journal article·2023-04

Use finite element modelling to characterise the stress evolution in Multi Busbar interconnected half-cell tiled modules after soldering and lamination

Zhimeng Wang, Pei-Chieh Hsiao, Ning Song, Xiaowei Shen, Cheng Xu, Haimang Yi, Alison Lennon

Publisher page

Abstract

In this work, finite element modelling was used to investigate the stress evolution in solar photovoltaic modules after soldering and lamination. The impact of cell overlapping in modules and the selection of solders on maximum stress and stress distribution of Multi Busbar modules was investigated. Simulation results predict that the maximum 1st principal stress of up to ∼230 MPa in Si cells occurred at the edge of outer Ag pads. In addition, highly localised stress area occurred at the overlapped area when tiled which was verified by Raman spectroscopy. The application of SnBi solder can effectively reduce the maximum 1st principal stress in the tiled module from more than 220 MPa to ∼160 MPa, though its material properties tend to result in higher stress in the interconnection with a cell gap than SnPb solder.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Söderström · 2013 · 7002
2. Encapsulant-integrated interconnection of bifacial solar cells for BIPV applications: latest results in the twill-BIPV project
3. Layup-only modulization for low-stress fabrication of a silicon solar module with 100 μm thin silicon solar cells10.1016/j.solmat.2020.110903 ↗
4. Solar cell improvement by using a multi busbar design as front electrode
5. High efficiency multi-busbar solar cells and modules10.1109/JPHOTOV.2013.2286525 ↗
6. The multi-busbar design: an overview
7. T. Söderströma, P. Papetb, Y. Yao, J. Ufheil, Smartwire connection technology, n.d. http://www.hanplast.com/files/upload_files/white-paper-swct.pdf (accessed 9 11, 2018).
8. Triangular ribbons for improved module efficiencyular ribbons for improved module efficiency
9. Interconnect-shingling: maximizing the active module area with conventional module processes10.1016/j.solmat.2019.109991 ↗
10. Solder joint stability study of wire-based interconnection compared to ribbon interconnection10.1016/j.egypro.2017.09.288 ↗
11. Accelerated TC test in comparison with standard TC test for PV modules with ribbon, wire and shingle interconnection
12. Thermomechanical fatigue resistance of low temperature solder for multiwire interconnects in photovoltaic modules10.1016/j.solmat.2021.111054 ↗
13. Low-temperature soldering for the interconnection of silicon heterojunction solar cells
14. Design considerations for multi-terawatt scale manufacturing of existing and future photovoltaic technologies: challenges and opportunities related to silver, indium and bismuth consumption10.1039/D1EE01814K ↗
15. Root cause analysis of solar cell cracks at shingle joints10.1016/j.solmat.2022.111590 ↗
16. Crack initiation and growth in PV module interconnection10.1016/j.solener.2020.06.036 ↗
17. The fatigue life analysis of conductive adhesive
18. Field failure mechanism study of solder interconnection for crystalline silicon photovoltaic module10.1016/j.microrel.2012.06.027 ↗
19. Modelling and verification of mechanical stress induced by soldering of wires for multi busbar interconnection
20. Investigation of thermomechanical stress in solar cells with multi busbar interconnection by finite element modeling
21. Mechanical stress in solar cells with multi busbar interconnection—parameter study by FEM simulation
22. FEM simulation of deformations in strings of shingled solar cells subjected to mechanical reliability testing10.1063/1.5125881 ↗
23. The effect of cell and module dimensions on thermomechanical stress in PV modules10.1109/JPHOTOV.2019.2949875 ↗
24. Reliability analysis of field-aged glass/glass PV modules: influence of different encapsulant types
25. Thermal expansion reference data: silicon 300-850 K10.1088/0022-3727/14/10/003 ↗
26. Linear thermal expansion measurements on silicon from 6 to 340 K10.1063/1.323747 ↗
27. Electronic effects in the elastic constants of n-type silicon10.1103/PhysRev.161.756 ↗
28. Thermal stress and strain of solar cells in photovoltaic modules10.1007/978-3-642-21855-2_29 ↗
29. Equivalent static analysis method for barge impact-resistant bridge design10.1061/(ASCE)BE.1943-5592.0000224 ↗
30. Transformation of dynamic loads into equivalent static loads based on modal analysis10.1002/(SICI)1097-0207(19990910)46:1<29::AID-NME661>3.0.CO;2-D ↗
31. Technical overview of the equivalent static loads method for non-linear static response structural optimization10.1007/s00158-010-0530-x ↗
32. Database for solder properties with emphasis on new lead-free solders
33. C. Kohn, T. Faber, R. Kübler, J. Beinert, G. Kleer, F. Clement, D. Erath, I.E. Reis, F. Martin, A. Müller, Analyses of Warpage Effects Induced by Passivation and Electrode Coatings in Silicon Solar Cells, 22nd Eur. Photovolt. Sol. Energy Conf. Exhib. (2007) 1270. https://www.researchgate.net/publication/43607192 (accessed April 18, 2022).
34. Balanced contact method: reduction of thermomechanical stress in silicon solar cells induced by interconnection10.1016/j.solmat.2020.110667 ↗
35. Beinert · 2018 · 3613
36. From micro– to macro–Raman spectroscopy: solar silicon for a case study10.5772/48143 ↗
37. Enabling the measurement of thermomechanical stress in solar cells and PV modules by confocal micro-Raman spectroscopy10.1016/j.solmat.2019.01.028 ↗