Amorphous tin-gallium oxide buffer layers in (Ag,Cu)(In,Ga)Se2 solar cells
Source abstract
Abstract
Amorphous tin-gallium oxide (a-SGO) grown with atomic layer deposition was evaluated as a buffer layer in (Ag,Cu)(In,Ga)Se2 thin-film solar cells in search for a new material that is compatible with a variety of absorber band gaps. Hard and soft X-ray photoelectron spectroscopy on absorber/a-SGO stacks combined with J–V characterization of solar cells that were fabricated, showed that the conduction band alignment at the absorber/a-SGO interface can be tuned by varying the cation composition and/or growth temperature. Here, the surface band gap was 1.1 eV for the absorber. However, optical band gap data for a-SGO indicate that a suitable conduction band alignment can most likely be achieved even for wider absorber band gaps relevant for tandem top cells. A best efficiency of 17.0% was achieved for (Ag,Cu)(In,Ga)Se2/a-SGO devices, compared to η = 18.6% for the best corresponding CdS reference. Lower fill factor and open-circuit voltage values were responsible for lower cell efficiencies. The reduced fill factor is explained by a larger series resistance, seemingly related to interface properties, which are yet to be optimized. Some layer constellations resulted in degradation in fill factor during light soaking as well. This may partly be explained by light-induced changes in the electrical properties of a-SGO, according to analysis of Al/SGO/n-Si metal-oxide-semiconductor capacitors that were fabricated and characterized with J–V and C–V. Moreover, the introduction of a 1 nm thick Ga2O3 interlayer between the absorber and a-SGO improved the open-circuit voltage, which further indicates that the absorber/a-SGO interface can be improved.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Cd-free Cu(in,Ga)(Se,S)2 thin-film solar cell with record efficiency of 23.35%10.1109/JPHOTOV.2019.2937218 ↗
2. Bimolecular additives improve wide-band-gap perovskites for efficient tandem solar cells with CIGS10.1016/j.joule.2019.04.012 ↗
3. Substitution of the CdS buffer layer in CIGS thin-film solar cells: status of current research and record cell efficiencies10.1002/vipr.201400546 ↗
4. Record 1.0 V open-circuit voltage in wide band gap chalcopyrite solar cells10.1002/pip.2914 ↗
5. Reduced interface recombination in Cu2ZnSnS4 solar cells with atomic layer deposition Zn1−xSnxOy buffer layers10.1063/1.4937998 ↗
6. Zinc-tin-oxide buffer layer and low temperature post annealing resulting in a 9.0% efficient Cd-free Cu2ZnSnS4 solar cell10.1002/solr.201700001 ↗
7. Cadmium free Cu2ZnSnS4 solar cells with 9.7% efficiency10.1002/aenm.201900439 ↗
8. The effect of substrate temperature on atomic layer deposited zinc tin oxide10.1016/j.tsf.2015.04.029 ↗
9. Atomic layer deposition of amorphous tin-gallium oxide films10.1116/1.5092877 ↗
10. Surface passivation of CIGS solar cells using gallium oxide10.1002/pssa.201700826 ↗
11. Material characteristics and applications of transparent amorphous oxide semiconductors10.1038/asiamat.2010.5 ↗
12. Electron affinity and work function of polycrystalline SnO2 thin film10.1007/BF01671438 ↗
13. Tailoring the electronic structure of β-Ga2O3 by non-metal doping from hybrid density functional theory calculations10.1039/C4CP05637J ↗
14. Highly porous gallium oxide with a high CO2 affinity for the photocatalytic conversion of carbon dioxide into methane10.1039/c2jm30337j ↗
15. Cu(In,Ga)Se2 solar cells with amorphous oxide semiconducting buffer layers10.1109/JPHOTOV.2015.2396356 ↗
16. Atomic layer deposition of Zn(O,S) buffer layers for Cu(In,Ga)Se2 solar cells with KF post-deposition treatment10.1016/j.solmat.2018.03.045 ↗
17. Post deposition treatments of (Ag,Cu)(In,Ga)Se2 thin films for solar cells
18. Effect of KF absorber treatment on the functionality of different transparent conductive oxide layers in CIGSe solar cells
19. Inline Cu(in,Ga)Se2 Co-evaporation for high-efficiency solar cells and modules10.1109/JPHOTOV.2013.2256232 ↗
20. In situ lift-out: steps to improve yield and a comparison with other FIB TEM sample preparation techniques10.1016/j.micron.2008.02.006 ↗
21. de la Peña · 2019
22. Extraction of extinction coefficient of weak absorbing thin films from special absorption10.1088/0022-3727/22/9/024 ↗
23. Optical properties and electronic structure of amorphous Ge and Si10.1016/0025-5408(68)90023-8 ↗
24. Precise determination of the valence-band edge in X-ray photoemission spectra: application to measurement of semiconductor interface potentials10.1103/PhysRevLett.44.1620 ↗
25. On the CdS/CuInSe2 conduction band discontinuity10.1063/1.115523 ↗
26. Analysis of Zn(O,S) films for Cu(In,Ga)Se2 solar cells
27. Deposition temperature induced conduction band changes in zinc tin oxide buffer layers for Cu(In,Ga)Se2 solar cells10.1016/j.solmat.2015.09.048 ↗
28. Stability of Cu(In,Ga)Se2 solar cells: a literature review10.1016/j.solener.2016.04.010 ↗
29. Large metastability inCu (In,Ga)Se2 devices: the importance of buffer properties10.1002/pip.3145 ↗
30. Optical Spectroscopic Probes of Degradation and Metastability in Polycrystalline (Ag,Cu)(In,Ga)Se2 Absorbers
31. Sze · 2007