journal article·2012-12

Glass transition temperature as an in situ cure index of electrically conductive adhesives in solar photovoltaic module interconnect assemblies

Dakai Ren, Michael Mills, Marty DeGroot, Lindsey Clark, Shawn Brown, James Curphy

Publisher page

Abstract

Abstract Electrically conductive adhesives (ECAs) offer a low-temperature alternative to solder processes for interconnection of photovoltaic cells. The curing conversion of the ECA bond can significantly influence its mechanical performance and electrical conductivity. This study developed a method to measure ECA curing conversion in situ of interconnected solar cell assemblies. First, the relationship between the glass transition temperature ( T g ) and the curing conversion was established using neat ECA specimens that were pre-cured to different degrees. Then, the torsional dynamic mechanical analysis (DMA) was used to measure the T g of the actual ECA bond in the cell interconnect assemblies. Finally, the in situ curing conversion of the ECA bond was estimated through the T g –conversion relationship. Regardless of the extremely high silver filler content (>70 wt%) in a typical ECA and little material available in the actual bondline (∼10 vol%), this method provided high sensitivity and ease of implementation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Electrical reliability of electrically conductive adhesive joints: dependence on curing condition and current density10.1016/S0026-2692(01)00007-6 ↗
2. Reliability investigations on conductive adhesive joints with emphasis on the mechanics of the conduction mechanism10.1109/6144.868845 ↗
3. Determination and review of specific heat capacity measurements during isothermal cure of an epoxy using TM-DSC and standard DSC techniques10.1016/j.polymertesting.2010.04.004 ↗
4. DSC study on the effect of cure reagents on the lignin base epoxy cure reaction10.1002/app.26196 ↗
5. Cure kinetic study of carbon nanofibers/epoxy composites by isothermal DSC10.1002/app.21415 ↗
6. Cure characterization of epoxy and polyester clear powder coatings using Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Thermal Analysis (DMTA)10.1016/j.porgcoat.2005.06.006 ↗
7. Glass transition temperature as a function of conversion in thermosetting polymers10.1021/ma00009a072 ↗
8. In situ FTIR and DSC investigation on cure reaction of liquid aromatic dicyanate ester with different types of epoxy resin10.1002/1099-0518(20000815)38:16<2934::AID-POLA110>3.0.CO;2-B ↗
9. The determination of the degree of cure in epoxy paints by infrared spectroscopy10.1016/j.polymertesting.2005.02.013 ↗
10. Quantitative analysis of epoxy resin cure reaction: a study by near-infrared spectroscopy10.1366/00037020260377706 ↗
11. Effect of cross-links on the glass transition temperature of end-linked elastomers10.1021/ma00041a028 ↗
12. Thermosetting cure diagrams: calculation and application10.1002/app.1994.070530601 ↗
13. Modeling the evolution of the dynamic mechanical properties of a commercial epoxy during cure after gelation10.1002/(SICI)1097-4628(20000425)76:4<495::AID-APP7>3.0.CO;2-B ↗
14. Influence of curing modes on crosslink density in polymer structures10.1016/j.jdent.2004.01.012 ↗
15. A generalized theory for the glass transition temperature of crosslinked and uncrosslinked polymers10.1002/polb.1990.090280906 ↗