Influence of substrate temperature on the film morphology and photovoltaic performance of non-fullerene organic solar cells
Source abstract
Abstract
Abstract A novel 1,8-naphthalimide-based small molecular acceptor ( NI-T-C8 ) was designed and synthesized. The LUMO level of NI-T-C8 was high-lying, which would reduce the energy loss of WBG polymer PCDTBT-C12 based devices. When non-fullerene devices based on PCDTBT-C12: NI-T-C8 were spin-coated from substrates with a temperature of 30 °C, the aggregation of NI-T-C8 would lead to an unoptimized film morphology and result in a low power conversion efficiency (PCE) of 2.68%. After elevating the substrates from 30 to 45 °C, the domain size of blend films was decreased and a PCE of 3.61% with a high open circuit voltage ( V oc ) of 1.28 V was acquired, but the aggregation of NI-T-C8 for blend films fabricated in 45 °C based substrates was still influence the exciton dissociation in the active layers, lower J sc values for NI-T-C8 based devices in comparison to PC 71 BM based ones were therefore acquired. This is the first single junction organic solar cell with a PCE higher than 3% could achieve a V oc higher than 1.2 V. Our results also demonstrated that elevating the temperature of substrates could reduce the domain size of non-fullerene acceptors, which could provide a strategy to adjust the film morphology of active layer comprising easy-aggregating non-fullerene acceptor.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
2. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
3. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
4. For the Bright Future-Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4%10.1002/adma.200903528 ↗
5. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
6. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
7. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
8. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
9. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
10. Nonfullerene polymer solar cells with 8.5% efficiency enabled by a new highly twisted electron acceptor dimer10.1002/adma.201503801 ↗
11. Non-fullerene acceptors for organic photovoltaics: an emerging horizon10.1039/C4MH00042K ↗
12. Key components to the recent performance increases of solution processed non-fullerene small molecule acceptors10.1039/C5TA04310G ↗
13. Rational design on n-type organic materials for high performance organic photovoltaics10.1039/c3ra22926b ↗
14. Non-fullerene electron acceptors for use in organic solar cells10.1021/acs.accounts.5b00199 ↗
15. Fullerene‐free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
16. A planar copolymer for high efficiency polymer solar cells10.1021/ja9057986 ↗
17. Open-circuit voltage and efficiency improvement of subphthalocyanine-based organic photovoltaic device through deposition rate control10.1016/j.solmat.2012.04.005 ↗
18. Intrinsic burn-in efficiency loss of small-molecule organic photovoltaic cells due to exciton-induced trap formation10.1016/j.solmat.2013.08.006 ↗
19. Simple experimental test to distinguish extraction and injection barriers at the electrodes of (organic) solar cells with S-shaped current-voltage characteristics10.1016/j.solmat.2013.07.014 ↗
20. A Nonfullerene small MoleculeAcceptor with 3D Interlocking geometry Enabling Efficient organic solar cells10.1002/adma.201504010 ↗
21. Rigidifying Nonplanar Perylene Diimides by Ring Fusion Toward Geometry‐Tunable Acceptors for High‐Performance Fullerene‐Free Solar Cells10.1002/adma.201504120 ↗
22. A Tetraphenylethylene core‐based 3D structure small Molecular Acceptor Enabling Efficient non‐Fullerene organic solar cells10.1002/adma.201404152 ↗
23. Influence of molecular geometry of perylene diimide dimers and polymers on bulk heterojunction morphology toward high‐performance nonfullerene polymer solar cells10.1002/adfm.201501971 ↗
24. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
25. Organic photovoltaics: technology and market10.1016/j.solmat.2004.02.030 ↗
26. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
27. Polymer solar cells: recent development and possible routes for improvement in the performance10.1016/j.solmat.2009.10.005 ↗
28. A brief history of the development of organic and polymeric photovoltaics10.1016/j.solmat.2004.02.021 ↗
29. Data on the detail information of influence of substrate temperature on the film morphology and photovoltaic performance of non-fullerene organic solar cells10.1016/j.dib.2017.07.065 ↗
30. A 1, 8-naphthalimide based small molecular acceptor for polymer solar cells with high open circuit voltage10.1039/C5TC01148E ↗
31. A nonfullerene acceptor for wide band gap polymer based organic solar cells10.1039/C5CC08023A ↗
32. 1, 8-Naphthalimide-based planar small molecular acceptor for organic solar cells10.1021/acsami.5b10211 ↗
33. A high efficiency Nonfullerene organic solar cell with optimized crystalline organizations10.1002/adma.201504091 ↗
34. Perylene–Diimide based non-fullerene solar cells with 4.34% efficiency through engineering surface donor/acceptor compositions10.1021/cm5006339 ↗
35. Halogen substitution effects on the molecular packing and thin film transistor performances of carbazoledioxazine derivatives10.1021/acs.jpcc.6b09888 ↗
36. Surface plasmonic effects of metallic nanoparticles on the performance of polymer bulk heterojunction solar cells10.1021/nn102295p ↗
37. Device physics of polymer: fullerene bulk heterojunction solar cells10.1002/adma.200601093 ↗
38. Fill factor in organic solar cells10.1039/c3cp51383a ↗
39. Correlation between oxidation potential and open-circuit voltage of composite solar cells based on blends of polythiophenes/fullerene derivative10.1063/1.1650878 ↗
40. 1, 8-Naphthalimide-based nonfullerene acceptors for wide optical band gap polymer solar cells with an ultrathin active layer thickness of 35 nm10.1039/C6TC01438K ↗
41. High performance all‐polymer solar cell via polymer side‐chain engineering10.1002/adma.201306242 ↗
42. From binary to ternary solvent: morphology fine‐tuning of D/A blends in PDPP3T‐based polymer solar cells10.1002/adma.201202855 ↗