journal article·2015-06

A new anodic buffer layer material for non-mixed planar heterojunction chloroboron subphthalocyanine organic photovoltaic achieving 96% internal quantum efficiency

Chi-Feng Lin, Shun-Wei Liu, Chih-Chien Lee, Takeaki Sakurai, Masato Kubota, Wei-Cheng Su, Jia-Cing Huang, Tien-Lung Chiu, Hsieh-Cheng Han, Li-Chyong Chen, Chin-Ti Chen, Jiun-Haw Lee

Publisher page

Abstract

Abstract Nonmixed planar heterojunction (PHJ) small-molecule organic photovoltaics (OPVs) with 96% internal quantum efficiency (at 595 nm) and 4.77% power conversion efficiency (PCE) have been demonstrated. In addition to boron subphthalocyanine chloride (SubPc) and C60 as electron donor and acceptor materials, respectively, PHJ OPVs contain an ultrathin (2 nm) buffer layer of bis-(naphthylphenylaminophenyl)fumaronitrile (NPAFN) between the indium tin oxide (ITO) anode and the donor layer (SubPc). Compared with copper phthalocyanine (CuPc) or α-naphthylphenylbiphenyl diamine (NPB) buffer layers, the NPAFN buffer layer blocks the exciton diffusion from the SubPc electron donor layer to the ITO anode more effectively and considerably improves the short circuit current (JSC) from 5.96 (without an NPAFN layer) to 7.70 mA/cm2 (with a 4-mm-thick NPAFN layer ). In addition, experimental results indicated that the NPAFN buffer layer reduces the crystallization, or stacking, of the SubPc electron donor, thereby limiting the reverse saturation current and elevating the open circuit voltage (VOC) from 1.01 (without an NPAFN layer) to 1.08 V (with a-2-nm thick NPAFN layer). However, series resistance (RS) of the OPV monotonically increases with increasing NPAFN layer thickness. The performance of the OPV is optimized when the NPAFN buffer layer thickness is 2 nm. Compared with a SubPc–C60 PHJ OPV without an NPAFN buffer layer, the PCE of a OPV with a buffer layer increases by 22% from 3.96% to 4.77%, with a concurrent increase in JSC (from 5.96 to 7.02 mA/cm2) and VOC (from 1.01 to 1.08 V). However, a decrease in RS (from 10.21 to 14.95 Ω cm2) and in fill factor (from 65% to 63%) is also observed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Simple roll coater with variable coating and temperature control for printed polymer solar cells10.1016/j.solmat.2011.08.027 ↗
2. Manufacture and demonstration of organic photovoltaic-powered electrochromic displays using roll coating methods and printable electrolytes10.1002/polb.23038 ↗
3. Recent progress and future aspects of organic solar cells10.1002/pip.1141 ↗
4. Factors limiting device efficiency in organic photovoltaics10.1002/adma.201202873 ↗
5. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
6. Systematic investigation of benzodithiophene- and diketopyrrolopyrrole-based low-bandgap polymers designed for single junction and tandem polymer solar cells10.1021/ja301460s ↗
7. Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer10.1038/nphoton.2011.356 ↗
8. Dual plasmonic nanostructures for high performance inverted organic solar cells10.1002/adma.201200120 ↗
9. Nanoscale phase separation and high photovoltaic efficiency in solution – processed, small – molecule bulk heterojunction solar cells10.1002/adfm.200900832 ↗
10. Conjugated polymer nanostructures for organic solar cell applications10.1039/c1py00275a ↗
11. The limits to organic photovoltaic cell efficiency10.1557/mrs2005.5 ↗
12. Enhanced open-circuit voltage in subphthalocyanine–C60 organic photovoltaic cells
13. Near-infrared sensitive small molecule organic photovoltaic cells based on chloroaluminum phthalocyanine10.1063/1.2752992 ↗
14. Electro-optical study of subphthalocyanine in a bilayer organic solar cell10.1002/adfm.200700398 ↗
15. Improved efficiency of zinc phthalocyanine/C60 based photovoltaic cells via nanoscale interface modification10.1063/1.2739364 ↗
16. Organic solar cells with sensitivity extending into the near infrared10.1063/1.2140075 ↗
17. A comparative study on the performances of small molecule organic solar cells based on CuPc/C60 and CuPc/C7010.1016/j.solmat.2010.08.008 ↗
18. Efficient planar organic solar cells with the high near-infrared response10.1016/j.orgel.2012.03.002 ↗
19. 8.4% Efficient fullerene-free organic solar cells exploiting long-range exciton energy transfer10.1038/ncomms4406 ↗
20. The impact of molecular orientation on the photovoltaic properties of a phthalocyanine/fullerene heterojunction10.1002/adfm.201200512 ↗
21. Charge carrier mobility in fluorinated phenoxy boron subphthalocyanines: role of solid state packing10.1021/cg2015385 ↗
22. Open-circuit voltage and efficiency improvement of subphthalocyanine-based organic photovoltaic device through deposition rate control10.1016/j.solmat.2012.04.005 ↗
23. High performance organic photovoltaic devices using amorphous molecular materials with high charge–carrier drift mobilities10.1063/1.3079399 ↗
24. High-performance organic photovoltaic devices using a new amorphous molecular material with high hole drift mobility, Tris[4-(5-phenylthiophen-2-yl)phenyl]amine10.1002/adfm.200901259 ↗
25. A solution-processable star-shaped molecule for high-performance organic solar cells10.1002/adma.201004445 ↗
26. Effect of the highest occupied molecular orbital energy level offset on organic heterojunction photovoltaic cells10.1063/1.3491214 ↗
27. Efficient organic photovoltaic cells based on nanocrystalline mixtures of boron subphthalocyanine chloride and C6010.1002/adfm.201101948 ↗
28. Graded donor–acceptor heterojunctions for efficient organic photovoltaic cells10.1002/adma.201002454 ↗
29. Efficient solar cells using all-organic nanocrystalline networks10.1002/adma.200700837 ↗
30. Fill factor in organic solar cells10.1016/j.solmat.2008.06.001 ↗
31. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
32. Heterojunction topology versus fill factor correlations in novel hybrid small-molecular/polymeric solar cells10.1063/1.3077007 ↗
33. Controlled growth of a molecular bulk heterojunction photovoltaic cell10.1038/nmat1285 ↗
34. Very-high-efficiency double-heterostructure copper phthalocyanine C60 photovoltaic cells10.1063/1.1384001 ↗
35. Efficient thin-film organic solar cells based on pentacene/C60 heterojunctions10.1063/1.1829777 ↗
36. Effect of molecular packing on the exciton diffusion length in organic solar cells10.1063/1.2783202 ↗
37. High fill factor and open circuit voltage in organic photovoltaic cells with diindenoperylene as donor material10.1002/adfm.201001028 ↗
38. Efficient photon harvesting at high optical intensities in ultrathin organic double-heterostructure photovoltaic diodes10.1063/1.126433 ↗
39. Improvement of photovoltaic performances of organic thin-film solar cells by fast electron mobility oxadiazole as an exciton blocking layer material10.1002/pssa.200723290 ↗
40. The effects of exciton–diffusion blocking layers on pentacene/C60 bulk heterojunction solar cells10.1016/j.jpcs.2009.11.006 ↗
41. Organic photovoltaics incorporating electron conducting exciton blocking layers10.1063/1.3598426 ↗
42. Enhancement in open circuit voltage through a cascade-type energy band structure10.1063/1.2817935 ↗
43. Influence of the highest occupied molecular orbital energy level of the donor material on the effectiveness of the anode buffer layer in organic solar cells10.1002/pssa.201127047 ↗
44. Improved the efficiency of small molecule organic solar cell by double anode buffer layers10.1016/j.solmat.2011.08.006 ↗
45. Cascade organic solar cells10.1021/cm200525h ↗
46. Organic solar cells employing electrodeposited nickel oxide nanostructures as the anode buffer layer10.1016/j.solmat.2012.01.041 ↗
47. Effect of MoO3 as an interlayer on the performance of organic solar cells based on ZnPc and C6010.1016/j.synthmet.2011.10.014 ↗
48. The influence of a PEDOT: PSS layer on the efficiency of a polymer light-emitting diode10.1016/j.orgel.2003.08.007 ↗
49. Fluorescence and electroluminescence quenching evidence of interfacial charge transfer in poly(3-hexylthiophene): graphene oxide bulk heterojunction photovoltaic devices10.1021/nn1022457 ↗
50. Small molecular organic photovoltaic cells with exciton blocking layer at anode interface for improved device performance10.1063/1.3650472 ↗
51. Recovering lost excitons in organic photovoltaics using a transparent dissociation layer10.1063/1.4807416 ↗
52. Comparison of short and long wavelength absorption electron donor materials in C60-based planar heterojunction organic photovoltaics10.1016/j.orgel.2012.06.006 ↗
53. Liu · State Lett. · 2012 · 1 · 7010.1149/2.002205ssl ↗
54. Two layer organic photovoltaic cell
55. Hole mobility of N,N′-bis(naphthalen-1-yl)-N,N′-bis(phenyl)benzidine investigated by using space–charge-limited currents
56. Low driving voltage and high stability organic light-emitting diodes with rhenium oxide-doped hole transporting layer10.1063/1.2754635 ↗
57. Open-circuit voltage dependency on hole-extraction layers in planar heterojunction organic solar cells10.1063/1.3610962 ↗
58. Influence of 3, 4, 9, 10-perylene tetracarboxylic dianhydride intermediate layer on molecular orientation of phthalocyanine10.1143/JJAP.44.1982 ↗
59. Cathode dependence of the open-circuit voltage of polymer: fullerene bulk heterojunction solar cells10.1063/1.1620683 ↗
60. Origin of the open circuit voltage of plastic solar cells10.1002/1616-3028(200110)11:5<374::AID-ADFM374>3.0.CO;2-W ↗
61. Limits of open circuit voltage in organic photovoltaic devices10.1063/1.3360336 ↗
62. Molecular and morphological influences on the open circuit voltages of organic photovoltaic devices10.1021/ja9007722 ↗
63. Open circuit voltage enhancement due to reduced dark current in small molecule photovoltaic cells10.1063/1.3072807 ↗
64. Boron subphthalocyanine chloride as an electron acceptor for high-voltage fullerene-free organic photovoltaics10.1002/adfm.201101782 ↗