A study about lifetime of photovoltaic fibers
Source abstract
Abstract
Abstract In this study, the stability of polymer-based photovoltaic fibers was investigated in ambient and inert atmosphere. Photovoltaic (PV) fibers, similarly produced by using both polymer blend of wide and low bandgap polymers (P3HT: PTB7: PCDTBT) and only wide bandgap (P3HT) polymer with [6,6]-phenyl C61 butyric acid methyl ester (PCBM) in active layer were measured in ambient and in inert environment after dark storage, and then, their photovoltaic performances and stabilities were compared. Maximum power conversion efficiency of 2.01% was obtained from photovoltaic fiber with P3HT: PTB7: PCDTBT polymer blend. When stability results were considered, at end of 7th day, photovoltaic fibers having P3HT: PTB7: PCDTBT:PCBM active layer showed better performance than P3HT: PCBM-based PV fibers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Effects of energy policies on industry expansion in renewable energy10.1016/j.renene.2008.03.018 ↗
2. Global warming and renewable energy sources for sustainable development in Turkey10.1016/j.renene.2007.05.040 ↗
3. Transparent polymer cathode for organic photovoltaic devices10.1016/j.synthmet.2006.07.006 ↗
4. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
5. Large-scale pattern growth of graphene films for stretchable transparent electrodes10.1038/nature07719 ↗
6. Bending fatigue study of sputtered ITO on flexible substrate10.1109/JDT.2011.2151830 ↗
7. Optical design of transparent thin metal electrodes to enhance in-coupling and trapping of light in flexible polymer solar cells10.1002/adma.201203099 ↗
8. A mechanical assessment of flexible optoelectronic devices10.1016/S0040-6090(01)01138-5 ↗
9. Carbon nanotube network electrodes enabling efficient organic solar cells without a hole transport layer10.1063/1.3453445 ↗
10. Photovoltaic textile structure using polyaniline/carbon nanotube composite materials10.1080/00405000.2010.525816 ↗
11. Conducting and transparent single-wall carbon nanotube electrodes for polymer-fullerene solar cells10.1063/1.2132065 ↗
12. Fullerene derivative-doped zinc oxide nanofilm as the cathode of inverted polymer solar cells with low-bandgap polymer (PTB7-Th) for high performance10.1002/adma.201301476 ↗
13. An investigation into polymer-based photovoltaic fiber structures
14. Fabrication of photovoltaic textiles10.3390/coatings7050063 ↗
15. Solution-processed transparent conducting electrodes with graphene, silver nanowires and PEDOT: pss as alternative to ITO10.1016/j.surfcoat.2016.05.058 ↗
16. A photovoltaic fiber design for smart textiles10.1177/0040517509352520 ↗
17. Manufacturing and morphology of poly(epsilon-caprolactone) based microfibre webs for biomedical applications through airbrush technique
18. The effect of MWCNT-PEDOT:PSS layer in organic photovoltaic fiber device
19. Smart electronic textiles10.1002/anie.201507333 ↗
20. Mukesh Kumar · 2011
21. Integrated fibres for self-monitored optical transport10.1038/nmat1512 ↗
22. Towards woven logic from organic electronic fibres10.1038/nmat1884 ↗
23. Metal-insulator-semiconductor optoelectronic fibres10.1038/nature02937 ↗
24. Fiber-based flexible thermoelectric power generator10.1016/j.jpowsour.2007.09.096 ↗
25. Fundamentals of bulk heterojunction organic solar cells: an overview of stability/degradation issues and strategies for improvement10.1016/j.rser.2017.12.008 ↗
26. Baselines for lifetime of organic solar cells10.1002/aenm.201600910 ↗
27. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
28. Flexible organic P3HT: pcbm bulk-heterojunction modules with more than 1 year outdoor lifetime10.1016/j.solmat.2008.01.004 ↗
29. Oxidative chemical vapor deposition of neutral hole transporting polymer for enhanced solar cell efficiency and lifetime10.1002/adma.201601221 ↗
30. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
31. Flexible, long-lived, large-area, organic solar cells10.1016/j.solmat.2006.10.013 ↗
32. Influence of Alq3/Au cathode on stability and efficiency of a layered organic solar cell in air10.1016/j.solmat.2008.06.002 ↗
33. Stability and reliability of P3HT: PC61BM inverted organic solar cells10.1016/j.solmat.2016.12.020 ↗
34. Stability comparison: a PCDTBT/PC71BM bulk-heterojunction versus a P3HT/PC71BM bulk-heterojunction10.1016/j.solmat.2012.02.005 ↗
35. A new encapsulation solution for flexible organic solar cells10.1016/j.tsf.2005.12.091 ↗
36. N.G. Dhere, S. Cros, S. Guillerez, R. de Bettignies, N. Lemaître, S. Bailly, P. Maisse, Relationship between encapsulation barrier performance and organic solar cell lifetime, in: Reliability of PhotovoltaicCells, Modules, Components, and Systems, 2008.
37. High efficiency polymer solar cells with long operating lifetimes10.1002/aenm.201100138 ↗
38. A correlation study between barrier film performance and shelf lifetime of encapsulated organic solar cells10.1016/j.solmat.2012.02.002 ↗
39. Ultra-thin alumina layer encapsulation of bulk heterojunction organic photovoltaics for enhanced device lifetime10.1016/j.orgel.2013.10.014 ↗
40. Predicting, categorizing and intercomparing the lifetime of OPVs for different ageing tests10.1016/j.solmat.2014.06.031 ↗
41. Lifetime of organic photovoltaics: linking outdoor and indoor tests10.1016/j.solmat.2015.07.037 ↗
42. A cost-effective, long-lifetime efficient organic luminescent solar concentrator10.1063/1.4923389 ↗
43. Photovoltaic analysis of the effects of PEDOT: pss-additives hole selective contacts on the efficiency and lifetime performance of inverted organic solar cells10.1016/j.solmat.2014.10.004 ↗
44. Encapsulation for improving the lifetime of flexible perovskite solar cells10.1016/j.nanoen.2015.10.006 ↗
45. Inside or outside? Linking outdoor and indoor lifetime tests of ITO-free organic photovoltaic devices for greenhouse applications10.1002/ente.201600335 ↗
46. Improving, characterizing and predicting the lifetime of organic photovoltaics10.1088/1361-6463/50/10/103001 ↗
47. Current status of outdoor lifetime testing of organic photovoltaics
48. A setup for studying stability and degradation of polymer solar cells10.1016/j.solmat.2008.02.008 ↗
49. Degradation mechanism of organic solar cells with aluminum cathode10.1016/j.solmat.2011.07.020 ↗
50. Degradation mechanisms in organic photovoltaic devices10.1016/j.orgel.2011.11.027 ↗
51. Degradation and stability of polymer-based solar cells10.1039/c2jm33645f ↗
52. Grain size dependence of degradation of aluminium/calcium cathodes in organic solar cells following exposure to humid air10.1016/j.solmat.2015.03.015 ↗
53. Minimal long-term intrinsic degradation observed in a polymer solar cell illuminated in an oxygen-free environment10.1021/cm504650a ↗
54. Degradation of transparent conductive oxides: interfacial engineering and mechanistic insights10.1016/j.solmat.2015.07.030 ↗
55. Electric-field-induced degradation of methylammonium lead iodide perovskite solar cells10.1021/acs.jpclett.6b01176 ↗
56. Degradation mechanism of a junction-free transparent silver network electrode10.1039/C6RA15135C ↗
57. Systematic investigation of the impact of operation conditions on the degradation behaviour of perovskite solar cells10.1038/s41560-017-0060-5 ↗
58. Krebs · 2012
59. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗