journal article·2021-05

High-temperature solar-selective coatings based on Cr(Al)N. Part 1: Microstructure and optical properties of CrNy and Cr1-xAlxNy films prepared by DC/HiPIMS

T.C. Rojas, A. Caro, G. Lozano, J.C. Sánchez-López

Publisher page

Abstract

In order to explore the potentialities of Cr(Al)N materials in multilayer-based solar selective coatings (SSC) for high temperature applications (T > 500 °C), the optical behavior of Cr(Al)N films is studied in this work. Two sets of layers (CrN and CrAlN) were prepared by direct current (DC) and high-power impulse magnetron sputtering (HiPIMS) technology. The deposition parameters: N flux, HiPIMS frequency and aluminum sputtering power, were modified to get a wide variety of stoichiometries. The composition, morphology, phases and electronic structure of the films were characterized in depth. The optical behavior was determined by UV–Vis–NIR and FTIR spectroscopies, and the optical constants were obtained from the measured transmittance and reflectance spectra based on appropriate dielectric function models. Our results indicate that small changes in the layer composition influence the optical constants. In particular, a metallic-like behavior was obtained for CrN layers with N vacancies (CrN and CrN films) while a semiconductor-like behavior was observed for CrN. Thus, the CrN films can be used as effective absorber layer in multilayer-based SSC, and namely, the CrN film as an IR reflector/absorber layer too. Likewise, the optical properties of CrAlN layers can also be tuned from metallic to semiconductor-like behavior depending on the chemical composition. Indeed, the absorption coefficients of CrAlN films with optimized Al content and N-vacancies are comparable to those reported for state-of-the-art materials such as TiAlN or TiAlCrN. In addition, a CrAlN film was found to be a suitable IR reflector/absorber layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · solar cell performance optimization · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Concentrating solar power10.1021/acs.chemrev.5b00397 ↗
2. Coatings for concentrating solar systems-A review10.1016/j.rser.2015.01.015 ↗
3. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
4. Optical properties of (Oxy) nitride materials: a review10.1111/jace.12197 ↗
5. Functional multi-layer nitride coatings for high temperature solar selective applications10.1016/j.solmat.2013.10.024 ↗
6. Control of optical properties of TiNxOy films and application for high performance solar selective absorbing coatings10.1364/OME.4.001833 ↗
7. Structural and optical properties of titanium aluminum nitride films (Ti1-xAlxN)10.1116/1.1359532 ↗
8. Optical properties of TixAl1-xN thin films in the whole compositional range10.1016/j.surfcoat.2015.08.049 ↗
9. Insights into the atomic and electronic structure triggered by ordered nitrogen vacancies in CrN
10. Electrical, optical and mechanical properties of sputtered CrNy and Cr1-xSixN1.02 thin films10.1016/S0040-6090(03)01113-1 ↗
11. Characterization of Ti1-xAlxN coatings with selective IR reflectivity10.1016/j.solener.2010.04.021 ↗
12. Design of high-temperature solar-selective coatings based on aluminium titanium oxynitrides AlyTi1-y(OxN1-x). Part 1: advanced microstructural and optical simulation10.1016/j.solmat.2017.10.015 ↗
13. Electrical and optical properties of Zr1-xAlxN thin films10.1016/j.tsf.2004.10.049 ↗
14. Structure, hardness and thermal stability of TiAlN and nanolayered TiAlN/CrN multilayers10.1016/j.vacuum.2004.08.020 ↗
15. TiAlN/TiAlON/Si3N4 tandem absorber for high temperature solar selective applications10.1063/1.2387897 ↗
16. Optical properties and thermal stability of TiAlN/AlON tandem absorber prepared by reactive DC/RF magnetron sputtering10.1016/j.solmat.2008.06.004 ↗
17. Optical characterization of TiAlN/TiAlON/SiO2 absorber for solar selective applications10.1016/j.surfcoat.2011.09.003 ↗
18. Design of high-temperature solar-selective coatings based on aluminium titanium oxynitrides AlyTi1-y(OxN1-x). Part 2: experimental validation and durability tests at high temperature10.1016/j.solmat.2018.04.027 ↗
19. Optical characterization of TiAlNx/TiAlNy/Al2O3 tandem solar selective absorber coatings10.1016/j.solmat.2017.06.007 ↗
20. Chemical bonding states and solar selective characteristics of unbalanced magnetron sputtered TixM1-x-yNy films10.1039/C6RA02550A ↗
21. High temperature optically stable spectrally-selective Ti1-xAlxN-based multilayer coating for concentrated solar thermal applications10.1016/j.solmat.2019.109964 ↗
22. Mechanical behavior and oxidation resistance of Cr(Al)N coatings10.1116/1.1946711 ↗
23. Role of Y in the oxidation resistance of CrAlYN coatings10.1016/j.apsusc.2015.06.099 ↗
24. Microstructure, optical and electrical properties of CrAlN film as a novel material for high temperature solar selective absorber application10.1016/j.matlet.2014.06.159 ↗
25. The effect of increasing Si content in the absorber layers (CrAlSiNx/CrAlSiOyNx) of solar selective absorbers upon their selectivity and thermal stability10.1016/j.apsusc.2019.03.208 ↗
26. Spectroscopic ellipsometry measurements of chromium nitride coatings10.1116/1.1405513 ↗
27. The effect of crystal structure and morphology on the optical properties of chromium nitride thin films10.1016/j.surfcoat.2003.10.108 ↗
28. Structural, optical and electrical properties of reactively sputtered CrNy films: nitrogen influence on the phase formation10.2298/PAC1701045N ↗
29. Structural, morphological, and optical characterizations of Mo, CrN and Mo:CrN sputtered coatings for potential solar selective applications10.1016/j.apsusc.2018.01.267 ↗
30. Tailoring CrNx stoichiometry and functionality by means of reactive HiPIMS10.1016/j.surfcoat.2020.126235 ↗
31. Accelerator-based research activities at "Centro Nacional de Aceleradores", Seville (Spain)10.1016/j.nimb.2008.02.080 ↗
32. Microstructure and thermoelectric properties of CrN and CrN/Cr2N thing films10.1088/1361-6463/aad2ef ↗
33. Egerton · 1986
34. The electron energy-loss near-edge structure (ELNES) on the NK-edges from the transition metal mononitrides with the rock-salt structure and its comparison with that on the C K-edges from the corresponding transition metal monocarbides10.1111/j.1365-2818.1995.tb03684.x ↗
35. Study of the L2,3 edges in the 3d transition metals and their oxides by electron-energy-loss spectroscopy with comparisons to theory10.1103/PhysRevB.26.614 ↗
36. Electron energy loss-near edge structure as fingerprint for identifying chromium nitrides10.1016/j.ssc.2004.01.045 ↗
37. ELNES in metal nitrides
38. Electron energy loss near edge structure on the nitrogen K-edge in vanadium nitrides10.1046/j.1365-2818.2001.00946.x ↗
39. Measurements of 3d state occupancy in transition metals using electron energy-loss spectrometry10.1063/1.100457 ↗
40. Electron energy loss spectroscopy of nano-scale CrAlYN/CrN- CrAlY(O)N/Cr(O)N multilayer coatings deposited by unbalance magnetron sputtering10.1016/j.tsf.2010.03.012 ↗
41. A nanoscale characterization with electron microscopy of multilayered CrAlYN coatings: a singular functional nanostructure10.1017/S1431927613013962 ↗
42. High-temperature solar-selective coatings based on Cr(Al)N. Part 2: design, spectral properties and thermal stability of multilayer stacks10.1016/j.solmat.2020.110812 ↗