journal article·2014-10

Increased performance of inverted organic photovoltaic cells using a cationically functionalized fullerene interfacial layer

Christopher D. Weber, Colin Bradley, Ethan M. Walker, Stephen G. Robinson, Mark C. Lonergan

Publisher page

Abstract

Abstract The incorporation of a cationically functionalized fullerene interfacial layer (NMFP-Br) into an inverted poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester (P3HT:PCBM) bulk heterojunction photovoltaic cell results in a significant power conversion efficiency (PCE) improvement of 67%, from 2.1% to 3.5%, relative to cells without an interfacial layer. The incorporation of NMFP-Br as an ITO modifying interfacial layer results in a 190 mV increase in the open-circuit voltage, 13% increase in fill factor, and 250% reduction in series resistance. Cell efficiencies are greater than or comparable to other reported cells based on organic electron injection layers with the same active layer and electrode configuration. The orthogonal solubility afforded by ionic functionality allows for sequential solution phase deposition without the necessity of chemical cross-linking of the fullerene based interfacial layer. Inverted devices incorporating a single phase, ionically functionalized fullerene interfacial layer have not been previously demonstrated. The unusually high conductivity of NMFP-Br films is investigated and shown to be ~3 orders of magnitude higher than PCBM and contributes to the substantial reduction in series resistance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Fullerene Chemistry and Applications · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Enhanced power-conversion efficiency in polymer solar cells using an inverted geometry10.1038/nphoton.2012.190 ↗
2. Recent advances in solution-processed interfacial layers for efficient and stable polymer solar cells
3. Recent development of the inverted configuration organic solar cells10.1016/j.solmat.2011.02.002 ↗
4. The role of buffer layers in polymer solar cells,10.1039/C0EE00273A ↗
5. Investigating the influence of interfacial contact properties on open circuit voltages in organic photovoltaic performance: work function versus selectivity10.1002/aenm.201200669 ↗
6. Brabec · 2003
7. Highly efficient inverted organic photovoltaics using solution based titanium oxide as electron selective contact10.1063/1.2402890 ↗
8. An inverted organic solar cell employing a sol–gel derived ZnO electron selective layer and thermal evaporated MoO3 hole selective layer10.1063/1.3039076 ↗
9. Tuning of a graphene-electrode work function to enhance the efficiency of organic bulk heterojunction photovoltaic cells with an inverted structure10.1063/1.3514551 ↗
10. Interface engineering to enhance the efficiency of conventional polymer solar cells by alcohol–water soluble C60 materials doped with alkali carbonates10.1021/am400962e ↗
11. Highly efficient inverted polymer solar cells based on an alcohol soluble fullerene derivative interfacial modification material10.1021/cm300824h ↗
12. Interfacial modification to improve inverted polymer solar cells10.1039/b808004f ↗
13. High performance ambient processed inverted polymer solar cells through interfacial modification with a fullerene self-assembled monolayer10.1063/1.3028094 ↗
14. Inverted polymer solar cells with 8.4% efficiency by conjugated polyelectrolyte10.1039/c2ee22296e ↗
15. Enhanced performance of inverted polymer solar cells with cathode interfacial tuning via-water soluble polyfluorenes10.1063/1.3522893 ↗
16. Improved injection in n-type organic transistors with conjugated polyelectrolytes10.1021/ja908441c ↗
17. Ultrathin interlayers of a conjugated polyelectrolyte for low work-function cathodes in efficient inverted organic solar cells10.1016/j.orgel.2013.01.018 ↗
18. Effective interfacial layer to enhance efficiency of polymer solar cells via solution processed fullerene surfactants10.1039/c2jm30755c ↗
19. Highly efficient and stable inverted polymer solar cells integrated with a cross-linked fullerene material as an interlayer10.1021/ja100236b ↗
20. n-Doping of thermally polymerizable fullerenes as an electron transporting layer for inverted polymer solar cells10.1039/c1jm10214a ↗
21. Optimized inverted polymer solar cells incorporating Cs2CO3-doped C60 as electron transport layer10.1063/1.4807388 ↗
22. Schroder · 2006 · 209
23. Open-circuit voltage in organic solar cells10.1039/c2jm33719c ↗
24. Origin of the enhanced open-circuit voltage in polymer solar cells via interfacial modification using conjugated polyelectrolytes10.1039/b921775d ↗
25. The effect of oxygen and illumination of the in-situ conductivity of C60 thin films10.1103/PhysRevB.47.10873 ↗
26. Solution-processible highly conductive fullerenes10.1002/adma.201204543 ↗
27. A self-doping, O2 stable, n-type interfacial layer for organic electronics10.1002/aenm.201100446 ↗
28. Cationic conjugated polyelectrolyte electron injection layers: effect of halide counterions10.1021/jp806374s ↗
29. Near-IR absorption spectra for the buckminsterfullerene anions: an experimental and theoretical study10.1149/1.2221179 ↗
30. Overcoming the “light-soaking” issue in inverted organic solar cells by the use of Al:ZnO electron extraction layers10.1002/aenm.201300402 ↗
31. Effects of cathode modification using spin-coated lithium acetate on the performances of polymer bulk-heterojunction solar cells10.1063/1.4773570 ↗
32. Solution phase n-doping of C60 and PCBM using tetrabutylammonium fluoride10.1039/C3TA14132B ↗
33. Excited state properties of C60 fullerene derivatives10.1021/ar990144m ↗