Partially interpenetrating heterojunction on bilayer photovoltaic devices of electrodeposited polythiophene/methanofullerene
Source abstract
Abstract
Abstract Parent or unsubstituted polythiophene (PT) films electrodeposited on hole-extraction-layer-coated ITO electrodes were used as the donor material in bilayer organic photovoltaic (OPV) devices. The electrodeposited PT layers had a porous surface with numerous voids and hollows of nanometer dimensions. The acceptor, [6] , [6] -phenyl-C61-butyric acid methyl ester (PCBM), was deposited on the PT layer by spin-coating from chlorobenzene solutions. Cross-sectional STEM-EDS (scanning transmission electron microscopy combined with energy dispersive X-ray spectroscopy) analysis revealed that some of the PCBM molecules infiltrated into the PT layer to form a PT/PCBM interpenetrating layer 8–9 nm thick between homogeneous PT and PCBM layers. The PT-based OPV devices fabricated with an optimal PT layer thickness (20 nm) showed a power conversion efficiency of 1.5% under AM 1.5 G (100 mW/cm2) illumination, which is higher than that of previously reported OPV devices using electrodeposited polythiophenes in the active layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Importance of disordered polymer segments to microstructure-dependent photovoltaic properties of polymer–fullerene bulk heterojunction solar cells10.1021/jp2023296 ↗
2. Conjugated Polymer-Based Organic Solar Cells10.1021/cr050149z ↗
3. Solar cells utilizing small molecular weight organic semiconductors10.1002/pip.788 ↗
4. A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells10.1038/nmat1574 ↗
5. Efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
6. High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1- phenyl-(6,6)C61 blends10.1063/1.2006986 ↗
7. Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly(3-hexylthiophene)10.1063/1.2008386 ↗
8. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
9. New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer10.1002/adma.200501825 ↗
10. p-Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells10.1073/pnas.0711990105 ↗
11. Optical and Electrical Properties of Electrochemicaly Doped n- and p-Type Polythiophenes10.1143/JJAP.23.L189 ↗
12. Cycle life, stability, and characteristics of color switching cells utilizing polythiophene films10.1063/1.338167 ↗
13. On propagation mechanism of the electrochemically doped conductive layer in polypyrrole films by means of the analysis of linear sweep anodic voltammograms
14. Kinetics of oxidation of polypyrrole-coated transparent electrodes by in situ linear sweep voltammetry and spectroscopy10.1016/0379-6779(89)90660-7 ↗
15. Chronoamperometric response to potentiostatic doping at polypyrrole-coated microdisk electrodes10.1016/0022-0728(89)80237-2 ↗
16. Direct demonstration of the propagation theory of a conductive zone in a polypyrrole film by observing temporal and spatial variations of potentials at addressable microband array electrodes10.1016/0022-0728(89)87010-X ↗
17. Observation of propagation speed of conductive front in electrochemical doping process of polypyrrole films10.1246/bcsj.64.2045 ↗
18. Concentration distribution of conducting species with time-resolution in electrochemical undoping process at the polypyrrole-film-coated electrode in the light of electric percolation10.1016/0022-0728(95)04100-3 ↗
19. Concentration profiles of conducting species in polypyrrole films in cyclic voltammetry by means of a diode array detector10.1016/S0022-0728(96)04952-2 ↗
20. A fractal feature of the conducting zone by conversion rates from any redox state into the fully conducting state of polyaniline films10.1016/S0022-0728(97)00062-4 ↗
21. Alternation of conducting zone from propagation-control to diffusion-control at polythiophene films by solvent substitution10.1016/S0013-4686(98)00328-4 ↗
22. Electrochemically deposited poly(3-methylthiophene) performance in single layer photovoltaic devices10.1140/epje/e2004-00022-7 ↗
23. Poly(3-methylthiophene)-based photovoltaic devices prepared onto tin-oxide/sulfonated-polyaniline electrodes10.1016/j.elecom.2004.02.001 ↗
24. Sulfonated polyaniline/poly(3-methylthiophene)-based photovoltaic devices10.1007/s10008-005-0648-8 ↗
25. Organic photovoltaic devices based on polythiophene films electrodeposited on FTO substrates10.1016/j.solmat.2006.12.005 ↗
26. Polythiophene/fullerene bulk heterojunction solar cell fabricated via electrochemical co-deposition10.1016/j.solmat.2006.06.042 ↗
27. Electrochemical fabrication of p-poly(3-methylthiophene)/n-silicon solar cells10.1016/j.solmat.2007.06.010 ↗
28. Electrodeposited, Textured Poly(3-hexyl-thiophene) (e-P3HT) Films for Photovoltaic Applications10.1021/cm8008122 ↗
29. Electrochemically prepared polymer solar cell by three-layer deposition of poly(3,4-ethylenedioxythiophene)/poly(2,2’-bithiophene)/fullerene (PEDOT/PBT/C60)10.1016/j.polymer.2011.06.020 ↗
30. Polythiophene by Solution Processing10.1021/ma071200z ↗
31. Bulk heterojunctions based on native polythiophene10.1021/cm800431s ↗
32. Thermocleavable Materials for Polymer Solar Cells with High Open Circuit Voltage–A Comparative Study10.1021/am900518r ↗
33. Using Light-Induced Thermocleavage in a Roll-to-Roll Process for Polymer Solar Cells10.1021/am900858x ↗
34. Concentration gradient P3OT/PCBM photovoltaic devices fabricated by thermal interdiffusion of separately spin-cast organic layers10.1016/j.solmat.2009.06.009 ↗
35. A photophysical study of PCBM thin films10.1016/j.cplett.2007.08.005 ↗
36. P3HT/PCBM Bulk Heterojunction Organic Photovoltaics: Correlating Efficiency and Morphology10.1021/nl103482n ↗
37. Effects of intrinsic layer thickness on solar cell parameters of organic p–i–n heterojunction photovoltaic cells10.1063/1.1841479 ↗
38. Mixed donor–acceptor molecular heterojunctions for photovoltaic applications. II. Device performance10.1063/1.2142073 ↗
39. Three-layered organic solar cell with a photoactive interlayer of codeposited pigments10.1063/1.104423 ↗
40. p-i-n like behavior in three-layered organic solar cells having a co-deposited interlayer of pigments10.1063/1.352274 ↗