/j.ijadhadh.2007.10.004 ↗
10. Environmental ageing effects on the electrical resistance of silver-epoxy electrically conductive adhesive joints to a molybdenum electrode
11. Electrical reliability of electrically conductive adhesive joints: dependence on curing condition and current density10.1016/S0026-2692(01)00007-6 ↗