Photo-excited carrier transport and secondary phases of Na-engineered kesterite flexible thin films
Source abstract
Abstract
Kesterite [Cu2ZnSn(S,Se)4 (CZTSSe)], which is one of the most promising solar cell materials, can be used as a light absorber owing to its suitable optical and electrical properties. In this study, the optimization process of NaF layers was performed in the deposition of the precursor stacks of Sn/Cu/Zn/Mo to form CZTSSe thin films. The distribution of the secondary phases on the CZTSSe surfaces strongly depends on the insertion of the NaF layer. In particular, the Cu2-xS binary phase increases with the closeness of the insertion location of the NaF layer to the front side. Moreover, the grain boundary properties can be altered by varying the deposition conditions since Na segregation and defect formation affect the surface electrical properties and carrier transport mechanism. Photo-assisted conductive-atomic force microscopy was used to measure the local variation in the surface photocurrent flow into the CZTSSe grains, and the incorporation of sodium increased the surface current formation. This study exhibits the effects of Na on the optimal growth of kesterite formation and carrier transport of the relevant photovoltaic devices. © 2022 ; FALSE ; scie ; scopus
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Routes to copper zinc tin sulfide Cu2ZnSnS4 a potential material for solar cells10.1039/c2cc30792h ↗
2. Optical designs that improve the efficiency of Cu2ZnSn(S,Se)4 solar cells10.1039/C3EE42541J ↗
3. Elemental de-mixing-induced epitaxial kesterite/CdS interface enabling 13%-efficiency kesterite solar cells
4. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency, adv
5. A band-gap-graded CZTSSe solar cell with 12.3% efficiency,10.1039/C6TA01558A ↗
6. Defect control for 12.5% efficiency Cu2ZnSnSe4 kesterite thin-film solar cells by engineering of local chemical environment10.1002/adma.202005268 ↗
7. Additively manufactured nano-mechanical energy harvesting systems: advancements, potential applications, challenges and future perspectives10.1186/s40580-021-00289-0 ↗
8. Flexible Cu2ZnSn(S,Se)4 solar cells with over 10% efficiency and methods of enlarging the cell area10.1038/s41467-019-10890-x ↗
9. Sodium effects on the diffusion, phase, and defect characteristics of kesterite solar cells and flexible Cu2ZnSn(S,Se)4 with greater than 11% efficiency
10. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth-abundant solar cell absorbers10.1002/adma.201203146 ↗
11. Strategic review of secondary phases, defects and defect-complexes in kesterite CZTS–Se solar cells10.1039/C5EE02153G ↗
12. Phase equilibria in the Cu2S–ZnS–SnS2 system10.1016/j.jallcom.2003.08.084 ↗
13. Defect formation and phase stability of Cu2ZnSnS4 photovoltaic material10.1103/PhysRevB.81.113202 ↗
14. Direct evidence of current blocking by ZnSe in Cu2ZnSnSe4 solar cells10.1063/1.4706256 ↗
15. Investigation of combinatorial coevaporated thin film Cu2ZnSnS4 (II): beneficial cation arrangement in Cu-rich growth10.1063/1.4871665 ↗
16. Sodium passivation of the grain boundaries in CuInSe2 and Cu2ZnSnS4 for high-efficiency solar cells
17. Bifacial sodium-incorporated treatments: tailoring deep traps and enhancing carrier transport properties in Cu2ZnSnS4 solar cells10.1016/j.nanoen.2015.07.022 ↗
18. Influence of sodium incorporation on kesterite Cu2ZnSnS4 solar cells fabricated on stainless steel substrates10.1016/j.solmat.2016.07.036 ↗
19. Enhancement of photo-conversion efficiency in Cu2ZnSn(S,Se)4 thin-film solar cells by control of ZnS precursor-layer thickness, Prog. Photovolt
20. Controlling the anionic ratio and gradient in kesterite Technology10.1021/acsami.1c21507 ↗
21. Cu2ZnSn(S1-xSex)4 based solar cell produced by selenization of vacuum deposited precursors10.1016/j.solmat.2012.02.016 ↗
22. Kësterite thin films for photovoltaics : a review10.1051/epjpv/2012008 ↗
23. On the growth process of Cu2ZnSn(S,Se)4 absorber layer formed by selenizing Cu–ZnS–SnS precursors and its photovoltaic performance10.1016/j.solmat.2014.09.023 ↗
24. Preparation of Cu2ZnSnS4 thin films by sulfurization of stacked metallic layers10.1016/j.tsf.2008.09.058 ↗
25. Effect of metal layer stacking order on the growth of Cu2ZnSnS4 thin films10.1016/j.apsusc.2016.11.001 ↗
26. The alterations of carrier separation in kesterite solar cells,10.1016/j.nanoen.2018.07.039 ↗
27. Integrated enhanced Raman scattering: a review10.1186/s40580-021-00290-7 ↗
28. Effect of metal-precursor stacking order on volume-defect formation in CZTSSe thin film: formation mechanism of blisters and nanopores, ACS10.1021/acsami.2c01892 ↗
29. Rear band gap grading strategies on Sn−Ge-alloyed kesterite solar cells10.1021/acsaem.0c01146 ↗
30. Void and secondary phase formation mechanisms of CZTSSe using Sn/Cu/Zn/Mo stacked elemental precursors10.1016/j.nanoen.2019.02.063 ↗
31. Raman scattering quantitative analysis of the anion chemical composition in kesterite Cu2ZnSn(SxSe1-x)4 solid solutions10.1016/j.jallcom.2014.12.175 ↗
32. Optical and surface probe investigation of secondary phases in Cu2ZnSnS4 films grown by electrochemical deposition10.1016/j.solmat.2015.03.003 ↗
33. Raman scattering and disorder effect in Cu2ZnSnS410.1002/pssr.201307073 ↗
34. Is it possible to develop complex S−Se graded band gap profiles in kesterite-based solar cells?10.1021/acsami.9b09813 ↗
35. Influence of selenization atmosphere on the Cu2ZnSn(S,Se)4 thin films and its correlation to the performance of solar cells10.1016/j.materresbull.2017.05.053 ↗
36. Radiative recombination in Cu2ZnSnSe4 monograins studied by photoluminescence spectroscopy10.1016/j.tsf.2008.11.024 ↗
37. The band gap of Cu2ZnSnSe4: effect of order-disorder,10.1063/1.4896315 ↗
38. Optical phonon anisotropies in the layer crystals SnS2 and SnSe210.1103/PhysRevB.14.1663 ↗
39. Influence of compositional deviations on the properties of Cu2ZnSnSe4 monograin powders10.1016/j.egypro.2011.10.198 ↗
40. Synthesis and study of structure and phase composition in Cu2-xS, SnxSy, ZnS, CuxSnSy and CuZnSnS pellets10.1007/s10854-020-03045-y ↗
41. Growth and Raman scattering characterization of Cu2ZnSnS4 thin films10.1016/j.tsf.2008.11.031 ↗
42. Impact of Sn(S,Se) secondary phases in Cu2ZnSn(S,Se)4 solar cells: a chemical route for their selective removal and absorber surface passivation10.1021/am502609c ↗
43. Why are kesterite solar cells not 20% efficient?10.1016/j.tsf.2012.12.089 ↗
44. Fabrication of Cu2ZnSn(S,Se)4 thin films by sulfurization of precursor evaporated from Cu2ZnSnSe4 compound, phys
45. Growth and characterization of Cu2SnS3 (CTS), Cu2SnSe3 (CTSe), and Cu2Sn(S,Se)3 (CTSSe) thin films using dip-coated Cu–Sn precursor10.1007/s10854-019-01622-4 ↗
46. Effect of the stacked structure on performance in CZTSSe thin film solar cells10.1016/j.apsusc.2015.05.104 ↗
47. The role of sodium as a surfactant and suppressor of non-radiative recombination at internal surfaces in Cu2ZnSnS4, adv
48. Resonant Raman scattering of ZnSxSe1-x solid solutions: the role of S and Se electronic states10.1039/C5CP04498G ↗
49. Detection of a ZnSe secondary phase in coevaporated Cu2ZnSnSe4 thin films
50. Formation mechanism of secondary phases in Cu2ZnSnS4 growth under different copper content10.1016/j.matlet.2016.09.090 ↗
51. Flexible kesterite Cu2ZnSnS4 solar cells with sodium-doped molybdenum back contacts on stainless steel substrates10.1016/j.solmat.2018.02.036 ↗
52. Na incorporated improved properties of Cu2ZnSnS4 (CZTS) thin film by DC sputtering10.1016/j.vacuum.2018.05.007 ↗
53. Electronic effect of Na on Cu(In,Ga)Se2 solar cells10.1063/1.4733679 ↗
54. Infuence of sodium on the growth of polycrystalline Cu(In,Ga)Se2 thin films10.1016/S0040-6090(99)00777-4 ↗
55. Sodium assisted sintering of chalcogenides and its application to solution processed Cu2ZnSn(S,Se)4 thin film solar cells, chem
56. High photo-conversion efficiency Cu2Zn(S,Se)4 thin-film solar cells prepared by compound-precursors and metal-precursors10.1016/j.solmat.2018.03.050 ↗
57. Chemical tailoring of sodium content for optimization of interfacial band bending and alignment in flexible kesterite solar cells10.1016/j.solmat.2021.111243 ↗
58. Effect of sodium diffusion on the structural and electrical properties of Cu2ZnSnS4 thin films10.1016/j.solmat.2010.12.012 ↗