Electrolyte and current density determines the fate of electrodeposited polythiophene from waveguide to photovoltaics
Source abstract
Abstract
Abstract Nucleation and growth process of electrodeposited polymer determine its morphology, thus its function and applicability. In this work, we show how minute changes in polymerization condition, like current density and electrolyte concentration, alter nucleation pattern of polythiophene. Different nucleation patterns in turn give rise to different morphology and functional properties. Polythiophene was electrochemically synthesized on indium tin oxide (ITO) using boron trifluoride diethyl etherate (BF3.Et2O) electrolyte. At constant current density (8 μA/cm2), 20 vol% electrolyte gives rise to dendritic structures, while pure electrolyte gives rise to uniform film. Similarly, if current density was increased (0.08–0.4 mA/cm2) in 20 vol% electrolyte, dendritic structures were completely suppressed and again uniform polymer film was obtained. Although electrical properties are compromised in the dendritic sample owing to the higher surface roughness, dendritic structures efficiently guide light and are shown to be a good candidate for photonic and energy applications. On the other hand; uniform polythiophene, obtained at high current density and electrolyte concentration shows enhanced redox capacity and electrical conductivity. Utilizing optical and electrical properties of smooth polythiophene films (without dendrites), basic photovoltaic (PV) device (Glass/ITO/PT/P3HT:PC61BM/Al) was constructed using electrochemically grown polythiophene as Hole-Transporting Layer (HTL). Fabricated device exhibits significant photovoltaic performance with comparable efficiencies of 0.98–1.24%. Such electrochemically grown polythiophene thin films can be a substitute for other HTLs (like PEDOT: PSS) in photovoltaic devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Conducting polymers in biomedical engineering10.1016/j.progpolymsci.2007.05.012 ↗
2. Recent advances in synthesis, physical properties and applications of conducting polymer nanotubes and nanofibers10.1016/j.progpolymsci.2011.04.001 ↗
3. Conducting polymer nanomaterials: electrosynthesis and applications10.1039/b816681c ↗
4. One-dimensional conducting polymer nanocomposites: synthesis, properties and applications10.1016/j.progpolymsci.2010.07.010 ↗
5. An indacenodithiophene–quinoxaline polymer prepared by direct arylation polymerization for organic photovoltaics10.1021/acs.macromol.5b02324 ↗
6. Conducting polymers in electronic chemical sensors10.1038/nmat768 ↗
7. Synthesis of light-emitting conjugated polymers for applications in electroluminescent devices10.1021/cr000013v ↗
8. Molecular understanding of organic solar cells: the challenges10.1021/ar900099h ↗
9. Enhanced photoluminescence and solar cell performance via lewis base passivation of organic-inorganic lead halide perovskites10.1021/nn5036476 ↗
10. Electrochemically synthesised conducting polymeric materials for applications towards technology in electronics, optoelectronics and energy storage devices10.1016/S0254-0584(99)00081-4 ↗
11. Toward an understanding of the formation of conducting polymer nanofibers10.1021/nn800272z ↗
12. Room-temperature nanosoldering of a very long metal nanowire network by conducting-polymer-assisted joining for a flexible touch-panel application10.1002/adfm.201203802 ↗
13. Guided growth of nanoscale conducting polymer structures on surface-functionalized nanopatterns10.1021/ja057500i ↗
14. Characteristics of the nucleation and growth of template-free polyaniline nanowires and fibrils10.1016/j.synthmet.2008.11.001 ↗
15. Self-assembly of amido-ended hyperbranched polyester films with a highly ordered dendritic structure10.1021/am504705c ↗
16. Tuning the morphology of electroactive polythiophene nano-structures10.1016/j.reactfunctpolym.2014.11.010 ↗
17. Fast electrochemistry of conductive polymer nanotubes: synthesis, mechanism, and application10.1021/ar7002094 ↗
18. Growth of polythiophene nano-walls and their unique electrochemical and optical properties10.1039/c4mh00016a ↗
19. Polydioxythiophene nanodots, nanowires, nano-networks, and tubular structures: the effect of functional groups and temperature in template-free electropolymerization10.1021/nn300737e ↗
20. Synthesis, optical and electrochemical properties of a new family of dendritic oligothiophenes10.1021/jo0619581 ↗
21. Morphology of template-grown polyaniline nanowires and its effect on the electrochemical capacitance of nanowire arrays10.1021/cm801028a ↗
22. Synthesis of hyperbranched polythiophenes containing tetrachloroperylene bisimide as bridging moiety for polymer solar cells10.1016/j.polymer.2014.09.046 ↗
23. Advances in molecular design and synthesis of regioregular polythiophenes10.1021/ar800130s ↗
24. Electrochemistry of poly(3,4-alkylenedioxythiophene) derivatives10.1002/adma.200300376 ↗
25. Enhanced molecular order in polythiophene films electropolymerized in a mixed electrolyte of anionic surfactants and boron trifluoride diethyl etherate10.1021/am201823g ↗
26. Conjugated poly(thiophenes): synthesis, functionalizatlon, and applications10.1021/cr00012a009 ↗
27. Synthetic principles for bandgap control in linear ð-conjugated systems10.1021/cr950257t ↗
28. A synergetic effect of molecular weight and fluorine in all-polymer solar cells with enhanced performance10.1002/adfm.201603564 ↗
29. Ternary solar cells with a mixed face-on and edge-on orientation enable an unprecedented efficiency of 12.1%10.1039/C6EE02851A ↗
30. Light-emitting polythiophenes10.1002/adma.200500461 ↗
31. Review on recent advances in polythiophene based photovoltaic devices10.1016/j.rser.2015.12.177 ↗
32. Green colouring electrochromic devices of water-soluble polythiophene10.1680/nme.14.00010 ↗
33. Vapor-phase polymerization of nanofibrillar poly (3,4- ethylenedioxythiophene) for supercapacitors10.1021/nn405595r ↗
34. Advances in molecular design and synthesis of regioregular polythiophenes10.1021/ar800130s ↗
35. Electrochemical polymerization of thiophenes in the presence of bithiophene or terthiophene-kinetics and mechanism of the polymerization10.1021/cm00017a026 ↗
36. Electrosynthesis of polythiophene nanowires and their application for sensing of chlorpromazine10.1149/2.0881409jes ↗
37. The solvation of acetonitrile10.1021/ja983878n ↗
38. Ionic reactions in acetonitrile
39. Properties of bases in acetonitrile as solvent. IV. Proton acceptor power and homoconjugation of mono and diamines10.1021/ja00950a006 ↗
40. A conducting polymer film stronger than aluminum10.1126/science.267.5200.994 ↗
41. Low potential electrochemical syntheses of heteroaromatic conducting polymers in a novel solvent system based on trifluroborate–ethyl ether10.1016/j.progpolymsci.2005.03.002 ↗
42. High-strength conducting polymers prepared by electrochemical polymerization in boron trifluoride diethyl etherate solution10.1002/(SICI)1521-4095(199909)11:13<1145::AID-ADMA1145>3.0.CO;2-T ↗
43. High quality electrochromic polythiophenes via BF3·Et2O electropolymerization10.1002/adfm.200304307 ↗
44. Electrosynthesis of poly(3-dodecyl thiophene) in acetonitrile with boron trifluoride diethyl etherate: the effect of the electrolyte on electrochemical impedance and morphology10.1149/2.005201jes ↗
45. Galvanic replacement mediated transformation of Ag nanospheres into dendritic Au-Ag nanostructures in the ionic liquid [BMIM][BF4]10.1039/B918866E ↗
46. Investigating the effect of ionic strength on the suppression of dendrite formation during metal electrodeposition10.1039/C7CP00839B ↗
47. Solvent effect on the nucleation and growth mechanisms of poly(thiophene)10.1016/S0013-4686(02)00685-0 ↗
48. Nucleation and growth mechanisms of poly(thiophene) Part 1. Effect of electrolyte and monomer concentration in dichloromethane10.1016/S0022-0728(97)00109-5 ↗
49. Nucleation and growth of poly(3,4-ethylenedioxythiophene) in acetonitrile on platinum under potentiostatic conditions10.1016/S0022-0728(99)00258-2 ↗
50. Nucleation and growth mechanisms during electropolymerization of substituted 3-alkylthiophenes10.1016/j.apsusc.2007.11.052 ↗
51. Electrochemical preparation of polythiophene in acetonitrile solution with boron fluoride–ethyl ether as the electrolyte10.1002/app.12648 ↗
52. Tunable nanopatterning of conductive polymers via electrohydrodynamic lithography10.1021/acsnano.6b01246 ↗
53. Electric-field-induced pattern morphologies in thin liquid films10.1002/adfm.200500470 ↗
54. Tuning thermoelectric performance by nanostructure evolution of a conducting polymer10.1039/C5TA07381B ↗
55. Conducting polymer nanostructures for photocatalysis under visible light10.1038/nmat4220 ↗
56. Progress on the morphological control of conductive network in conductive polymer composites and the use as electroactive multifunctional materials10.1016/j.progpolymsci.2013.07.007 ↗
57. Diffusion-limited aggregation, a kinetic critical phenomenon10.1103/PhysRevLett.47.1400 ↗
58. Diffusion limited aggregation: a paradigm of disorderly cluster growth10.1016/0378-4371(94)90503-7 ↗
59. Columnar Growth and Kinetic Roughening in Electrochemical Deposition10.1103/PhysRevLett.68.3741 ↗
60. Nucleation and growth of poly (3-methylthiophene) on indium-tin oxide glass by scanning tunneling microscopy10.1021/cm00027a010 ↗
61. Influence of hole-transport layers and donor materials on open-circuit voltage and shape of I-V curves of organic solar cells10.1002/adfm.201002669 ↗
62. Bilayer heterojunction polymer solar cells using unsubstituted polythiophene via oxidative chemical vapor deposition10.1016/j.solmat.2011.11.040 ↗
63. The effect of interfacial roughness on the thin film morphology and charge transport of high-performance polythiophenes10.1002/adfm.200701089 ↗
64. Interaction between thiophene and solvated lewis acids and the low-potential electrochemical deposition of a highly anisotropic conducting polythiophene film10.1021/ma9606925 ↗
65. Sample dependence of raman spectrum on polythiophene films10.1016/0379-6779(91)91595-2 ↗
66. Bulk heterojunctions based on native polythiophene10.1021/cm800431s ↗
67. Integration of carbon nanotubes as hole transport electrode in polymer/fullerene bulk heterojunction solar cells10.1016/j.tsf.2007.03.173 ↗
68. Effect of boric acid doped PEDOT:PSS layer on the performance of P3HT:PCBM based organic solar cells10.1016/j.synthmet.2015.11.010 ↗
69. Organic solar cells using few-walled carbon nanotubes electrode controlled by the balance between sheet resistance and the transparency10.1063/1.3103557 ↗