Effect of asymmetric solubility of diketopyrrolopyrrole-based polymers and PC71BMs in a binary solvent system on the performance of bulk heterojunction solar cells
Source abstract
Abstract
In this study, we demonstrated the effective morphological control of polymer:fullerene blends using three separate solvent systems: chloroform (CF), CF:1,8-diiodooctane (DIO), and CF:o-dichlorobenzene (ODCB). The polymer:fullerene blends are composed of two diketopyrrolopyrrole (DPP)-based polymers of P(DPP-alt-QT) and P(DPP-alt-DTBSe) and a fullerene derivative of [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM), i.e., P(DPP-alt-QT):PC71BM or P(DPP-alt-DTBSe):PC71BM. The CF:ODCB binary solvent exhibited the best photovoltaic performance among the three solvent systems for both polymer-based devices, although the CF:DIO also exhibited an improved performance compared to the CF system. By examining film morphology of the blend films, we found that the CF:ODCB enabled the most optimal nanoscale phase separation and the morphological features were strongly affected by the solubility of each material in the high boiling-point (BP) solvent. Specifically, the polymers have limited but slightly higher solubility in ODCB than in DIO, while the PC71BM molecules have a high solubility in both DIO and ODCB. Therefore, this work highlights that the optimally asymmetric solubility of each photoactive component in the high BP solvent is a critical factor to form the nanoscale, bicontinuous domains in the blend films and thereby to determine the performance of photovoltaic devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. The path to ubiquitous and low-cost organic electronic appliances on plastic10.1038/nature02498 ↗
2. Polymer solar cells10.1038/nphoton.2012.11 ↗
3. Polymer–fullerene composite solar cells10.1002/anie.200702506 ↗
4. Solution-processed flexible polymer solar cells with silver nanowire electrodes10.1021/am2009585 ↗
5. Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices10.1021/ar900061z ↗
6. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
7. Conjugated polymer photovoltaic materials with broad absorption band and high charge carrier mobility10.1002/adma.200800606 ↗
8. Silver front electrode grids for ITO-free all printed polymer solar cells with embedded and raised topographies, prepared by thermal imprint, flexographic and inkjet roll-to-roll processes10.1039/c2nr31508d ↗
9. Roll-to-roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
10. It is all in the pattern – high-efficiency power extraction from polymer solar cells through high-voltage serial connection10.1002/ente.201200055 ↗
11. Fast inline roll-to-roll printing for indium-tin-oxide-free polymer solar cells using automatic registration10.1002/ente.201200029 ↗
12. Freely available opv – the fast way to progress10.1002/ente.201300057 ↗
13. 25th Anniversary article: rise to power – opv-based solar parks10.1002/adma.201302031 ↗
14. Systematic investigation of benzodithiophene- and diketopyrrolopyrrole-based low-bandgap polymers designed for single junction and tandem polymer solar cells10.1021/ja301460s ↗
15. Overcoming efficiency challenges in organic solar cells: rational development of conjugated polymers10.1039/c2ee21608f ↗
16. Replacing alkoxy groups with alkylthienyl groups: a feasible approach to improve the properties of photovoltaic polymers10.1002/anie.201103313 ↗
17. Outlook brightens for plastic solar cells10.1126/science.332.6027.293 ↗
18. High efficiency polymer solar cells with long operating lifetimes10.1002/aenm.201100138 ↗
19. Effect of annealing on P3HT:PCBM charge transfer and nanoscale morphology probed by ultrafast spectroscopy10.1021/nl9038289 ↗
20. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
21. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
22. Post-deposition treatment of an arylated-carbazole conjugated polymer for solar cell fabrication10.1002/adma.201201567 ↗
23. Efficient solar cells based on an easily accessible diketopyrrolopyrrole polymer10.1002/adma.201001449 ↗
24. Incorporation of furan into low band-gap polymers for efficient solar cells10.1021/ja108115y ↗
25. Narrow-bandgap diketo-pyrrolo-pyrrole polymer solar cells: the effect of processing on the performance10.1002/adma.200800456 ↗
26. Efficient polymer solar cells based on a low bandgap semi-crystalline DPP polymer-PCBM blends10.1002/adma.201200902 ↗
27. Poly(diketopyrrolopyrrole–terthiophene) for ambipolar logic and photovoltaics10.1021/ja907506r ↗
28. Band gap control in diketopyrrolopyrrole-based polymer solar cells using electron donating side chains10.1002/aenm.201200950 ↗
29. From binary to ternary solvent: morphology fine-tuning of D/A blends in PDPP3T-based polymer solar cells10.1002/adma.201202855 ↗
30. Enhanced photovoltaic performance of diketopyrrolopyrrole (DPP)-based polymers with extended π conjugation10.1021/jp312450p ↗
31. Processing additives for improved efficiency from bulk heterojunction solar cells10.1021/ja710079w ↗
32. The effect of additive on performance and shelf-stability of HSX-1/PCBM photovoltaic devices10.1016/j.orgel.2011.05.028 ↗
33. A high mobility conjugated polymer based on dithienothiophene and diketopyrrolopyrrole for organic photovoltaics10.1039/c2ee21149a ↗
34. Effect of annealing solvent solubility on the performance of poly(3-hexylthiophene)/methanofullerene solar cells10.1021/jp9029562 ↗
35. 2,5-bis(2-octyldodecyl)pyrrolo[3,4-c]pyrrole-1,4-(2H,5H)-dione-based donor–acceptor alternating copolymer bearing 5,5׳-di(thiophen-2-yl)-2,2׳-biselenophene exhibiting 1.5cm2V–1s–1 hole mobility in thin-film transistors10.1021/ja203189h ↗
36. Space-charge-limited current fluctuations in organic semiconductors10.1103/PhysRevLett.95.236601 ↗
37. Molecular-weight-dependent mobilities in regioregular poly(3-hexyl-thiophene) diodes10.1063/1.1891301 ↗
38. Transient photovoltage and dark current analysis on enhanced open-circuit voltage of polymer solar cells with hole blocking tio2 nanoparticle interfacial layer10.1016/j.orgel.2013.04.016 ↗
39. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
40. New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer10.1002/adma.200501825 ↗
41. Molecular weight effect on the absorption, charge carrier mobility, and photovoltaic performance of an indacenodiselenophene-based ladder-type polymer10.1021/cm401586t ↗
42. Streamlined microwave-assisted preparation of narrow-bandgap conjugated polymers for high-performance bulk heterojunction solar cells10.1038/nchem.403 ↗
43. Efficient methano[70]fullerene/MDMO-ppv bulk heterojunction photovoltaic cells10.1002/anie.200351647 ↗
44. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
45. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
46. Effect of selenophene in a dpp copolymer incorporating a vinyl group for high-performance organic field-effect transistors10.1002/adma.201202867 ↗
47. A selenophene-based low-bandgap donor–acceptor polymer leading to fast ambipolar logic10.1002/adma.201104522 ↗
48. Dithienogermole as a fused electron donor in bulk heterojunction solar cells10.1021/ja204056m ↗
49. Nanoscale morphology of conjugated polymer/fullerene-based bulk-heterojunction solar cells10.1002/adfm.200305026 ↗