journal article·2016-12Open access

Dislocation-limited performance of advanced solar cells determined by TCAD modeling

David Berney Needleman, Hannes Wagner, Pietro P. Altermatt, Zhen Xiong, Pierre J. Verlinden, Tonio Buonassisi

Abstract

Abstract In recent years, low-cost silicon for photovoltaic applications has trended toward smaller grain sizes with lower dislocation densities. These changes, coupled with advanced device architectures like heterojunction and passivated emitter and rear cells, have enabled higher efficiencies, including new world records. To establish material requirements for further improvement, we model dislocations with different recombination strengths in Sentaurus Device using mid-gap defects spatially localized at the nanoscale in three dimensions. This approach accounts for the charging of dislocations and differentiates between dislocations and grain boundaries or metal impurities. Simulations that model dislocations as macroscopic variations in effective bulk lifetime or diode parameters do not address these issues. We validate our model by simulating the world record multicrystalline silicon solar cell. We find that three parameters influence cell efficiency: the area fraction of the cell containing dislocations, the dislocation density within defect clusters, and the concentration of recombination centers at these dislocations. We provide targets for these parameters and show how our results can be used to determine the potential gains from reducing dislocations in experimental devices and materials. We further predict that device architectures that lead to higher injection, such as silicon heterojunction cells, are more robust to the presence of dislocations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Chemistry and physics of segregation of impurities at extended defects in silicon10.1002/(SICI)1521-396X(199901)171:1<123::AID-PSSA123>3.0.CO;2-H ↗
2. Gettering of transition metal impurities during phosphorus emitter diffusion in multicrystalline silicon solar cell processing10.1063/1.2194387 ↗
3. High-efficiency solar cells on phosphorus gettered multicrystalline silicon substrates10.1002/pip.736 ↗
4. Precipitates and hydrogen passivation at crystal defects in n- and p-type multicrystalline silicon10.1063/1.2800271 ↗
5. Luminescence imaging for inline characterisation in silicon photovoltaics10.1002/pssr.201084028 ↗
6. Recombination in ingot cast silicon solar cells10.1002/pssa.201084022 ↗
7. Development of high-performance multicrystalline silicon for photovoltaic industry10.1002/pip.2437 ↗
8. Potential gain in multicrystalline silicon solar efficiency by n-Type doping10.1109/JPHOTOV.2014.2377554 ↗
9. Identification of the most relevant metal impurities in mc n-type silicon for solar cells10.1016/j.solmat.2015.06.028 ↗
10. Characterization of defects in mono-like silicon wafers and their effects on solar cell efficiency10.1016/j.solmat.2013.09.020 ↗
11. Comparison of defect formations in solar silicon growth from small random and large oriented seeds10.1016/j.jcrysgro.2015.02.087 ↗
12. High efficiency heterojunction solar cells on n-type kerfless mono crystalline silicon wafers by epitaxial growth10.1063/1.4922196 ↗
13. A simple criterion for predicting multicrystalline Si solar cell performance from lifetime images of wafers prior to cell production10.1063/1.4817272 ↗
14. Sensitivity analysis of industrial multicrystalline PERC silicon solar cells by means of 3-D device simulation and metamodeling10.1109/JPHOTOV.2013.2287753 ↗
15. Assessing the device-performance impacts of structural defects with TCAD modeling10.1016/j.egypro.2015.07.003 ↗
16. Two types of electron-beam-induced current behaviour of misfit dislocations in Si (Ge): experimental observations and modelling10.1016/0921-5107(94)90302-6 ↗
17. Recombination activity of contaminated dislocations in silicon: A model describing electron-beam-induced current contrast behavior10.1103/PhysRevB.63.115208 ↗
18. Spatially resolved modeling of the combined effect of dislocations and grain boundaries on minority carrier lifetime in multicrystalline silicon10.1063/1.2435815 ↗
19. Sentaurus Device User Guide, Synopsys, 2013.
20. Three-dimensional TCAD modeling of grain boundaries in high-efficiency silicon solar cells
21. A numerical simulation study of gallium-phosphide/silicon heterojunction passivated emitter and rear solar cells10.1063/1.4863464 ↗
22. Residual stress and dislocations density in silicon ribbons grown via optical zone melting10.1063/1.4793319 ↗
23. Effective lifetimes exceeding 300μs in gettered p-type epitaxial kerfless silicon for photovoltaics10.1063/1.4844915 ↗
24. R. Hao, T. s. Ravi, V. Siva, J. Vatus, D. Miller, J. Custodio, K. Moyers, High quality kerfless silicon mono-crystalline wafers and cells by high throughput epitaxial growth, in: Symposium – Film-Silicon Science Technology, 2014, p. mrss14–1666-a05–01 (11 pages). 〈http://dx.doi.org/10.1557/opl.2014.716〉.10.1557/opl.2014.716 ↗
25. N. Stoddard, B. Gründig-Wendrock, A. Krause, D. Oriwol, M. Bertoni, T.U. Naerland, I. Witting, L. Sylla, On the potential and limits of large area seeding for photovoltaic silicon, J. Cryst. Growth. (n.d.). 〈http://dx.doi.org/10.1016/j.jcrysgro.2016.04.056〉.10.1016/j.jcrysgro.2016.04.056 ↗
26. Minority-carrier lifetime and defect content of n-type silicon grown by the noncontact crucible method10.1016/j.jcrysgro.2014.08.021 ↗
27. Shape and quality of Si single bulk crystals grown inside Si melts using the noncontact crucible method10.7567/JJAP.54.015504 ↗
28. J. Wong, Griddler: Intelligent computer aided design of complex solar cell metallization patterns, in: Proceedings of the 39th IEEE Photovoltaic Specialists Conference PVSC, 2013, pp. 0933–0938. 〈http://dx.doi.org/10.1109/PVSC.2013.6744296〉.10.1109/PVSC.2013.6744296 ↗
29. H. Haug, M.S. Wiig, R. Søndenå, J. Wong, Simulating the effect of lifetime non-uniformity on solar cell performance using cmd-PC1D 6 and Griddler 2, Energy Procedia (under review).
30. Defect Clusters in Silicon: Impact on the Performance of Large-Area Devices10.4028/www.scientific.net/MSF.258-263.527 ↗
31. B. Sopori, V. Budhraja, P. Rupnowski, S. Johnston, N. Call, H. Moutinho, M. Al-Jassim, Defect clusters in multicrystalline silicon: Their nature and influence on the solar cell performance, in: 34th IEEE Photovoltaic Specialists Conference PVSC, 2009, pp. 1969–1974. 〈http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=5411527〉, (accessed 16.08.13).10.1109/PVSC.2009.5411527 ↗
32. Fabrication of diode arrays for photovoltaic characterization of silicon substrates10.1063/1.99027 ↗
33. Solar cell efficiency tables (version 47)10.1002/pip.2728 ↗
34. W. Deng, F. Ye, Z. Xiong, D. Chen, W. Guo, Y. Chen, Y. Yang, P.P. Altermatt, Z. Feng, P.J. Verlinden, Development of high-efficiency industrial p-type multi-crystalline PERC solar cells with efficiency greater than 21%, Energy Procedia (under review).
35. Rapid dislocation-density mapping of as-cut crystalline silicon wafers10.1002/pssr.201308150 ↗
36. High-efficiency crystalline silicon solar cells: status and perspectives10.1039/C5EE03380B ↗
37. P.J. Verlinden, Mass production of high efficiency p-type PERC solar cell: how high can we go?, presentation given at the IEEE Photovoltaics Specialists Conference on June 9, 2016