journal article·2013-10

Mass production of high efficiency selective emitter crystalline silicon solar cells employing phosphorus ink technology

Sihua Zhong, Wenzhong Shen, Feng Liu, Xiang Li

Publisher page

Abstract

Phosphorus ink technology has been demonstrated as a simple and cheap method to realize selective emitter (SE) crystalline silicon solar cells through mass production in a professional photovoltaic company. We have achieved an average conversion efficiency (η) of 19.01% with peak η of 19.27% for the SE solar cells based on commercial-grade p-type silicon substrate, much higher than that of the homogeneous emitter counterparts whose average η is 18.56%. The standard deviation of the perfor- mance for these SE solar cells is also smaller, indicating better repeatability of the phosphorus ink SE technology. Moreover, the SE silicon solar cells can well adapt to various Ag pastes while preserving high cell performance, which offers an opportunity to choose a cheap Ag paste as front metallization material. With the aid of PC1D, we have shown that the η of the SE solar cells can be further improved as the sheet resistance in the illuminated area increases from the present value of 70 to 120 Ω/□.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Status of selective emitters for p-type c-Si solar cells10.4236/opj.2012.22018 ↗
2. A.K. Volk, U. Jaeger, J. Rentsch, R. Preu, A novel approach for mask-free selective emitter technology combining laser doping and wet chemical etch back, in: Proceedings of the 26th European PVSEC, 2011, pp. 884–889.
3. D. Rudolph, K. Peter, A. Meijer, O. Doll, I. Kohler, Etch back selective emitter process with single POCl3 diffusion, in: Proceedings of the 26th European PVSEC, 2011, pp. 1349–1352.
4. K. Song, B. Kim, H. Lee, Y.J. Lee, C. Park, N. Balaji, M. Ju, J. Choi, J. Yi, Selective emitter using a screen printed etch barrier in crystalline silicon solar cell, Nanoscale Research Letters 7 (2012) 410-1–410-8.10.1186/1556-276X-7-410 ↗
5. H. Antoniadis, Silicon ink high efficiency solar cells, in: Proceedings of the 34th IEEE Photovoltaic Specialists Conference, 2009, pp. 650–654.10.1109/PVSC.2009.5411597 ↗
6. D. Poplavskyy, G. Scardera, M. Abbott, A. Meisel, X. Chen, S. Shah, E. Tai, M. Terry, F. Lemmi, Silicon ink selective emitter process: optimization of selectively diffused regions for short wavelength response, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, 2010, pp. 3565–3569.10.1109/PVSC.2010.5614303 ↗
7. G. Scardera, D. Poplavskyy, M. Abbott, F. Lemmi, Highly tunable single step selective emitter diffusion process using silicon ink technology, in: Proceedings of the 37th IEEE Photovoltaic Specialists Conference, 2011, pp. 2202–2205.10.1109/PVSC.2011.6186394 ↗
8. Z. Hameiri, L. Mai, A. Sproul, S.R. Wenham, 18.7% efficient laser-doped solar cell on p-type Czochralski silicon, Applied Physics Letters 97 (2010) 222111-1–222111-3.10.1063/1.3515866 ↗
9. Laser induced defects in laser doped solar cells10.1002/pip.1043 ↗
10. Improved LDSE processing for the avoidance of overplating yielding 19.2% efficiency on commercial grade crystalline Si solar cell10.1016/j.solmat.2011.07.030 ↗
11. H. Nishimura, K. Hirata, M. Hasegawa, T. Katagiri, T. Fuyuki, Improved electronic properties of laser-doped emitters by reducing surface roughness, Japanese Journal of Applied Physics 51 (2012) 10NA15-1–10NA15-4.10.7567/JJAP.51.015102 ↗
12. Overcoming over-plating problems for PECVD SiNx passivated laser doped p-type multi-crystalline silicon solar cells10.1016/j.solmat.2011.12.003 ↗
13. Improving the efficiency of crystalline silicon solar cells by an intersected selective laser doping10.1016/j.solmat.2011.07.028 ↗
14. High efficiency selective emitter cells using patterned ion implantation10.1016/j.egypro.2011.06.205 ↗
15. A novel method to achieve selective emitter for silicon solar cell using low cost pattern-able a-Si thin films as the semi-transparent phosphorus diffusion barrier10.1016/j.apenergy.2011.10.033 ↗
16. Effect of porous Si and an etch-back process on the performance of a selective emitter solar cell10.1016/j.solmat.2012.10.009 ↗
17. C.-H. Lin, S.-P. Hsu, J.-J. Liou, C.-P. Chuang, W.-H. Lu, W.-L. Chang, Characterization of selective-emitter solar cells consists of laser opened window and subsequently screen-printed electrodes, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, 2010, pp. 3523–3526.10.1109/PVSC.2010.5614037 ↗
18. Selective emitter using porous silicon for crystalline silicon solar cells10.1016/j.solmat.2008.09.042 ↗
19. B. Hallam, S. Wenham, H. Lee, E. Lee, J. Kim, J. Shin, K. Cho, Record efficiency on large area p-type Czochralski silicon substrates, Japanese Journal of Applied Physics 51 (2012) 10NA08-1–10NA08-4.10.1143/JJAP.51.10NA08 ↗
20. B. Tjahjono, H. Haverkamp, V. Wu, H.T. Anditsch, W.H. Jung, J. Cheng, J. Ting, M.J. Yang, D. Habermann, T. Sziptalak, C. Buchner, C. Schmid, B. Beilby, K.C. Hsu, Optimizing selective emitter technology in one year of full scale production, in: Proceedings of the 26th European PVSEC, 2011, pp. 901–905.
21. H. Antoniadis, F. Jiang, W. Shan, Y. Liu, All screen printed mass produced silicon ink selective emittter solar cells, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, 2010, pp. 1193–1196.10.1109/PVSC.2010.5614092 ↗
22. Selective emitter formation process using single screen-printed phosphorus diffusion source10.1016/j.solmat.2012.11.013 ↗
23. Recombination at metal-emitter interfaces of front contact technologies for highly efficient silicon solar cells10.1016/j.egypro.2011.06.111 ↗
24. Surface recombination velocity of phosphorus-diffused silicon solar cell emitters passivated with plasma enhanced chemical vapor deposited silicon nitride and thermal silicon oxide10.1063/1.1350633 ↗
25. M. Hilali, J.-W. Jeong, A. Rohatgi, D.L. Meier, A.F. Carroll, Optimization of self-doping Ag paste firing to achieve high fill factors on screen-printed silicon solar cells with a 100Ω/sq. emitter, in: Proceedings of the 29th IEEE Photovoltaic Specialists Conference, 2002, pp. 356–359.