Bandgap engineering of earth-abundant Cu2BaSn(S1-xSex)4 for photovoltaic application: A systematic approach to double grading
Source abstract
Abstract
The impact of the bandgap ( Eg ) grading of an earth-abundant multinary chalcogenide Cu 2BaSn(S 1-xSe x) 4 (CBTSSe) is investigated using numerical simulation. The baseline model of the cell with a power conversion efficiency (PCE) of 6.17 % is designed to match the performance of the fabricated cell. The Eg tuning is performed by compositional variation of Sulfur (S) and Selenium (Se). We investigate the single grading of the absorber by thoroughly optimizing the Eg at the boundaries using linear grading. Double grading of the absorber is performed by employing a parabolic grading profile to vary Eg inside the bulk of the absorber. Major improvements are noticed in performance parameters wherein (a) Open circuit voltage ( Voc ) is improved from 0.67 to 0.91 V, (b) short circuit current density ( Jsc) is improved from 16.4 to 21.28 mA/cm 2 after appropriate grading of the absorber and (c) the PCE of the cell is enhanced from 6.17 to 15.63 %. The effects on the performance parameters with different grading profiles are briefly discussed. The defects with different distribution profiles are studied for graded device. The inherent formation of MoS 2 and MoSe 2 layers are discussed, and the PCE of cell is improved to 16.31% due to formation of ohmic junction. We further propose to modify the Mo back contact with Ni to improve the PCE of the device up to 17.53%. This work presents a systematic approach to optimize Eg of the absorber and boost the advancement in CBTSSe-based photovoltaic devices.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Band tailing and efficiency limitation in kesterite solar cells, Appl
2. Trigonal Cu 2 -II-Sn-VI 4 (II = Ba, Sr and VI = S, Se) quaternary compounds for earth-abundant photovoltaics10.1039/C5CP06977G ↗
3. BaCu 2 Sn(S,Se) 4 : earth-abundant chalcogenides for thin-film photovoltaics10.1021/acs.chemmater.6b01832 ↗
4. Synthesis and characterization of photoelectrochemical and photovoltaic Cu 2 BaSnS 4 thin films and solar cells10.1039/C7TC01678F ↗
5. Oxygenated CdS buffer layers enabling high Open-circuit voltages in earth-abundant Cu2BaSnS4 thin-film solar cells10.1002/aenm.201601803 ↗
6. Earth‐abundant chalcogenide photovoltaic devices with over 5% efficiency based on a Cu 2 BaSn(S,Se) 4 absorber10.1002/adma.201606945 ↗
7. Solution-processed earth-abundant Cu 2 BaSn(S,Se) 4 solar absorber using a low-toxicity solvent10.1021/acs.chemmater.8b02556 ↗
8. Solution-processed trigonal Cu 2 BaSnS 4 thin-film solar cells10.1021/acsaem.8b00514 ↗
9. Solution deposited Cu 2 BaSnS 4– x Se x from a thiol–amine solvent mixture10.1021/acs.chemmater.7b03931 ↗
10. Solution phase fabrication of photoactive Cu2BaSnS4 thin films for solar energy harvesting10.1007/s10008-019-04418-y ↗
11. Optoelectronic and material properties of solution-processed Earth-abundant Cu2BaSn(S, Se)4 films for solar cell applications10.1016/j.nanoen.2020.105556 ↗
12. Top stack optimization for Cu 2 BaSn(S, Se) 4 photovoltaic cell leads to improved device power conversion efficiency beyond 610.1002/aenm.202201602 ↗
13. Earth-abundant trigonal BaCu 2 Sn(Se x S 1−x) 4 (x = 0–0.55) thin films with tunable band gaps for solar water splitting10.1039/C6TA06702F ↗
14. Controlled back slope of Ga/(In+Ga) profile in Cu(In,Ga)Se2 absorber fabricated by multi layer precursor method for improvement of its photovoltaic performance10.1016/j.solmat.2014.11.023 ↗
15. Band-gap tuning of Cu2ZnSn(S,Se)4 solar cell absorbers via defined incorporation of sulphur based on a post-sulphurization process10.1016/j.solmat.2018.03.033 ↗
16. Control of Ga distribution in Cu(in,Ga)Se 2 photovoltaic absorber by solid-state selenizatoin of CuGa/in/Se/in/CuGa stack10.1143/JJAP.51.10NC21 ↗
17. Properties of Cu(In,Ga)Se 2 solar cells with new record efficiencies up to 21.710.1002/pssr.201409520 ↗
18. Analysis of graded band gap solar cells with SCAPS
19. Characterization of graded CIGS solar cells10.1016/j.egypro.2010.07.009 ↗
20. Efficient and stable Pt/TiO 2/CdS/Cu 2 BaSn(S,Se) 4 photocathode for water electrolysis applications10.1021/acsenergylett.7b01062 ↗
21. Gradient conduction band energy engineering driven high‐efficiency solution‐processed Cu 2 ZnSn(S,Se) 4/Zn x Cd 1–x S solar cells
22. Zn 0.8 Cd 0.2 S@PCBM hybrid as an efficient electron transport layer for air‐processed p‐i‐n planar perovskite solar cells: improvement of interfacial electron transfer and device stability10.1002/solr.201800222 ↗
23. Understanding the light soaking effect of ZnMgO buffer in CIGS solar cells10.1039/C5CP01758K ↗
24. Rapid thermal annealing on ZnMgO window layer for improved performance of CdTe solar cells10.1016/j.solmat.2018.06.033 ↗
25. Deposition of transparent and conductive Al-doped ZnO thin films for photovoltaic solar cells10.1016/S0927-0248(96)00066-9 ↗
26. Optimisation of ZnO:Al films by change of sputter gas pressure for solar cell application10.1016/S0169-4332(02)00611-6 ↗
27. Efficient and stable Pt/TiO 2/CdS/Cu 2 BaSn(S,Se) 4 photocathode for water electrolysis applications10.1021/acsenergylett.7b01062 ↗
28. Long lifetimes in high-efficiency Cu(In,Ga)Se2 solar cells, Appl
29. Study of the junction and carrier lifetime properties of a spray-deposited CZTS thin-film solar cell10.1088/0268-1242/28/5/055001 ↗
30. Influence of copper composition on Cu 2 BaSn(S,Se) 4 solution-deposited films and photovoltaic devices with over 5% efficiency10.1021/acsaem.2c01364 ↗
31. The fabrication of Cu2BaSnS4 thin film solar cells utilizing a maskant layer10.1016/j.solener.2019.02.007 ↗
32. Optoelectronic property comparison for isostructural Cu 2 BaGeSe 4 and Cu 2 BaSnS 4 solar absorbers10.1039/D1TA05666B ↗
33. Earth-abundant orthorhombic BaCu 2 Sn(Se x S 1–x) 4 (x ≈ 0.83) thin film for solar energy conversion10.1021/acsenergylett.6b00324 ↗
34. Compound semiconductor alloys: from atomic-scale structure to bandgap bowing10.1063/1.4930002 ↗
35. Two-dimensional charge carrier distribution in MoS2 monolayer and multilayers10.1063/1.5078711 ↗
36. Effect of MoS2 interlayer on performances of copper-barium-tin-sulfur thin film solar cells via theoretical simulation10.1016/j.solener.2021.05.074 ↗
37. Characterization of metal contacts for two-dimensional MoS2 nanoflakes10.1063/1.4840317 ↗
38. Thermally driven crossover from indirect toward direct bandgap in 2D semiconductors: MoSe 2 versus MoS 210.1021/nl302584w ↗