journal article·2015-03

Determining the photocurrent of individual cells within an organic solar module by LBIC and the filtering approach: Experiments and simulations

Jens Reinhardt, Pälvi Apilo, Birger Zimmermann, Sanna Rousu, Uli Würfel

Publisher page

Abstract

Light beam induced current (LBIC) measurements of ITO-free organic photovoltaic modules with monolithic series connection are presented. Selective bias illumination is used to extract the light beam generated current from the module. A large variation of the photocurrent is observed among the cells which is unlikely to match the real generated photocurrent. In order to investigate this behavior, a novel approach (filtering approach) is presented in which the photocurrent of the measured cell is reduced while the remaining cells are kept under full illumination. This method enables the detection of the correct photocurrent of each cell and thus to identify the cell which limits the module current if all the cells comprise large parallel resistances. Dark lock-in thermography measurements of the module revealed several shunted cells. In this case the filtering approach overestimates the photocurrent. Numerical simulations of LBIC applied to modules using either selective bias illumination or forward bias voltage were carried out to understand the observed behavior in detail. The results reveal that a reliable detection of the photocurrent is impossible when several cells have rather low parallel resistances. Whereas for selective bias illumination the photocurrent response of the measured cell is an unambiguous function of the cell?s parallel resistance this is not the case for an applied forward bias voltage.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. 25th anniversary article: rise to power – OPV-based solar parks10.1002/adma.201302031 ↗
2. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
3. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
4. M. Hosoya, H. Oooka, H. Nakao, S. Mori, T. Gotanda, N. Shida, R. Hayase, Y. Nakano, M. Saito, Module Development for Organic Thin-Film Photovoltaics, in: Proceedings of the EU PVSEC 2013: 28th European Photovoltaic Solar Energy Conference and Exhibition, Parc des Expositions Paris Nord Villepinte, Paris, France, WIP, München, 2013, pp. 2236–2238.
5. Technology development for roll-to-roll production of organic photovoltaics10.1016/j.cep.2010.07.012 ↗
6. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
7. Scalability and stability of very thin, roll-to-roll processed, large area, indium-tin-oxide free polymer solar cell modules10.1016/j.orgel.2012.12.033 ↗
8. Fast inline roll-to-roll printing for indium-tin-oxide-free polymer solar cells using automatic registration10.1002/ente.201200029 ↗
9. It is all in the pattern—high-efficiency power extraction from polymer solar cells through high-voltage serial connection10.1002/ente.201200055 ↗
10. Roll-to-roll gravure printing of organic photovoltaic modules-insulation of processing defects by an interfacial layer
11. Electroluminescence imaging of organic photovoltaic modules10.1063/1.3521259 ↗
12. Luminescence imaging of polymer solar cells: visualization of progressing degradation10.1063/1.3553864 ↗
13. Identifying the impact of surface recombination at electrodes in organic solar cells by means of electroluminescence and modeling10.1002/aenm.201400081 ↗
14. Comparison of electroluminescence intensity and photocurrent of polymer based solar cells10.1002/aenm.201100496 ↗
15. Investigation of the degradation mechanisms of a variety of organic photovoltaic devices by combination of imaging techniques—the ISOS-3 inter-laboratory collaboration10.1039/c2ee03508a ↗
16. Quality control of roll-to-roll processed polymer solar modules by complementary imaging methods10.1016/j.solmat.2011.10.005 ↗
17. Printed metal back electrodes for R2R fabricated polymer solar cells studied using the LBIC technique10.1016/j.solmat.2010.11.007 ↗
18. Formation and impact of hot spots on the performance of organic photovoltaic cells10.1063/1.3073857 ↗
19. Quality control of polymer solar modules by lock-in thermography10.1063/1.3272709 ↗
20. Highly sensitive non-contact shunt detection of organic photovoltaic modules10.1016/j.solmat.2012.01.022 ↗
21. Organic solar cells characterized by dark lock-in thermography10.1016/j.solmat.2009.11.006 ↗
22. Multi-laser LBIC system for thin film PV module characterisation10.1016/j.solmat.2008.10.019 ↗
23. CELLO: an advanced LBIC measurement technique for solar cell local characterization10.1016/S0927-0248(02)00270-2 ↗
24. Extraction of individual-cell photocurrents and shunt resistances in encapsulated modules using large-scale laser scanning10.1002/(SICI)1099-159X(199601/02)4:1<63::AID-PIP112>3.0.CO;2-R ↗
25. 2D characterization of OPV from single and tandem cells to fully roll-to-roll processed modules with and without electrical contact10.1002/adom.201400016 ↗
26. ITO-free flexible inverted organic solar cell modules with high fill factor prepared by slot die coating10.1016/j.solmat.2010.11.025 ↗
27. Analysis of the degradation mechanism of ITO-free organic solar cells under UV radiation10.1016/j.solmat.2013.10.021 ↗
28. Influence of the acceptor on electrical performance and charge carrier transport in bulk heterojunction solar cells with HXS-110.1021/jp408705r ↗
29. Measuring the external quantum efficiency of two-terminal polymer tandem solar cells10.1002/adfm.201001167 ↗