journal article·2013-09

Module structure for an organic photovoltaic device

Nam Su Kang, Byeong-Kwon Ju, Jae-Woong Yu

Publisher page

Abstract

Abstract The influence of module design on the performance of OPV modules was studied, especially longitudinal partition effects. Two different module designs were used, one with wider cells (8 mm) and one with narrower cells(3.7 mm).The narrow structure had a current extraction metal sub-electrode in the middle of the module, and a tandem series connection of 4 or 5 cells was used for a fixed total module area. The current density, fill factor, shunt resistance, and power conversion efficiency of the narrow cells were higher than those of the wide cells with a comparable length-to-width ratio. As the longitudinal partitioning of a cell increases, the performance of the device increases. However, the effective active area of the module decreases, so the total power output will decrease. The optimum length-to-width ratio of wide or narrow cells is between 16 and 18.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
2. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
3. For the bright future—bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
4. Polymer solar cells
5. Current challenge in organic photovoltaic solar energy convrsion10.1007/128_2011_219 ↗
6. Organic photovoltaics: challenge and opportunities10.1002/polb.23083 ↗
7. Stability of polymer solar cells10.1002/adma.201104187 ↗
8. Roll-to-roll fabrication area functional organic materials10.1002/polb.23192 ↗
9. Effect of thin gold interstitial-layer on the photovoltaic properties of tandem organic solar cell10.1246/cl.1990.327 ↗
10. Flexible, long-lived, large-area, organic solar cells10.1016/j.solmat.2006.10.013 ↗
11. Efficiency enhancement in large-area organic photovoltaic module using theoretical power loss model10.1016/j.solmat.2011.04.009 ↗
12. ITO-free wrap through organic soalr cells—a module concept for cost-efficient reel-to-reel production10.1016/j.solmat.2006.10.005 ↗
13. Large area plastic solar cell modules10.1016/j.mseb.2006.06.008 ↗
14. Organic solar cell modules for specific applications—from energy autonomous systems to large area photovoltaics10.1016/j.tsf.2007.12.093 ↗
15. Influence of polymer solar cell geometry on series resistance and device efficiency10.1002/pssa.200925315 ↗
16. Tipnis · Solar Energy Materials and Solar Cells · 2009 · 93 · 44210.1016/j.solmat.2008.11.018 ↗
17. Flexible polymer photovoltaic modules with incorporated organic bypass diodes to address module shading effects10.1016/j.solmat.2009.07.013 ↗
18. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
19. ITO-free flexible polymer soalr cells: from small model devices to roll-to-roll processed large modules, Organic Electronics, 12 (2011) 566–574.10.1016/j.orgel.2011.01.009 ↗
20. Life cycle assessment of ITO-free flexible polymer solar cells prepared by roll-to-roll coating and printing10.1016/j.solmat.2011.09.048 ↗
21. Highly efficient flexible inverted organic solar cells using atomic layer deposited ZnO as electron selective layer10.1039/B921396A ↗
22. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
23. Post-annealing effect upon optical properties of electron beam evaporated10.1016/j.apsusc.2008.10.069 ↗