journal article·2023-12

Temperature sensitivity of adjustable band gaps of Sb2(S, Se)3 solar cells via vapor transport deposition

Deyang Qin, Xingyu Pan, Rui Wang, Yanlin Pan, Youyang Wang, Jianing Zhang, Xiaolei Ding, Yuhao Chen, Shiqi Zheng, Shoujie Ye, Yuxin Pan, Guoen Weng, Xiaobo Hu, Jiahua Tao, Ziqiang Zhu, Junhao Chu, Hidefumi Akiyama, Shaoqiang Chen

Publisher page

Abstract

Quasi-one-dimensional antimony chalcogenide Sb 2(S, Se) 3 semiconductor is regarded as one of the most promising photovoltaic materials due to their high optical absorbance coefficient and tunable band gaps. However, current researchers rarely optimize experimental conditions based on characteristics of the Se/S ratio in Sb 2(S, Se) 3 material and ignore the experimental optimization based on material characteristics. Herein, Sb 2(S, Se) 3 thin films with three different Se/(Se + S) ratios (Se = 0.2, 0.5, 0.8) are prepared by vapor transport deposition (VTD) based on the temperature sensitivity of the evaporator source. The influence of VTD conditions of Sb 2(S, Se) 3 on optical properties, electrical properties, film quality, and defect characteristics are investigated through UV absorbance spectra, current density versus voltage ( J-V ) measurements, scanning electron microscopy (SEM), deep-level transient spectroscopy (DLTS), respectively. It is concluded that the deposition temperature is closely associated with the shift of the band gap. Moreover, different original Se/(Se + S) ratios yield different optimum temperatures (Se = 0.2, 480 °C; Se = 0.5, 500 °C; Se = 0.8, 520 °C), and optimum temperature increase with Se atom ratios. With optimization of the Se/(Se + S) ratio and deposition temperature, a Sb 2(S, Se) 3 solar cell (Se = 0.8) prepared under 520 °C has optimal light absorbance, longer carrier lifetime, and better film quality, displaying a high efficiency of 6.78%.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Phase-change materials and chalcogenides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Multi-junction III-V solar cells: current status and future potential10.1016/j.solener.2004.09.018 ↗
2. Antimony chalcogenide-based thin film solar cells: device engineering routes to boost the performance10.1063/5.0047429 ↗
3. Antimony selenide thin-film solar cells10.1088/0268-1242/31/6/063001 ↗
4. Controllable solution-phase epitaxial growth of Q1D Sb2(S, Se)3/CdS heterojunction solar cell with 9.2% efficiency10.1002/adma.202104346 ↗
5. Enhancing durability and photoelectrochemical performance of the earth abundant Ni-Mo/TiO2/CdS/CIGS photocathode under various pH conditions10.1002/cssc.201801211 ↗
6. Controlled activation of ZnTe: Cu contacted CdTe solar cells using rapid thermal processing10.1016/j.solmat.2014.10.045 ↗
7. Wide bandgap Cu(In, Ga)Se2 solar cells with improved energy conversion efficiency10.1002/pip.2244 ↗
8. Strain tuning via larger cation and anion codoping for efficient and stable antimony-based solar cells10.1002/advs.202002391 ↗
9. HTL-free Sb2(S, Se)3 solar cells with an optimal detailed balance band gap10.1021/acsami.1c10758 ↗
10. Efficient Sb2(S, Se)3 solar modules enabled by hydrothermal deposition10.1002/solr.202000750 ↗
11. Influence of post-selenization temperature on the performance of substrate-type Sb2Se3 solar cells10.1021/acsaem.1c00657 ↗
12. Sb2Se3 thin-film solar cells exceeding 10% power conversion efficiency enabled by injection vapor deposition technology10.1002/adma.202202969 ↗
13. Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries10.1038/nphoton.2015.78 ↗
14. Substrate structured Sb2S3 thin film solar cells fabricated by rapid thermal evaporation method10.1016/j.solener.2019.02.014 ↗
15. Efficient planar antimony sulfide thin film photovoltaics with large grain and preferential growth10.1016/j.solmat.2016.07.050 ↗
16. 9.2%-Efficient core-shell structured antimony selenide nanorod array solar cells
17. Solution-processed SnO2 interfacial layer for highly efficient Sb2Se3 thin film solar cells10.1016/j.nanoen.2019.04.019 ↗
18. Sb2(Se1-xSx)3 thin-film solar cells fabricated by single-source vapor transport deposition10.1002/solr.201800280 ↗
19. Improving the performance of Sb2S3 thin-film solar cells by optimization of VTD source-substrate proximity10.1016/j.solener.2021.03.052 ↗
20. Effects of working pressure on the material and defect properties of Sb2S3 thin-film solar cells achieved by the VTD method10.1364/AO.461238 ↗
21. Optimisation of Sb2S3 thin-film solar cells via Sb2Se3 post-treatment10.1016/j.jpowsour.2022.232451 ↗
22. All-vacuum-processed Sb2(S, Se)3 thin film photovoltaic devices via controllable tuning seed orientation10.1002/adfm.202370136 ↗
23. Efficient Se-rich Sb2Se3/CdS planar heterojunction solar cells by sequential processing: control and influence of Se content10.1002/solr.202070075 ↗
24. Vapor transport deposition of highly efficient Sb2(S, Se)3 solar cells via controllable orientation growth
25. Detailed balance limit of efficiency of p-n junction solar cells
26. Efficient double buffer layer Sb2(SexS1–x)3 thin film solar cell via single source evaporation10.1002/solr.201800144 ↗
27. Direct solution deposition of device quality Sb2S3-xSex films for high efficiency solar cells10.1016/j.solmat.2018.04.009 ↗
28. Over 6% certified Sb2(S, Se)3 solar cells fabricated via in situ hydrothermal growth and postselenization
29. Over 7% efficiency of Sb2(S, Se)3 solar cells via V-shaped bandgap engineering10.1002/solr.202000220 ↗
30. Controllable orientations for Sb2S3 solar cells by vertical VTD method10.1002/pip.3278 ↗
31. Vapor transport deposition of Sb2(S, Se)3 solar cells with continuously tunable band gaps10.1021/acsaem.2c00790 ↗
32. Fabricating over 7%-efficient Sb2(S, Se)3 thin-film solar cells by vapor transport deposition using Sb2Se3 and Sb2S3 mixed powders as the evaporation source10.1016/j.jpowsour.2021.229737 ↗
33. Hydrothermal deposition of antimony selenosulfide thin films enables solar cells with 10% efficiency10.1038/s41560-020-0652-3 ↗
34. Role of the substrates in the ribbon orientation of Sb2Se3 films grown by Low-Temperature Pulsed Electron Deposition10.1016/j.solmat.2020.110724 ↗
35. Characterization of basic physical properties of Sb2Se3 and its relevance for photovoltaics10.1007/s12200-017-0702-z ↗
36. Improved performance of thermally evaporated Sb2Se3 thin-film solar cells via substrate-cooling-speed control and hydrogen-sulfide treatment10.1021/acsami.0c03674 ↗
37. Nanorod-textured Sb2(S, Se)3 bilayer with enhanced light harvesting and accelerated charge extraction for high-efficiency Sb2(S, Se)3 solar cells10.1016/j.cej.2022.135341 ↗
38. Analysis of grain orientation and defects in Sb2Se3 solar cells fabricated by close-spaced sublimation10.1016/j.solener.2021.07.022 ↗
39. Tunable quasi-one-dimensional ribbon enhanced light absorption in Sb2Se3 thin-film solar cells grown by close-space sublimation10.1002/solr.201800128 ↗
40. Controlled synthesis of (hk1) preferentially oriented Sb2Se3 rod arrays by co-evaporation for photovoltaic applications10.1039/C9TA08289A ↗
41. A highly [001]-textured Sb2Se3 photocathode for efficient photoelectrochemical water reduction10.1039/C9NR08700A ↗
42. Quantum size effects in the redox potentials, resonance Raman spectra, and electronic spectra of CdS crystallites in aqueous solution10.1063/1.445834 ↗
43. Investigation of electronic transport mechanisms in Sb2Se3 thin-film solar cells10.1016/j.solmat.2019.04.003 ↗
44. Conduction in non-crystalline systems V. Conductivity, optical absorbance and photoconductivity in amorphous semiconductors10.1080/14786437008221061 ↗
45. Deep-level transient spectroscopy: a new method to characterize traps in semiconductors10.1063/1.1663719 ↗
46. A new lock-in amplifier-based deep-level transient spectroscopy test and measurement system for solar cells10.1016/j.solener.2022.08.062 ↗
47. Defect properties of Sb2Se3 thin film solar cells and bulk crystals10.1063/5.0012697 ↗
48. Interfacial engineering towards enhanced photovoltaic performance of Sb2Se3 solar cell10.1002/adfm.202208243 ↗
49. Revealing composition and structure dependent deep-level defect in antimony trisulfide photovoltaics10.1038/s41467-021-23592-0 ↗
50. Vapor transport deposition of antimony selenide thin film solar cells with 7.6% efficiency10.1038/s41467-018-04634-6 ↗