journal article·2022-05

A multifunctional flame retardant enabling efficient and stable formamidine-cesium perovskite solar cells

Zhengyan He, Yanqiang Hu, Zhaolei Yu, Xiangrui Jia, Shufang Zhang, Qian Tao, Wenkai Zhao, Yunyi Wu, Qinfeng Xu, Mengmeng Jiao, Dehua Wang, Chuanlu Yang

Publisher page

Abstract

The defects concentrated at grain boundaries and on film surfaces acts as trap states of charge carriers and trigger points of degradation of perovskite, greatly hampering the efficiency and stability of perovskite solar cells (PSCs). It is highly desirable to fabricate high-quality perovskite polycrystalline films with low grain boundary density and defect density. Herein, a flame retardant phosphaphenanthrene is introduced into the precursor to simultaneously modulate perovskite crystallization and passivate defects of perovskite films. The crystallinity and stability of perovskite films are greatly enhanced owing to strong coordination between the phosphaphenanthrene and Pb 2+ and intermolecular interactions. The efficiency of FA 0.85Cs 0.15PbI 3 (FA, formamidine and Cs, cesium) PSC with the active area of 0.255 cm 2 is significantly increased from 17.95% to 21.13%, along with negligible hysteresis. This facile strategy of employing multifunctional molecules has shown great promise for pursuing efficient and stable FACs-based PSCs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Solid-state spectroscopy and crystallography · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Precisely controlling the grain sizes with an ammonium hypophosphite additive for high-performance perovskite solar cells10.1002/adfm.201802320 ↗
2. Two-dimensional Ruddlesden–Popper layered perovskite solar cells based on phase-pure thin films10.1038/s41560-020-00721-5 ↗
3. A Eu3+-Eu2+ ion redox shuttle imparts operational durability to Pb-I perovskite solar cells10.1126/science.aau5701 ↗
4. Efficient and stable low-bandgap perovskite solar cells enabled by a CsPbBr3-cluster assisted bottom-up crystallization approach10.1021/jacs.9b11546 ↗
5. Crown ether-assisted growth and scaling up of FACsPbI3 films for efficient and stable perovskite solar modules10.1002/adfm.202008760 ↗
6. Formamidinium and cesium hybridization for photo- and moisture-stable perovskite solar cell10.1002/aenm.201501310 ↗
7. Methylammonium-free, high-performance, and stable perovskite solar cells on a planar architecture10.1126/science.aat3583 ↗
8. Tuning molecular interactions for highly reproducible and efficient formamidinium perovskite solar cells via adduct approach10.1021/jacs.8b01037 ↗
9. Crystal growth engineering for high efficiency perovskite solar cells10.1039/C6CE00813E ↗
10. Understanding of perovskite crystal growth and film formation in scalable deposition processes10.1039/C9CS00711C ↗
11. Evaluation of Cu back contact related deep defects in CdTe solar cells10.1149/2.001206jss ↗
12. Impact of copper back contact in CdTe solar cells: study of defects by temperature-dependent capacitance–voltage measurements
13. Dual functions of crystallization control and defect passivation enabled by sulfonic zwitterions for stable and efficient perovskite solar cells10.1002/adma.201803428 ↗
14. Surface passivation of perovskite film for efficient solar cells10.1038/s41566-019-0398-2 ↗
15. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
16. Defect and contact passivation for perovskite solar cells10.1002/adma.201900428 ↗
17. Intermolecular π–π conjugation self-assembly to stabilize surface passivation of highly efficient perovskite solar cells10.1002/adma.201907396 ↗
18. Enhanced optoelectronic quality of perovskite thin films with hypophosphorous acid for planar heterojunction solar cells10.1038/ncomms10030 ↗
19. 17% efficient perovskite solar mini-module via hexamethylphosphoramide (HMPA)-adduct-based large-area D-bar coating10.1039/D0TA02017F ↗
20. Coating evaporated MAPI thin films with organic molecules: improved stability at high temperature and implementation in high-efficiency solar cells10.1021/acsenergylett.8b00193 ↗
21. Room temperature synthesis of phosphine-capped lead bromide perovskite nanocrystals without coordinating solvents10.1002/ppsc.201900391 ↗
22. Synthesis and dimensional control of CsPbBr3 perovskite nanocrystals using phosphorous based ligands10.1063/1.5128233 ↗
23. Multifunctional phosphorus-containing lewis acid and base passivation enabling efficient and moisture-stable perovskite solar cells10.1002/adfm.201910710 ↗
24. Effect of bidentate and tridentate additives on the photovoltaic performance and stability of perovskite solar cells10.1039/C8TA11977E ↗
25. Cation and anion immobilization through chemical bonding enhancement with fluorides for stable halide perovskite solar cells10.1038/s41560-019-0382-6 ↗
26. CsI pre-intercalation in the inorganic framework for efficient and stable FA1−xCsxPbI3(Cl) perovskite solar cells10.1002/smll.201700484 ↗
27. Z. Yang, W. Zhang, S. Wu, H. Zhu, Z. Liu, Z. Liu, Z. Jiang, R. Chen, J. Zhou, Q. Lu, Z. Xiao, L. Shi, H. Chen, K. Ono Luis, S. Zhang, Y. Zhang, Y. Qi, L. Han, W. Chen, Slot-die coating large-area formamidinium-cesium perovskite film for efficient and stable parallel solar module, Sci. Adv. 7 eabg3749, https://doi.org/10.1126/sciadv.abg3749.10.1126/sciadv.abg3749 ↗
28. Highly efficient and stable perovskite solar cells based on monolithically grained CH3NH3PbI3 film10.1002/aenm.201602017 ↗
29. Controlled growth of textured perovskite films towards high performance solar cells10.1016/j.nanoen.2016.06.041 ↗
30. Air-stable, hole-conductor-free high photocurrent perovskite solar cells with CH3NH3PbI3–NiO nanoparticles composite10.1016/j.nanoen.2016.08.006 ↗
31. A coadditive strategy for blocking ionic mobility in methylammonium-free perovskite solar cells and high-stability achievement10.1002/solr.202100010 ↗
32. Band-bending induced passivation: high performance and stable perovskite solar cells using a perhydropoly(silazane) precursor10.1039/C9EE02028D ↗
33. Controllable self-induced passivation of hybrid lead iodide perovskites toward high performance solar cells10.1021/nl501838y ↗
34. CsPbBr3 perovskite nanoparticles as additive for environmentally stable perovskite solar cells with 20.46% efficiency10.1016/j.nanoen.2019.02.070 ↗
35. Characterization of space charge layer deep defects in n+-CdS/p-CdTe solar cells by temperature dependent capacitance spectroscopy10.1063/1.4800830 ↗
36. Precursor engineering for a large-area perovskite solar cell with >19% efficiency10.1021/acsenergylett.9b01735 ↗
37. Controllable grain morphology of perovskite absorber film by molecular self-assembly toward efficient solar cell exceeding 1710.1021/jacs.5b06444 ↗
38. Groups-dependent phosphines as the organic redox for point defects elimination in hybrid perovskite solar cells10.1016/j.jechem.2020.05.047 ↗
39. Moisture-triggered self-healing flexible perovskite photodetectors with excellent mechanical stability10.1002/adma.202100625 ↗
40. Highly stable and efficient FASnI3-based perovskite solar cells by introducing hydrogen bonding10.1002/adma.201903721 ↗
41. Polymer doping for high-efficiency perovskite solar cells with improved moisture stability10.1002/aenm.201701757 ↗
42. Efficient defect-passivation and charge-transfer with interfacial organophosphorus ligand modification for enhanced performance of perovskite solar cells10.1016/j.solmat.2020.110527 ↗
43. Enhanced efficiency and stability of planar perovskite solar cells by introducing amino acid to SnO2/perovskite interface10.1016/j.jpowsour.2020.227974 ↗
44. Interface engineering in planar perovskite solar cells: energy level alignment, perovskite morphology control and high performance achievement10.1039/C6TA08783C ↗
45. Minimizing non-radiative recombination losses in perovskite solar cells10.1038/s41578-019-0151-y ↗
46. Influence of fermi level alignment with tin oxide on the hysteresis of perovskite solar cells10.1021/acsami.8b00990 ↗
47. Surface modification of conventional polymers by depositing plasma polymers of trimethylsilane and of trimethylsilane + O2: I. static wetting properties10.1006/jcis.1998.5963 ↗
48. Cs0.15FA0.85PbI3/CsxFA1-xPbI3 core/shell heterostructure for highly stable and efficient perovskite solar cells10.1016/j.xcrp.2020.100224 ↗
49. Microscopic degradation in formamidinium-cesium lead iodide perovskite solar cells under operational stressors10.1016/j.joule.2020.06.005 ↗
50. Quantum-dot-Induced cesium-rich surface imparts enhanced stability to formamidinium lead iodide perovskite solar cells10.1021/acsenergylett.9b01262 ↗
51. Improved efficiency of methylammonium-free perovskite thin film solar cells by fluorinated ammonium iodide treatment10.1016/j.orgel.2019.105596 ↗
52. Vapor-Assisted ex-situ doping of carbon nanotube toward efficient and stable perovskite solar cells10.1021/acs.nanolett.8b04190 ↗
53. Air-processed mixed-cation Cs0.15FA0.85PbI3 planar perovskite solar cells derived from a PbI2–CsI–FAI intermediate complex10.1039/C8TA01049H ↗
54. Formamidine-assisted fast crystallization to fabricate formamidinium-based perovskite films for high-efficiency and stable solar cells10.1039/C9TC05465K ↗
55. Extremely robust gas-quenching deposition of halide perovskites on top of hydrophobic hole transport materials for inverted (p–i–n) solar cells by targeting the precursor wetting issue10.1021/acsami.9b15867 ↗
56. Stable and reproducible 2D/3D formamidinium–lead–iodide perovskite solar cells10.1021/acsaem.8b01964 ↗
57. Improved efficiency and photo-stability of methylamine-free perovskite solar cells via cadmium doping10.1088/1674-4926/40/12/122201 ↗