journal article·2019-09

Improved performance of inverted perovskite solar cells due to the incorporation of zirconium acetylacetonate buffer layer

Aditya S. Yerramilli, Yuanqing Chen, Andrew Knight, Banashree Gogoi, Lingwei Li, Yang Song, Yuxia Shen, T.L. Alford

Publisher page

Abstract

Abstract We demonstrated the use of an additional cathode layer of zirconium acetylacetonate (ZAC) prepared in IPA for Perovskite solar cells (PSC) and achieved a power conversion efficiency of 15.2%, which is about 25% higher when compared to a control device with only PCBM. Our results indicated that IPA was the best alcohol-based solvent to obtain a smooth film and also prevented any corrosion of the underlying layers. We investigated the surface effects of adding the layer and also realized an optimized concentration of 1.5 mg/ml was best for device efficiency as well as reduced the RMS to 3 nm. Dark-current time-resolved photoluminescence measurements were used to understand the effect of the thickness and concentration of the ZAC layer on the performance of the device.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Conjugated polymer photovoltaic cells10.1021/cm049654n ↗
2. Organohalide lead perovskites for photovoltaic applications10.1039/C4EE00942H ↗
3. Perovskite solar cells: from materials to devices10.1002/smll.201402767 ↗
4. Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency10.1039/C5EE03874J ↗
5. Efficient and stable solution-processed planar perovskite solar cells via contact passivation10.1126/science.aai9081 ↗
6. Recent advances in polymer solar cells: realization of high device performance by incorporating water/alcohol-soluble conjugated polymers as electrode buffer layer10.1002/adma.201303391 ↗
7. Solution-processable metal oxides/chelates as electrode buffer layers for efficient and stable polymer solar cells10.1039/C4EE03802A ↗
8. Solution-processed zinc oxide thin film as a buffer layer for polymer solar cells with an inverted device structure
9. New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer10.1002/adma.200501825 ↗
10. Interfacial characteristics of efficient bulk heterojunction solar cells fabricated on MoOx anode interlayers
11. Solution-processed nickel oxide hole transport layers in high efficiency polymer photovoltaic cells10.1002/adfm.201202269 ↗
12. Amorphous inorganic electron-selective layers for efficient perovskite solar cells: feasible strategy towards room-temperature fabrication
13. High performance polymer solar cells with as-prepared zirconium acetylacetonate film as cathode buffer layer
14. High-performance inverted polymer solar cells with zirconium acetylacetonate buffer layers10.1021/acsami.6b11636 ↗
15. Planar heterojunction organometal halide perovskite solar cells: roles of interfacial layers10.1039/C5EE02194D ↗
16. Utilising solution processed zirconium acetylacetonate as an electron extracting layer in both regular and inverted small molecule organic photovoltaic cells
17. Efficacious engineering on charge extraction for realizing high-efficient perovskite solar cells10.1039/C7EE02685D ↗
18. Improved fill factor in inverted planar perovskite solar cells with zirconium acetate as the hole-and-ion-blocking layer10.1039/C8CP00563J ↗
19. Highly efficient inverted polymer solar cells based on a cross-linkable water-/alcohol-soluble conjugated polymer interlayer10.1021/am501920z ↗
20. Effect of excessive Pb content in the precursor solutions on the properties of the lead acetate derived CH3NH3PbI3perovskite solar cells10.1016/j.solmat.2017.09.039 ↗
21. Control of the nucleation and growth of the lead acetate solution derived CH 3 NH 3 PbI 3 films leads to enhanced power conversion efficiency
22. Halide perovskite solar cells using monocrystalline TiO 2 nanorod arrays as electron transport layers: impact of nanorod morphology10.1088/1361-6528/aa75ab ↗
23. A generic interface to reduce the efficiency-stability-cost gap of perovskite solar cells10.1126/science.aao5561 ↗
24. Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes10.1126/science.aad1818 ↗