journal article·2021-06

Effectively transparent electrical contacts for thermally sensitive solar cells

Maria Kanwal, Nadia Shahzad, Muhammad Ali Tariq, Muhammad Imran Shahzad

Publisher page

Abstract

Abstract High conductivity silver pastes are usually incompatible for use with thermally sensitive devices due to their higher sintering temperatures while nanoparticle inks are costly and undergo high particle agglomeration. Effectively transparent contacts (ETCs) have been designed to increase the transmittance, reduce reflectance and overcome shadowing losses in solar cells while enhancing the overall conductivity and charge collection through the grid. In this study, reactive silver ink (RSI) is mixed with a low temperature sintering conductive silver paste (150 °C) for deposition via a microchannel approach. ETCs deposited using the resulting composite were cured at a lower temperature (100 °C) with a conductivity of the order of 103 1/Ω-cm and a transparency >90% in the visible region, promising a reduction in optical and electrical losses when compared to bare transparent conductive oxides. The use of low temperature curing conductive material makes ETCs suitable for use in thermally sensitive optoelectronic and photovoltaic devices, hence they were ultimately deposited on perovskite solar cells and the solar cell parameters were measured.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Nanowire Synthesis and Applications · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Effect of front TCO on the performance of rear-junction silicon heterojunction solar cells: insights from simulations and experiments10.1016/j.solmat.2019.01.047 ↗
2. Jahelka · 2016 · 1
3. R. Saive, T. C. R. Russell, and H. A. Atwater, “Light Trapping in Bifacial Solar Modules Using Effectively Transparent Contacts ( ETCs ), pp. 2–5.
4. https://www.nrel.gov/pv/module-efficiency.html.” .
5. Limiting efficiency of silicon solar cells10.1109/T-ED.1984.21594 ↗
6. Contact resistance: its measurement and relative importance to power loss in a solar cell10.1109/T-ED.1984.21584 ↗
7. Light trapping in ultrathin plasmonic solar cells10.1364/OE.18.00A237 ↗
8. Silicon heterojunction solar cells with e ffectively transparent front contacts10.1039/C7SE00096K ↗
9. Multi-material front contact for 19% thin film solar cells10.3390/ma9020096 ↗
10. Solar Energy Materials and Solar Cells Improved light management in planar silicon and perovskite solar cells using PDMS scattering layer10.1016/j.solmat.2017.06.020 ↗
11. Silver nanoparticles ink synthesis for conductive patterns fabrication using inkjet printing technology
12. Low-temperature drop-on-demand reactive silver inks for solar cell front-grid metallization10.1109/JPHOTOV.2016.2621351 ↗
13. Reactive silver inks for patterning high-conductivity features at mild temperatures10.1021/ja209267c ↗
14. Evolutionary PERC+ solar cell efficiency projection towards 24% evaluating shadow-mask-deposited poly-Si fingers below the Ag front contact as next improvement step10.1016/j.solmat.2020.110586 ↗
15. Aerosol jet printed grid for ITO-free inverted organic solar cells10.1016/j.solmat.2012.06.042 ↗
16. Transparent , conductive and lightweight superstrates for perovskite solar cells and modules
17. Low-temperature drop-on-demand reactive silver inks for solar cell
18. Microchannel contacting of crystalline silicon solar cells10.1038/s41598-017-08913-y ↗
19. Saive · 2017 · 1
20. Saive · 2016 · 1470
21. Walker · 2012
22. Formation of more stable hydrophilic surfaces of PDMS by plasma and chemical treatments10.1016/j.mee.2006.01.195 ↗
23. Impact of solvent selection and temperature on porosity and resistance of printed self-reducing silver inks
24. Plasma Treated PDMS for improved bonding performance of microfluidic devices Plasma Treated PDMS for improved bonding performance of microfluidic devices
25. Compositional engineering for efficient wide band gap perovskites with improved stability to photoinduced phase segregation10.1021/acsenergylett.7b01255 ↗
26. Minimizing current and voltage losses to reach 25% efficient monolithic two-terminal perovskite-silicon tandem solar cells10.1021/acsenergylett.8b01201 ↗
27. Nonradiative recombination in perovskite solar cells: the role of interfaces10.1002/adma.201902762 ↗
28. 23.6%-Efficient monolithic perovskite/silicon tandem solar cells with improved stability10.1038/nenergy.2017.9 ↗