journal article·2024-08

Non-ionic polymeric polyacrylamide (PAM) modified SnO2 electron transport layer for high-efficiency perovskite solar cells

Lei Chen, Xueyuan Li, Na Zhang, Leiming Yu, Zhiyong Liu, Hairui Liu, Guilin Song

Publisher page

Abstract

SnO 2 electron transport layers (ETLs) had an essential role in the n-i-p structure of perovskite solar cells. Improving the quality of the electron transport layer and enhancing interfacial contacts were key factors in the fabrication of high-performance perovskite solar cells. Therefore, a non-ionic polymeric polyacrylamide (PAM) modified SnO 2 colloidal solution with improved clustering of SnO 2 nanoparticles was presented to form a uniform and dense SnO 2 electron transport layer. The results demonstrated that no pinhole pores were found at the interface where the PAM-modified electron transport layer and the light absorbing layer came into contact, a structure that facilitated carrier transport and reduced carrier recombination at the interface location. Further beneficial effects were revealed by femtosecond Fs-TA measurements and trap of states (tDOS) analysis, where the carrier lifetime τ 2 decreased from 306.7 ps to 137.8 ps and the trap density of states of the film also decreased significantly. Correspondingly, the SnO 2-PAM device exhibited an optimum efficiency of 21.61 %. Fantastic device stability was obtained due to the interaction of excellent contact at the SnO 2/FAPbI 3 interface, and 85 % of the initial efficiency was maintained when placed in air for 1000 h for photo-aging tests, thereby improving the stability of FAPbI 3 grains. This method of improving the quality of tin oxide colloidal solutions provided a novel and simple way to prepare efficient perovskite solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Perovskite solar cells with ZnO electron-transporting materials
2. Defect healing in FAPb(I1‐xBrx)3 perovskites: multifunctional fluorinated sulfonate surfactant anchoring enables >21% modules with improved operation stability
3. Graphdiyne: bridging SnO2 and perovskite in planar solar cells10.1002/anie.202003502 ↗
4. High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO210.1038/s41467-018-05760-x ↗
5. Red‐carbon‐quantum‐dot‐Doped SnO2 composite with enhanced electron mobility for efficient and stable perovskite solar cells
6. SnO2–TiO2 hybrid electron transport layer for efficient and flexible perovskite solar cells10.1021/acsenergylett.2c00637 ↗
7. Enhanced performance of planar perovskite solar cells using low-temperature solution-processed Al-doped SnO2 as electron transport layers10.1186/s11671-017-1992-1 ↗
8. Tailoring the energy band structure and interfacial morphology of the ETL via controllable nanocluster size achieves high-performance planar perovskite solar cells10.1021/acsami.1c11990 ↗
9. Multi-functional strategy: ammonium citrate-modified SnO2 ETL for efficient and stable perovskite solar cells10.1021/acsami.2c13309 ↗
10. Simultaneous chemical crosslinking of SnO2 and perovskite for high‐performance planar perovskite solar cells with minimized lead leakage10.1002/solr.202200567 ↗
11. Advances in SnO2-based perovskite solar cells: from preparation to photovoltaic applications10.1039/D1TA04130D ↗
12. Multifunctional polymer framework modified SnO2 enabling a photostable α-FAPbI3 perovskite solar cell with efficiency exceeding 2310.1021/acsenergylett.1c01763 ↗
13. Multifunctional polymer‐regulated SnO2 nanocrystals enhance interface contact for efficient and stable planar perovskite solar cells10.1002/adma.202003990 ↗
14. Planar‐structure perovskite solar cells with efficiency beyond 2110.1002/adma.201703852 ↗
15. Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes10.1038/s41586-021-03964-8 ↗
16. Thermal annealing-free SnO2 for fully room-temperature-processed perovskite solar cells10.1021/acsami.2c11488 ↗
17. Molecularly functionalized SnO2 films by carboxylic acids for high-performance perovskite solar cells10.1021/acsami.2c14494 ↗
18. Superfast room-temperature activation of SnO2 thin films via atmospheric plasma oxidation and their application in planar perovskite photovoltaics10.1002/adma.201704825 ↗
19. Colloidally prepared La-doped BaSnO3 electrodes for efficient, photostable perovskite solar cells10.1126/science.aam6620 ↗
20. Polymer-regulated SnO2 composites electron transport layer for high‐efficiency n–i–p perovskite solar cells10.1002/solr.202200092 ↗
21. Multifunctional polymer-regulated SnO2 nanocrystals enhance interface contact for efficient and stable planar perovskite solar cells10.1002/adma.202003990 ↗
22. Multifunctional polymer framework modified SnO2 enabling a photostable α-FAPbI3 perovskite solar cell with efficiency exceeding 2310.1021/acsenergylett.1c01763 ↗
23. Unraveling agglomeration and deagglomeration in aqueous colloidal dispersions of very small tin dioxide nanoparticles10.1016/j.jcis.2021.10.194 ↗
24. Molecular origins of the zeta potential10.1021/acs.langmuir.6b02493 ↗
25. Effect of dissolved organic matter on adsorption of sediments to Oxytetracycline: an insight from zeta potential and DLVO theory10.1007/s11356-019-06787-3 ↗
26. Experimental investigation of viscosity, enhanced thermal conductivity and zeta potential of a TiO2 electrolyte–based nanofluid10.1016/j.icheatmasstransfer.2020.104840 ↗
27. Achieving high-performance perovskite photovoltaic by morphology engineering of low-temperature processed Zn-doped TiO2 electron transport layer10.1002/smll.202002201 ↗
28. Perovskite-based solar cells: impact of morphology and device architecture on device performance10.1039/C4TA05226A ↗
29. Ethylamine iodide additive enables solid‐to‐solid transformed highly oriented perovskite for excellent photodetectors
30. Mitigating Voc loss in tin perovskite solar cells via simultaneous suppression of bulk and interface nonradiative recombination10.1021/acsami.2c12129 ↗
31. Charge carrier recombination at perovskite/hole transport layer interfaces monitored by time-resolved spectroscopy10.1021/acsenergylett.1c01931 ↗
32. High-performance perovskite solar cells based on passivating interfacial and intergranular defects10.1016/j.solmat.2020.110555 ↗
33. 2, 3, 4, 5, 6-Pentafluorophenylammonium bromide-based double-sided interface engineering for efficient planar heterojunction perovskite solar cells10.1016/j.cej.2022.139308 ↗
34. Heterostructural CsPbX3-PbS (X = Cl, Br, I) quantum dots with tunable vis–NIR dual emission10.1021/jacs.9b13681 ↗
35. Semi‐planar non‐fullerene molecules enhance the durability of flexible perovskite solar cells
36. Modulated crystallization and enhanced stable of high efficient perovskite solar cells with Pb(Ac)210.1016/j.jallcom.2023.168924 ↗
37. Femtosecond transient absorption spectra and dynamics of carrier relaxation of tin perovskites in the absence and presence of additives10.1021/acs.jpclett.0c01589 ↗
38. Improved perovskite crystallization via antisolvent-assisted processed using additive engineering for efficient perovskite solar cells10.1016/j.jallcom.2020.157396 ↗
39. Origin and elimination of photocurrent hysteresisby fullerene passivation in CH3NH3PbI3 planarheterojunction solar cells10.1038/ncomms6784 ↗
40. Alkali chlorides for the suppression of the interfacial recombination in inverted planar perovskite solar cells10.1002/aenm.201970068 ↗
41. Impedance spectroscopy of metal halide perovskite solar cells from the perspective of equivalent circuits10.1021/acs.chemrev.1c00214 ↗
42. Comprehensive understanding of heat-induced degradation of triple-cation mixed halide perovskite for a robust solar cell10.1016/j.nanoen.2018.10.011 ↗
43. Strategy for crystallization management of perovskite: incorporation of FAI in a PbI2 precursor for a two-step spin-coating process10.1021/acsaem.1c01568 ↗
44. Zwitterion-stabilizing scalable bladed α-phase Cs0.1FA0.9PbI3 films for efficient inverted planar perovskite solar cells10.1021/acssuschemeng.0c00417 ↗
45. Defect passivation using ultrathin PTAA layers for efficient and stable perovskite solar cells with a high fill factor and eliminated hysteresis10.1039/C9TA08314F ↗
46. High efficiency perovskite solar cells with tailorable surface wettability by surfactant10.1016/j.jpowsour.2019.227584 ↗