Direct effect of partially photooxidized poly(3-hexylthiophene) on the device characteristics of a bulk heterojunction solar cell
Source abstract
Abstract
Abstract During the photoirreversible degradation of a polymer solar cell (PSC), it is generally assumed that the photooxidation of the organic materials (P3HT, PCBM) affects the device performance. Photooxidation of the organic materials results in a decrease in absorbance as a result of photodecomposition. However, the effect of initial photooxidation on device performance remains to be investigated. In this study, we try to establish the correlation between the initial photooxidation of the organic material and the photovoltaic performance of the PSC. Towards this aim, we investigated the device characteristics by employing a slightly degraded organic material, which had been prepared by photooxidation of the material in the solution state. UV–vis and FT-IR spectra suggest a decrease in the π-conjugation length along with the formation of ketone and sulfoxide derivatives. MALDI-TOF mass spectra indicated the partial molecular scission of P3HT even at the start of photooxidation. A deterioration in performance was observed during the device characterization, as was an increase in the resistance of the organic films. These results indicate that the fragments and oxides generated by the partial molecular scission of P3HT increase the resistance of organic films, resulting in a drop in device performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
2. Polymer solar cells10.1038/nphoton.2012.11 ↗
3. Hybrid photovoltaic devices from regioregular polythiophene and ZnO nanoparticles composites10.1016/j.renene.2010.04.014 ↗
4. Exploiting optical anisotropy to increase the external quantum efficiency of flexible P3HT:PCBM blend solar cells at large incident angles10.1016/j.solmat.2011.03.015 ↗
5. Fe3O4 nanoparticles induced magnetic field effect on efficiency enhancement of P3HT:PCBM bulk heterojunction polymer solar cells10.1016/j.solmat.2011.06.005 ↗
6. Effects of various solvent addition on crystal and electrical properties of organic solar cells with P3HT:PCBM active layer10.1016/j.synthmet.2012.01.008 ↗
7. P3HT based solution-processed pseudo bi-layer organic solar cell with enhanced performance10.1016/j.orgel.2012.05.054 ↗
8. Polymer solar cell modules prepared using roll to roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
9. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
10. Stability of polymer solar cells10.1002/adma.201104187 ↗
11. Improvement in stability of poly(3-hexylthiophene-2,5-diyl)/[6,6]-phenyl-C61-butyric aicd methyl ester bulk heterojunction solar cell by using UV light irradiation10.1016/j.solmat.2010.08.019 ↗
12. A study of stabilization of P3HT/PCBM organic solar cells by photochemical active TiOx layer10.1016/j.solmat.2010.12.030 ↗
13. Effects of cathode buffer layer on the stability of polymer bulk heterojunction solar cells10.1016/j.solmat.2010.05.043 ↗
14. Long term stability of efficient inverted P3HT:PCBM solar cells10.1016/j.solmat.2008.12.022 ↗
15. Reversible and irreversible degradation of organic solar cell performance by oxygen10.1016/j.solener.2010.09.007 ↗
16. Evaluating carrier accumulation in degraded bulk heterojunction organic solar cells by a thermally stimulated current technique10.1002/adfm.200901573 ↗
17. Oxygen doping of P3HT:PCBM blends: influence on trap states, charge carrier mobility and solar cell performance10.1016/j.orgel.2010.07.016 ↗
18. Influence of photo-induced degradation on the optoelectronic properties of regioregular poly(3-hexylthiophene)10.1016/j.solmat.2008.01.002 ↗
19. The solubility of oxygen and ozone in liquids
20. The use of 2-[(2E)-3-(4-tert-butylphenyl)-2-methylprop-2-enylidene]malononitrile as a matrix for matrix-assisted laser desorption/ionization mass spectrometry10.1255/ejms.329 ↗
21. In situ characterization of lifetime and morphology in operating bulk heterojunction organic photovoltaic devices by impedance spectroscopy10.1002/aenm.201100357 ↗
22. Recent progress in the morphology of bulk heterojunction photovoltaics10.1039/c1sm06147j ↗
23. Manipulating regioregular poly(3-hexylthiophene): [6,6]-phenyl-C61-butyric acid methyl ester blends—route towards high efficiency polymer solar cells10.1039/b703075b ↗
24. Effect of the molecular weight of poly(3-hexylthiophene) on the morphology and performance of polymer bulk-heterojunction solar cells10.1002/marc.200700280 ↗
25. The mechanism of photo- and thermooxidation of poly(3-hexylthiophene) (P3HT) reconsidered10.1016/j.polymdegradstab.2009.03.005 ↗
26. Photo-oxidation and ozonization of poly(3-hexylthiophene) thin films as studied by UV/VIS and photoelectron spectroscopy10.1016/j.polymdegradstab.2010.02.004 ↗
27. Photo- and thermal degradation of MDMO-PPV:PCBM blends10.1016/j.solmat.2006.10.015 ↗
28. The role of electron affinity in determining whether fullerenes catalyze or inhibit photooxidation of polymers for solar cells10.1002/aenm.201200169 ↗
29. Employing MALDI-MS on poly(alkylthiophenes): analysis of molecular weights, molecular weight distributions, end-group structures, and end-group modifications10.1021/ma9905324 ↗
30. Photo-induced oxidation of polythiophene derivatives: dependence on the side chain structures10.1016/j.polymdegradstab.2013.01.006 ↗
31. Controlling the field-effect mobility of regioregular polythiophene by changing the molecular weight10.1002/adma.200305275 ↗
32. High molecular weights, polydispersities, and annealing temperatures in the optimization of bulk-heterojunction photovoltaic cells based on poly(3-hexylthophene) or poly(3-butylthiophene)10.1002/adfm.200600005 ↗
33. Photochemical stability of π-conjugated polymers, electron acceptors and blends for polymer solar cells resolved in terms of film thickness and absorbance10.1039/c2jm16340c ↗
34. Photochemical stability of π-conjugated polymers for polymer solar cells: a rule of thumb10.1039/c0jm03105d ↗