Busbar-free electrode patterns of crystalline silicon solar cells for high density shingled photovoltaic module
Source abstract
Abstract
As new technologies for high-performance PV modules are developed and applied, the cost of the PV modules is also increasing. To reduce the consumption of Ag paste used for the high-power shingled PV module, a new patterns of electrode design is needed. Accordingly, we focused on reducing the consumption of Ag paste used for the metallization of solar cells by designing busbar-free electrode patterns suitable for shingled photovoltaic modules. In this paper, we introduced the busbar-free design of the electrode patterns on the front and rear side of the crystalline silicon solar cells. Based on the conventional and the busbar free designs, the shingled string of each type of electrode pattern was manufactured and its characteristics were investigated. The efficiency of the busbar-free type of shingled string was almost the same as that of the string having the conventional pattern. The proposed electrode pattern did not affect the efficiency or output power of the shingled module, while the amount of Ag usage in the solar cells was reduced by more than 60%. As a result, we confirmed that the busbar free electrode pattern proposed in this study was suitable for a cost-effective shingled PV module.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photovoltaic System Optimization Techniques · solar cell performance optimization · Photovoltaic Systems and Sustainability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. A review of interconnection technologies for improved crystalline silicon solar cell photovoltaic module assembly10.1016/j.apenergy.2015.04.120 ↗
2. Progress in solar PV technology: research and achievement10.1016/j.rser.2012.09.028 ↗
3. Back‐contact solar cells: a review10.1002/pip.657 ↗
4. A mathematical model for cell-to-module conversion considering mismatching solar cells and the resistance of the interconnection ribbon10.1016/j.solener.2014.01.032 ↗
5. Field failure mechanism study of solder interconnection for crystalline silicon photovoltaic module10.1016/j.microrel.2012.06.027 ↗
6. Metallization of crystalline silicon solar cells for shingled photovoltaic module application10.1016/j.solener.2019.11.095 ↗
7. Improved efficiency silicon solar cell module10.1109/55.553040 ↗
8. Solar cell improvement by using a multi busbar design as front electrode10.1016/j.egypro.2012.07.056 ↗
9. Detection of soldering induced damages on crystalline silicon solar modules fabricated by hot-air soldering method10.1016/j.renene.2015.05.017 ↗
10. Conductive adhesives for low-stress interconnection of thin back-contact solar cells
11. Analysis for the degradation mechanism of photovoltaic ribbon wire under thermal cycling
12. Residual stress analysis and bow simulation of crystalline silicon solar cells10.1631/jzus.A1500279 ↗
13. Improved quality test method for solder ribbon interconnects on silicon solar cells
14. Mechanical behaviour and fatigue of copper ribbons used as solar cell interconnectors
15. Electrically conductive adhesives and the shingled array cell for high density modules10.1166/jnn.2019.16200 ↗
16. Shingling technology for cell interconnection: technological aspects and process integration10.1016/j.egypro.2018.09.010 ↗
17. Materials challenge for shingled cells interconnection10.1016/j.egypro.2016.10.087 ↗
18. Analysis of solar cells interconnected by electrically conductive adhesives for high-density photovoltaic modules10.1016/j.apsusc.2019.03.307 ↗
19. Electrically conductive adhesives as cell interconnection material in shingled module technology10.1063/1.5049305 ↗
20. Reliable interconnection of the front side grid fingers using silver-reduced conductive adhesives10.1016/j.egypro.2014.08.098 ↗
21. Low-cost contact formation of high-efficiency crystalline silicon solar cells by plating
22. Investigation on plated Ni/Cu contact for mono-crystalline silicon solar cells10.1007/s13391-013-2169-4 ↗
23. Design of a solar cell electrode for a shingled photovoltaic module application10.1016/j.apsusc.2020.145420 ↗
24. Analysis of resistance according to metal ribbon connection for application to interconnection of shingled photovoltaic strings10.1166/jnn.2020.18836 ↗
25. A quantitative analysis of photovoltaic modules using halved cells10.1155/2013/739374 ↗
26. Fast extraction of front ribbon resistance of silicon photovoltaic modules using electroluminescence imaging10.1016/j.solener.2019.11.013 ↗
27. The effect of nonuniform emitter sheet resistance on PERC solar cell performance10.1007/s12633-018-9899-8 ↗
28. A mathematical investigation of the impact of gridline and busbar patterns on commercial silicon solar cell performance10.1007/s10825-020-01455-z ↗
29. Analysis of the losses of industrial‐type PERC solar cells
30. Determination of metal contact recombination parameters for silicon wafer solar cells by photoluminescence imaging10.1016/j.solener.2015.05.010 ↗
31. Loss analysis of 22% efficient industrial PERC solar cells10.1016/j.egypro.2017.09.322 ↗
32. Input parameters for the simulation of silicon solar cells in 201410.1109/JPHOTOV.2015.2430016 ↗
33. Determination of metallization-induced recombination losses of screen-printed silicon solar cell contacts and their dependence on the doping profile10.1109/JPHOTOV.2018.2866177 ↗
34. Solar module fabrication10.1155/2007/27610 ↗