journal article·2021-08

Optical simulations to inform the design of UV-absorbing organic materials and solar cells

Quinn Burlingame, Yueh-Lin Loo

Publisher page

Abstract

Abstract Organic solar cells are ideal for semi-transparent applications given their “peaky” absorption, which allows them to selectively absorb photons outside the visible range while transmitting visible light. Such devices embody a fundamental tradeoff between transparency and power generation that must be optimized to fit the requirements of each potential application—for example, powering electrically dimmable smart windows. To inform the design of organic ultraviolet-absorbers and solar cells that target such applications, we computer-generate sets of optical constants with a range of absorption coefficients and absorption cutoff wavelengths that mimic those of real organic semiconductors. We then perform optical transfer-matrix simulations to determine the absorption and transmission spectra of full-stack photovoltaic cells, inserting these computer-generated optical constants to describe the photoactive absorbing layers. We find that solar cells having absorbers with a cutoff wavelength of 420 nm produce the most power without degrading transparency or color neutrality, and that absorption coefficients up to 5 × 105 cm−1 are needed to fully absorb the targeted wavelengths within practical photoactive layer thicknesses
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Net energy and cost benefit of transparent organic solar cells in building-integrated applications10.1016/j.apenergy.2019.114429 ↗
2. Transparent polymer photovoltaics for solar energy harvesting and beyond10.1016/j.joule.2018.04.005 ↗
3. Emergence of highly transparent photovoltaics for distributed applications10.1038/s41560-017-0016-9 ↗
4. Pairing of near-ultraviolet solar cells with electrochromic windows for smart management of the solar spectrum10.1038/s41560-017-0017-8 ↗
5. Neutral-colored transparent crystalline silicon photovoltaics10.1016/j.joule.2019.11.008 ↗
6. Color-neutral, semitransparent organic photovoltaics for power window applications
7. Lead halide ultraviolet-harvesting transparent photovoltaics with an efficiency exceeding 1%10.1021/acsaem.9b00270 ↗
8. Emissive and charge-generating donor–acceptor interfaces for organic optoelectronics with low voltage losses10.1038/s41563-019-0324-5 ↗
9. Nonfullerene acceptors for semitransparent organic solar cells10.1002/aenm.201800002 ↗
10. Theoretical limits for visibly transparent photovoltaics10.1063/1.4738896 ↗
11. High-throughput optical screening for efficient semitransparent organic solar cells10.1016/j.joule.2019.06.016 ↗
12. Thermodynamic efficiency limit of excitonic solar cells10.1103/PhysRevB.83.195326 ↗
13. Detailed balance limit of efficiency of p-n junction solar cells10.1063/1.1736034 ↗
14. Tabulated values of the Shockley-Queisser limit for single junction solar cells10.1016/j.solener.2016.02.015 ↗
15. Practical roadmap and limits to nanostructured photovoltaics10.1002/adma.201103404 ↗
16. Detailed balance and reciprocity in solar cells
17. Practical roadmap and limits to nanostructured photovoltaics10.1002/adma.201103404 ↗
18. Minimizing optical losses in bulk heterojunction polymer solar cells10.1007/s00340-006-2542-1 ↗
19. Small molecular weight organic thin-film photodetectors and solar cells10.1063/1.1534621 ↗
20. Effects of energy-level offset between a donor and acceptor on the photovoltaic performance of non-fullerene organic solar cells10.1039/C9TA04789A ↗
21. Optical gaps of organic solar cells as a reference for comparing voltage losses10.1002/aenm.201801352 ↗
22. Charge formation, recombination, and sweep-out dynamics in organic solar cells10.1002/adfm.201101632 ↗
23. Competition between recombination and extraction of free charges determines the fill factor of organic solar cells10.1038/ncomms8083 ↗
24. Modeling photocurrent action spectra of photovoltaic devices based on organic thin films10.1063/1.370757 ↗
25. High-performance ternary organic solar cells with thick active layer exceeding 11% efficiency10.1039/C6EE03599J ↗
26. Tandem organic photovoltaics using both solution and vacuum deposited small molecules10.1063/1.4742921 ↗
27. Tandem small molecule organic photovoltaic cells with broad spectral response up to 1 μm and a high open-circuit voltage10.1016/j.orgel.2014.08.047 ↗
28. A hybrid planar-mixed tetraphenyldibenzoperiflanthene/C70 photovoltaic cell10.1063/1.4793195 ↗
29. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
30. Developing design criteria for organic solar cells using well-absorbing non-fullerene acceptors10.1038/s42005-018-0026-3 ↗
31. Ellipsometric determination of the optical constants of C60 (Buckminsterfullerene) films10.1063/1.105907 ↗
32. Parameterization of the optical functions of amorphous materials in the interband region10.1063/1.118064 ↗
33. A Hybrid planar-mixed molecular heterojunction photovoltaic cell10.1002/adma.200400617 ↗
34. Contorted hexabenzocoronenes with extended heterocyclic moieties improve visible-light absorption and performance in organic solar cells10.1021/acs.chemmater.5b04503 ↗
35. Intrinsically stable organic solar cells under high-intensity illumination10.1038/s41586-019-1544-1 ↗
36. Transparent polymer photovoltaics for solar energy harvesting and beyond10.1016/j.joule.2018.04.005 ↗
37. High efficiency near-infrared and semitransparent non-fullerene acceptor organic photovoltaic cells10.1021/jacs.7b11278 ↗
38. Enhanced light utilization in semitransparent organic photovoltaics using an optical outcoupling architecture
39. High-efficiency nonfullerene organic solar cells enabled by 1000 nm thick active layers with a low trap-state density10.1021/acsami.0c05172 ↗