journal article·2012-07

Surface potential imaging of PV cells with a Kelvin probe

Chris Yang, Yury Pyekh, Steven Danyluk

Publisher page

Abstract

Abstract This paper describes a Kelvin probe based inspection technique which measures surface potentials (SP) at various illumination conditions and derives the delta surface potential (Δ V SP ) and surface band bending ( ϕ ) of photovoltaic (PV) cells. The Δ V SP is the difference of surface potential measured in light and dark conditions respectively. The delta surface potential (Δ V SP ) is related to charge injection and carrier lifetime, while the surface band bending ( ϕ ) is associated with the surface condition. A white light and short wavelength light illuminations are used to distinguish the bulk effects from that of the surface. A scanning vibrating Kelvin probe system was built to image PV cells with and without illumination. Experiments were performed on both single crystalline silicon (sc-Si) and multi-crystalline silicon (mc-Si) cells. It is found that the sc-Si cells possess a higher Δ V SP but a lower ϕ than that of mc-Si cells. The average Δ V SP and ϕ are 350 mV and 50 mV for the sc-Si cells, and 280 mV and 110 mV for the mc-Si cells. Process defects on a surface could affect both parameters, and it is found that the Δ V SP is not uniform and could be reduced to 170 mV at a defect on the mc-Si cells. The high Δ V SP and low ϕ s are expected to contribute to the high conversion efficiency on a cell.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Integrated Circuits and Semiconductor Failure Analysis · Silicon and Solar Cell Technologies · Near-Field Optical Microscopy

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Solar cell efficiency tables (Version 38)10.1002/pip.1150 ↗
2. Crystalline Silicon Solar Cells and Modules
3. Physics of Photovoltaic Materials
4. Photovoltaic measurements10.1016/0379-6787(85)90007-9 ↗
5. Defect recognition and impurity detection techniques in crystalline silicon for solar cells10.1016/S0927-0248(01)00192-1 ↗
6. Minority carrier lifetime in polycrystalline silicon solar cells studied by photoassisted Kelvin probe force microscopy10.1063/1.2957468 ↗
7. Classification of shunting mechanisms in crystalline silicon solar cells10.1016/S0927-0248(01)00191-X ↗
8. Kelvin probe force microscopy and its application10.1016/j.surfrep.2010.10.001 ↗
9. Surface photovoltage phenomena: theory, experiment, and applications10.1016/S0167-5729(99)00002-3 ↗
10. Photoassisted Kelvin probe force microscopy on multicrystalline Si solar cell materials10.1143/JJAP.50.08LA05 ↗
11. Utilisation of a micro-tip scanning Kelvin probe for non-invasive surface potential mapping of mc-Si solar cells10.1016/S0927-0248(03)00064-3 ↗
12. Scanning Kelvin probe and surface photovoltage analysis of multicrystalline silicon10.1016/S0921-5107(01)01018-2 ↗
13. QSS-μPCD measurement of lifetime in silicon wafers: advantages and new applications10.1016/j.egypro.2011.06.113 ↗
14. Kelvin probe force microscopy of semiconductor surface defects10.1103/PhysRevB.70.085320 ↗
15. Local measurement of semiconductor band bending and surface charge using Kelvin probe force microscopy10.1016/j.susc.2004.10.042 ↗
16. Kelvin probe measurements of microcrystalline silicon on a nanometer scale using SFM10.1016/S0927-0248(00)00170-7 ↗
17. Microelectrical characterizations of junctions in solar cell devices by scanning Kelvin probe force microscopy10.1016/j.ultramic.2009.03.048 ↗
18. Surface potential mapping of biased pn junction with kelvin probe force microscopy: application to cross-section devices10.1016/j.apsusc.2004.03.249 ↗
19. Measurement of perfluoropolyether lubricant thickness on a magnetic disk surface10.1063/1.1390323 ↗
20. Kelvin probe study on the perfluoropolyether film on metals10.1023/A:1016622024079 ↗
21. Schroder · 2006