Freeform surface invisibility cloaking of interconnection lines in thin-film photovoltaic modules
Source abstract
Abstract
Abstract The vast majority of conventional photovoltaic (PV) module technologies suffer from inactive areas, for example, due to the front contact finger grids or interconnection lines, which are essential for efficient extraction of the photocurrent. Invisibility cloaking by freeform surfaces is a new concept to guide incident light of the entire solar spectrum and all angles of incidence away from these inactive areas to the active areas of the PV modules. In this work, a freeform surface design is incorporated into a standard encapsulation layer of conventionally front glass covered PV modules. For a copper indium gallium diselenide (CIGS) thin-film PV module, a relative improvement in power conversion efficiency of 6.5% is presented, which demonstrates that the entire optical losses of the inactive area can be recovered. The design of the freeform surface is optimized based on rigorous ray-tracing simulations, which further allow discriminating and quantifying the underlying optical effects. Moreover, in order to demonstrate the scalability of the freeform surface cloak, a prototype CIGS thin-film PV module (comprised of nine monolithically interconnected solar cells) exhibiting fully-cloaked interconnection lines is presented.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: solar cell performance optimization · Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. R. Fu, D. Chung, T. Lowder, D. Feldman, K. Ardani, R. Margolis, U.S. Solar. Photovoltaic System Cost Benchmark: Q1 2016, 2009. 〈https://www.nrel.gov/docs/fy16osti/66532.pdf〉. (Accessed 6 October 2017).10.2172/1326888 ↗
2. A study of shading and resistive loss from the fingers of encapsulated solar cells10.1016/S0927-0248(99)00024-0 ↗
3. Large-area CIGS modules: processes and properties10.1016/S0040-6090(03)00255-4 ↗
4. Reducing shadowing losses with femtosecond-laser-written deflective optical elements in the bulk of EVA encapsulation10.1002/pip.2530 ↗
5. Diffractive optical elements utilized for efficiency enhancement of photovoltaic modules10.1364/OE.19.011397 ↗
6. Silicon heterojunction solar cells with effectively transparent front contacts, Sustain
7. Effectively transparent front contacts for optoelectronic devices10.1002/adom.201600252 ↗
8. P. Jahelka, R. Saive, H. Atwater, Total Internal Reflection for Effectively Transparent Solar Cell Contacts, preprint a (2016) arXiv:1610.01047v1. 〈http://arxiv.org/abs/1610.01047〉 (Accessed 5 July 2017).
9. Increasing light capture in silicon solar cells with encapsulants incorporating air prisms to reduce metallic contact losses10.1364/OE.24.0A1419 ↗
10. The sawtooth coverslide: a new means of coupling light into solar cells10.2514/3.47937 ↗
11. A. Boca, K.M. Edmondson, R.R. King, Prismatic covers for boosting the efficiency of high-concentration PV systems, in: 2009 34th IEEE Photovolt. Spec. Conference, IEEE: 2009: pp. 131–136. 〈http://dx.doi.org/10.1109/PVSC.2009.5411714〉.10.1109/PVSC.2009.5411714 ↗
12. V.M. Andreev, A.B. Kazantsev, V.P. Khvostikov, E.V. Paleeva, V.D. Rumyantsev, M.Z. Shvarts, High-efficiency (24.6% AM 0) LPE grown AlGaAs/GaAs concentrator solar cells and modules, in: Proceedings of the 1994 IEEE 1st World Conference Photovolt. Energy Convers., IEEE,1994, pp. 2096–2099. 〈http://dx.doi.org/10.1109/WCPEC.1994.521634〉.10.1109/WCPEC.1994.521634 ↗
13. Combined effect of light harvesting strings, anti-reflective coating, thin glass, and high ultraviolet transmission encapsulant to reduce optical losses in solar modules10.1002/pip.2470 ↗
14. R. Ebner, M. Schwark, B. Kubicek, G. Újvári, W. Mühleisen, L. Neumaier, M. Pedevilla, J. Scheurer, A. Plösch, A. Kogler, H. Muckenhuber, Increased power output of crystalline silicon Pv modules by alternative interconnection applications, in: PVSEC. 28, WIP, 2013, pp. 489–494. 〈http://dx.doi.org/10.4229/28THEUPVSEC.2013-1CV.2.16〉.
15. Cloaking of solar cell contacts at the onset of Rayleigh scattering10.1038/srep28669 ↗
16. Electrohydrodynamic NanoDrip printing of high aspect ratio metal grid transparent electrodes10.1002/adfm.201503705 ↗
17. Back-contact solar cells: a review10.1002/pip.657 ↗
18. Silicon back contact solar cell configuration: a pathway towards higher efficiency10.1016/j.rser.2016.03.004 ↗
19. An optimized prismatic cover design for concentrator and nonconcentrator solar cells10.1063/1.346705 ↗
20. M.F. Schumann, S. Wiesendanger, J.-.C. Goldschmidt, K. Bittkau, U.W. Paetzold, A. Sprafke, R.B. Wehrspohn, C. Rockstuhl, M. Wegener, Cloaking of metal contacts on solar cells, in: CLEO 2015, OSA, Washington, D.C., p. SW1I.6. 〈http://dx.doi.org/10.1364/CLEO_SI.2015.SW1I.6〉.10.1364/CLEO_SI.2015.SW1I.6 ↗
21. All-angle invisibility cloaking of contact fingers on solar cells by refractive free-form surfaces10.1002/adom.201700164 ↗
22. A new solar radiation database for estimating PV performance in Europe and Africa10.1016/j.solener.2012.03.006 ↗
23. K.R. McIntosh, J.N. Cotsell, J.S. Cumpston, A.W. Norris, N.E. Powell, B.M. Ketola, An optical comparison of silicone and EVA encapsulants for conventional silicon PV modules: A ray-tracing study, in: 2009 34th IEEE Photovolt. Spec. Conference, IEEE: 2009: pp. 000544–000549. 〈http://dx.doi.org/10.1109/PVSC.2009.5411624〉.10.1109/PVSC.2009.5411624 ↗
24. High-efficiency Cu(In,Ga)Se2 cells and modules10.1016/j.solmat.2013.05.002 ↗
25. The effect of damp-heat and UV aging tests on the optical properties of silicone and EVA encapsulants10.1002/pip.1025 ↗
26. Measurement of sheet resistivities with the four-point10.1002/j.1538-7305.1958.tb03883.x ↗
27. Cloaked contact grids on solar cells by coordinate transformations: designs and prototypes10.1364/OPTICA.2.000850 ↗
28. Roll-to-roll hot embossing of microstructures10.1007/s00542-010-1158-x ↗
29. H.-C. Eckstein, U.D. Zeitner, R. Leitel, M. Stumpf, P. Schleicher, A. Bräuer, A. Tünnermann, High dynamic grayscale lithography with an LED-based micro-image stepper, in: A. Erdmann, J. Kye (eds.), SPIE Adv. Lithogr. Proc., International Society for Optics and Photonics, San Jose, CA, 2016, p. 97800T. 〈http://dx.doi.org/10.1117/12.2219099〉.10.1117/12.2219099 ↗