journal article·2019-02

Introduction of nitrogen gas flow and precursor aging process to improve the efficiency of the lead acetate derived CH3NH3PbI3 perovskite solar cells

Yuanqing Chen, Lingwei Li, Aditya S. Yerramilli, Wenwen Qu, Yang Song, Na Li, Yuxia Shen, T.L. Alford

Publisher page

Abstract

Abstract In this study of the fabricated perovskite solar cells, flowing nitrogen is introduced during the spin coating of the precursor to remove the solvent vapor. The precursor is then aged prior to the anneal to obtain a pinhole-free perovskite film. Both the nitrogen flow and precursor aging methods resulted in improved film quality. The phase composition and orientation of the CH3NH3PbI3 phase was tuned through control of the aging time. This lead to high-performance CH3NH3PbI3 planar perovskite solar cells with power conversion efficiency over 16%. The intermediate phase composition was sensitive to the ambient atmosphere. The content of the PbI2 in the final CH3NH3PbI3 films varied with precursor aging time. The combination of nitrogen flow and suitable aging time resulted in films with enhanced (110)-orientation, compactness, charge carrier lifetimes, and correspondingly power conversion efficiencies.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Solid-state spectroscopy and crystallography

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Mechanical stability of roll-to-roll printed solar cells under cyclic bending and torsion10.1016/j.solmat.2017.08.015 ↗
2. In situ X-ray scattering of perovskite solar cell active layers roll-to-roll coated on flexible substrates10.1039/C6CE00382F ↗
3. A vacuum flash-assisted solution process for high-efficiency large-area perovskite solar cells10.1126/science.aaf8060 ↗
4. Efficiency-enhanced planar perovskite solar cells via an isopropanol/ethanol mixed solvent process10.1021/acsami.6b08863 ↗
5. Influence of thermal processing protocol upon the crystallization and photovoltaic performance of organic-inorganic lead trihalide perovskites10.1021/jp500717w ↗
6. Ultrasmooth organic-inorganic perovskite thin-film formation and crystallization for efficient planar heterojunction solar cells
7. Enhanced optoelectronic quality of perovskite thin films with hypophosphorous acid for planar heterojunction solar cells10.1038/ncomms10030 ↗
8. High-performance inverted planar heterojunction perovskite solar cells based on lead acetate precursor with efficiency exceeding 18%10.1002/adfm.201601175 ↗
9. Simple fabrication of perovskite solar cells using lead acetate as lead source at low temperature
10. Solvent annealing of perovskite-induced crystal growth for photovoltaic-device efficiency enhancement10.1002/adma.201401685 ↗
11. Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells10.1038/nmat4014 ↗
12. Thermally stable MAPbI3 perovskite solar cells with efficiency of 19.19% and area over 1 cm2 achieved by additive engineering10.1002/adma.201701073 ↗
13. Crystallization process of perovskite modified by adding lead acetate in precursor solution for better morphology and higher device efficiency
14. Moisture-driven phase transition for improved perovskite solar cells with reduced trap-state density10.1007/s12274-017-1515-5 ↗
15. A universal deposition protocol for planar heterojunction solar cells with high efficiency based on hybrid lead halide perovskite families10.1002/adma.201603747 ↗
16. Air-assisted flow and two-step spin-coating for highly efficient CH3NH3PbI3 perovskite solar cells10.7567/JJAP.55.02BF08 ↗
17. Effect of excessive Pb content in the precursor solutions on the properties of the lead acetate derived CH3NH3PbI3perovskite solar cells10.1016/j.solmat.2017.09.039 ↗
18. Tailoring nucleation and grain growth by changing the precursor phase ratio for efficient organic lead halide perovskite optoelectronic devices10.1039/C7TC02928D ↗
19. Efficient planar structured perovskite solar cells with enhanced open-circuit voltage and suppressed charge recombination based on a slow grown perovskite layer from lead acetate precursor10.1021/acsami.7b15229 ↗
20. In situ dynamic observations of perovskite crystallisation and microstructure evolution intermediated from [PbI6]4-cage nanoparticles10.1038/ncomms15688 ↗
21. High efficiency methylammonium lead triiodide perovskite solar cells: the relevance of non-stoichiometric precursors10.1039/C5EE02555A ↗
22. Optimization of PbI2/MAPbI3 perovskite composites by scanning electrochemical microscopy10.1021/acs.jpcc.6b07850 ↗
23. Intermixing-seeded growth for high-performance planar heterojunction perovskite solar cells assisted by precursor-capped nanoparticles10.1039/C5EE03229F ↗
24. Tailoring nucleation and grain growth by changing the precursor phase ratio for efficient organic lead halide perovskite optoelectronic devices10.1039/C7TC02928D ↗
25. Controllable self-induced passivation of hybrid lead iodide perovskites toward high performance solar cells controllable self-induced passivation of hybrid lead iodide perovskites toward high performance solar cells10.1021/nl501838y ↗
26. Synthesis of perfectly oriented and micrometer-sized MAPbBr3 perovskite crystals for thin-film photovoltaic applications10.1021/acsenergylett.6b00050 ↗