journal article·2021-03

Understanding deposition temperature dependent photovoltaic characteristics of Cu(In,Ga)Se2 solar cells: A study with thermally stable alkali aluminosilicate glass substrates

Muhammad Saifullah, Jae Ho Yun, Jihye Gwak, Joo Hyung Park, Yunae Cho, T. Bertram, T. Kodalle, R. Schlatmann, C.A. Kaufmann

Publisher page

Abstract

Abstract During 3-stage thermal co-evaporation of Cu(In,Ga)Se2 (CIGSe), alkali aluminosilicate (AAS) glass has proven to be stable at process temperatures Tmax of up to 650 °C. This is considerably higher than the maximum endurable Tmax for soda-lime glass (SLG), which is in the range of 530–550 °C. As the Na-content of the AAS glass used here is comparable to that of SLG, growing CIGSe at elevated Tmax is expected to promote Na diffusion from the glass substrate through the Mo back contact (BC) into the absorber layer. An increased Na concentration in the CIGSe absorber would be expected to result in an improved device performance as it is mostly associated with an increased open-circuit voltage (Voc) and fill factor (FF). This paper discusses the influence of varying Tmax from 530 to 650 °C during the 2nd and the 3rd stage of the 3-stage process on the morphological, electrical, and photovoltaic performance of CIGSe solar cells. Upon raising Tmax from 530 to 650 °C, the short-circuit current density (Jsc) decreased due to bandgap (Eg) widening. Glow discharge optical emission spectrometry analysis reveals that the Na concentration in the absorber is gradually decreased when elevating Tmax. As will be seen, we attribute this in part to a densification of the Mo BC during the high temperature process. A maximum conversion efficiency (η) was realized at Tmax = 600 °C. An increased Voc at Tmax = 600 °C is due to the wider Eg and to an increased carrier concentration despite the fact that the Na concentration in the CIGSe thin film was low compared to lower Tmax. Admittance spectroscopy analysis is performed to access information on defect energy level and density in the finished devices. In the light of present findings, ways to further improve η at elevated Tmax are suggested.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Cd-free Cu(in,Ga)(Se,S)2 thin-film solar cell with record efficiency of 23.35%10.1109/JPHOTOV.2019.2937218 ↗
2. Properties of 19.2% efficiency ZnO/CdS/CuInGaSe2 thin-film solar cells10.1002/pip.494 ↗
3. CIGS absorbers and processes10.1002/pip.969 ↗
4. Baseline Cu(In,Ga)Se2 device production: control and statistical significance10.1016/S0927-0248(00)00264-6 ↗
5. High efficiency Cu(In,Ga)Se2-based solar cells: processing of novel absorber structures
6. Albin · 1995
7. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
8. Properties of Cu(in,Ga)Se2 thin film solar cells on Ga temperature variation10.1080/15421406.2010.497091 ↗
9. Technological status of Cu(In,Ga)(Se,S)2-based photovoltaics10.1016/j.solmat.2013.08.030 ↗
10. Effect of substrate temperature on the structural and electrical properties of CIGS films based on the one-stage co-evaporation process10.1088/0268-1242/25/5/055007 ↗
11. Growth of Cu(In,Ga)Se2 films using a Cu-poor/rich/poor sequence: substrate temperature effects10.1016/S0040-6090(03)00222-0 ↗
12. Effects of substrate temperature on the structural and electrical properties of Cu(In,Ga)Se2 thin films10.1016/j.solmat.2008.09.002 ↗
13. Effect of substrate temperature during the three-stage process on the CuInSe2 solar cell characteristics10.1016/j.cap.2017.05.014 ↗
14. Ga gradients in Cu(In,Ga)Se2: formation, characterization, and consequences10.1063/1.4866255 ↗
15. Unveiling the effects of post-deposition treatment with different alkaline elements on the electronic properties of CIGS thin film solar cells10.1039/c4cp00614c ↗
16. Effects of sodium on growth and properties of Cu(In,Ga)Se₂ thin films and solar cells
17. Evolution of opto-electronic properties during film formation of complex semiconductors10.1038/srep45463 ↗
18. Functional data analysis of electrical measurements on thin-film photovoltaic devices10.1109/JPHOTOV.2019.2924395 ↗
19. Glow discharge optical emission spectrometry for quantitative depth profiling of CIGS thin-films10.1039/C9JA00075E ↗
20. Device and material characterization of Cu(InGa)Se2 solar cells with increasing band gap10.1063/1.361431 ↗
21. Sodium incorporation strategies for CIGS growth at different temperatures10.1016/j.tsf.2004.11.071 ↗
22. Comparative study of the role of Ga in CIGS solar cells with different thickness10.1016/j.tsf.2015.12.020 ↗
23. Preparation and properties of CuInSe2 thin films produced by selenization of co-sputtered Cu-In films10.1016/0040-6090(94)90675-0 ↗
24. Raman spectroscopy of (CuInSe2)X – (2ZnSe)1-X thin films10.1002/pssc.200405417 ↗
25. Preparation of CuInSe2 by e-beam ablation technology and properties of thin films - solar cell components
26. Influence of varying Cu content on growth and performance of Ga-graded Cu(in,Ga)Se2 solar cells10.1109/JPHOTOV.2015.2478033 ↗
27. CIGS thin film and device performance produced through a variation Ga concentration during three-stage growth process10.1016/j.mssp.2018.07.020 ↗
28. Effect of Ga/Cu ratio on polycrystalline CuGaSe 2 thin film solar cell10.1155/2011/573094 ↗
29. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
30. Effects of Na incorporation on electrical properties of Cu(In,Ga)Se2-based photovoltaic devices on polyimide substrates10.1016/j.solmat.2014.05.009 ↗
31. Influence of Na on grain boundary and properties of Cu(In,Ga)Se2 solar cells10.1002/pip.2869 ↗
32. Na distribution in Cu(In,Ga)Se2 thin films: investigation by atom probe tomography10.1016/j.scriptamat.2015.03.028 ↗
33. Optical analysis of the microstructure of a Mo back contact for Cu(In,Ga)Se2 solar cells and its effects on Mo film properties and Na diffusivity10.1016/j.solmat.2011.02.030 ↗
34. Influence of substrates on the electrical properties of Cu(In,Ga)Se2 thin films10.1016/0927-0248(95)00105-0 ↗
35. Incorporation of alkali metals in chalcogenide solar cells10.1016/j.solmat.2015.06.011 ↗
36. Review on alkali element doping in Cu(in,Ga)Se2 thin films and solar cells
37. Effects of Na on the electrical and structural properties of CuInSe210.1063/1.370534 ↗
38. Bulk and metastable defects in CuIn1−xGaxSe2 thin films using drive-level capacitance profiling10.1063/1.1633982 ↗
39. The role of sulfur in solution-processed Cu2ZnSn(S,Se)4 and its effect on defect properties10.1002/adfm.201201732 ↗
40. Electrical characterization of defects in Cu-rich grown CuInSe2 solar cells10.1109/JPHOTOV.2015.2508239 ↗
41. Thin film material properties
42. Admittance spectroscopy of cadmium free CIGS solar cells heterointerfaces10.1016/j.tsf.2005.11.087 ↗
43. Defect properties of CuInSe2 and CuGaSe210.1016/j.jpcs.2005.10.003 ↗