Flexible and lightweight Cu(In,Ga)(S,Se)2 solar cell on a stainless steel substrate with different structures for improving band alignment
Source abstract
Abstract
Herein, the conduction band minimum (E C ) difference between the absorbing and buffer layers (named CBO) and that between the absorbing layer and the transparent conductive oxide (named ΔE C-TA) for the total band alignment of flexible and lightweight Cu(In,Ga)(S,Se) 2 (CIGSSe) solar cells on a stainless steel (SS) substrate with different structures were measured and optimized to improve their photovoltaic performances. Under different structures, the first buffer layers are Zn(O,S,OH) x, CdS, and (Cd,Zn)S, the second buffer layer is Zn 0.84Mg 0.16O, and the transparent conductive oxide (TCO) layer is Zn 0.88Mg 0.12 O:Al, leading to different CBO and ΔE C-TA values. According to theoretical and experimental examinations, the replacement of ZnO:B TCO by Zn 0.84Mg 0.16O buffer/Zn 0.88Mg 0.12O:Al TCO results in the improvement of band bending (reduced carrier recombination) in the device, which is attributed to E C values of Zn 0.84Mg 0.16O buffer/Zn 0.88Mg 0.12O:Al TCO being shallower than that of ZnO:B, thus improving ΔE C-TA. Moreover, the Zn(O,S,OH) x and (Cd,Zn)S buffers give rise to the improved CBO in the device. Ultimately, experimental conversion efficiency of 18.1% for the flexible and lightweight CIGSSe solar cell on the SS substrate was obtained through the use of (Cd,Zn)S as the first buffer, Zn 0.84Mg 0.16O as the second buffer, and Zn 0.84Mg 0.16O, Zn 0.88Mg 0.12O:Al as the TCO layer, leading to the optimized CBO value of −0.01 eV and ΔE C-TA value of +0.16 eV, which reduced carrier recombination; this was well verified by the predicted numerical result.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Cu(In,Ga)Se2 thin-film solar cells
2. Thin film solar cells with graded-bandgap photon-absorbing layer
3. Chantana · 2015
4. Properties of Cu(In,Ga)Se2 solar cells with New record efficiencies up to 21.710.1002/pssr.201409520 ↗
5. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.610.1002/pssr.201600199 ↗
6. Record efficiency for thin-film polycrystalline solar cells up to 22.9% achieved by Cs-treated Cu(In,Ga)(Se,S)210.1109/JPHOTOV.2018.2882206 ↗
7. Cd-Free Cu(In,Ga)(Se,S)2 thin-film solar cell with record efficiency of 23.3510.1109/JPHOTOV.2019.2937218 ↗
8. Transparent electrode and buffer layer combination for reducing carrier recombination and optical loss realizing over A 22%-efficient Cd-free alkaline-treated Cu(In,Ga)(S,Se)2 solar cell by the all-dry process10.1021/acsami.0c01980 ↗
9. Solar cell efficiency Tables (version 60)10.1002/pip.3595 ↗
10. Colorful, flexible, and lightweight Cu(In,Ga)Se2 solar cell by lift-off process with automotive painting10.1109/JPHOTOV.2018.2859743 ↗
11. Cu(In,Ga)Se2 solar cells on low cost mild steel substrates10.1016/j.solener.2017.12.057 ↗
12. Heat-light soaking treatments for high-performance CIGS solar cells on flexible polyimide foils
13. Cadmium carcinogenesis in review10.1016/S0162-0134(00)00009-X ↗
14. High-efficiency cadmium-free Cu(In,Ga)Se2 thin-film solar cells with chemically deposited ZnS buffer layers10.1109/16.792002 ↗
15. Improving the performance of solar cells with novel buffer structure by the chemical bath deposition technique10.1016/j.mssp.2016.09.044 ↗
16. New world record Cu(in,Ga)(Se,S)2 thin film solar cell efficiency beyond 22%
17. Alternative buffers for chalcopyrite solar cells10.1016/j.solener.2004.06.018 ↗
18. Buffer layers in Cu(in,Ga)Se2 solar cells and modules10.1016/j.tsf.2004.11.118 ↗
19. The Zn(S,O,OH)/ZnMgO buffer in thin-film Cu(In,Ga)(Se,S)2-based solar cells Part II: magnetron sputtering of the ZnMgO buffer layer for in-line Co-evaporated Cu(In,Ga)Se2 solar cells10.1002/pip.897 ↗
20. Song · 2006 · 534
21. Theoretical analysis of the effect of conduction band offset of window/CIS layers on performance of CIS solar cells using device simulation10.1016/S0927-0248(00)00266-X ↗
22. Band offset of high efficiency CBD-ZnS/CIGS thin film solar cells10.1016/S0040-6090(03)00265-7 ↗
23. Influence of conduction band minimum difference between transparent conductive oxide and absorber on photovoltaic performance of thin-film solar cell10.7567/JJAP.54.032301 ↗
24. Mg content impact of a sputtered Zn1-xMgxO:Al transparent electrode on photovoltaic performances of flexible, Cd-free, and all-dry-process Cu(In,Ga)(S,Se)2 solar cells10.1021/acsaem.1c03783 ↗
25. Total band alignment in theoretical and experimental aspects for enhanced performance of flexible and Cd-free Cu(In,Ga)(S,Se)2 solar cell fabricated by all-dry process10.1002/pip.3616 ↗
26. Structures of Cu(In,Ga)(S,Se)2 solar cells for minimizing open-circuit voltage deficit: investigation of carrier recombination rates10.1002/pip.3137 ↗
27. Cu(In,Ga)(S,Se)2 solar cell with Zn(O,S,OH)x buffer on stainless steel utilizing Zn1-xMgxO and Zn1-xMgxO:Al10.1021/acsaem.2c02814 ↗
28. Enhanced efficiency of Cd-free Cu(In,Ga)(Se,S)2 minimodule via (Zn,Mg)O second buffer layer and alkali metal post-treatment10.1109/JPHOTOV.2017.2745710 ↗
29. The role of Cu(InGa)(SeS)2 surface layer on a graded band-gap Cu(InGa)Se2 thin-film solar cell prepared by two-stage method
30. Cu(In,Ga)(Se,S)2 solar cell research in solar frontier: progress and current status10.7567/JJAP.56.04CA02 ↗
31. Improved Cu(In,Ga)(S,Se)2 thin film solar cells by surface sulfurization10.1016/S0927-0248(97)00054-8 ↗
32. Aging effect of a Cu(In,Ga)(S,Se)2 absorber on the photovoltaic performance of its Cd-free solar cell fabricated by an all-dry process: its carrier recombination analysis10.1002/aenm.201902869 ↗
33. Formation of native Inx(O,S)y buffer through surface oxidation of Cu(In,Ga)(S,Se)2 absorber for significantly enhanced conversion efficiency of flexible and Cd-free solar cell by all-dry process10.1002/solr.202200250 ↗
34. Recombination analysis of Cu(In,Ga)Se2 solar cells with low and high Ga compositions10.1016/j.solmat.2014.01.047 ↗
35. Reformulation of solar cell physics to facilitate experimental separation of recombination pathways10.1063/1.4819728 ↗
36. Investigation of correlation between open-circuit voltage deficit and carrier recombination rates in Cu(In,Ga)(S,Se)2-based thin-film solar cells10.1063/1.5023828 ↗
37. Modelling polycrystalline semiconductor solar cells10.1016/S0040-6090(99)00825-1 ↗
38. Design and in-depth characterization of absorber/buffer interface of CIGS solar cell: results of the EFFCIS Project
39. Cu(In,Ga)(S,Se)2 solar cell with Zn(O,S,OH)x buffer on stainless steel utilizing Zn1-xMgxO and Zn1-xMgxO:Al10.1021/acsaem.2c02814 ↗
40. Enhancement of photovoltaic performances of Cu(In,Ga)(S,Se)2 solar cell through combination of heat-light soaking and light soaking processes10.1002/pip.3031 ↗
41. Characteristics of Zn1-xMgxO:B and its application as transparent conductive oxide layer in Cu(In,Ga)(S,Se)2 solar cells with and without CdS buffer layer10.1016/j.solener.2019.04.029 ↗