journal article·2012-09

Synthesis and photovoltaic properties of low band gap quarterthiophenes-alt-diketopyrrolopyrroles polymers having high hole mobility

Seon Kyoung Son, Bong Soo Kim, Chun-Young Lee, Joong Suk Lee, Jeong Ho Cho, Min Jae Ko, Doh-Kwon Lee, Honggon Kim, Dong Hoon Choi, Kyungkon Kim

Publisher page

Abstract

Abstract Two low band gap copolymers (PQTDPP and PQTVTDPP) having quaterthiophene (QT) or bithiophene-vinylene-bithiophene (QTVT) as donor unit and diketopyrrolopyrrole (DPP) as acceptor unit have been synthesized via Stille cross-coupling polymerization. The polymers showed high thermal stability and broad light absorption with optical band gaps around 1.3 eV. Cyclic voltammetry measurements revealed that the HOMO and LUMO energy levels of QT and DPP copolymer (PQTDPP) were found to be −5.19 and −3.64 eV, respectively and those of PQTVTDPP −5.05 and −3.66 eV, respectively. X-ray diffraction patterns showed highly crystalline phase in the PQTDPP film and nearly amorphous in the PQTVTDPP film. This dramatic difference in crystallinity was attributed to the structural isomerization around vinyl groups in the PQTVTDPP polymer. Field-effect transistor measurement revealed that the PQTDPP showed high hole mobility of 0.06 cm 2 /Vs and on/off ratio of 10 6 while the PQTVTDPP showed hole mobility of 3.57×10 −4 cm 2 /Vs and on/off ratio of 10 5 , which is consistent with X-ray diffraction results. Photovoltaic devices were also fabricated using polymer:PCBM blends in the structure of ITO/PEDOT:PSS/blend/Al. The PQTDPP devices exhibited an open circuit voltage ( V oc ) of 0.58 V, a short circuit current ( J sc ) of 7.16 mA/cm 2 , a fill factor ( FF ) of 0.55 and a power conversion efficiency ( PCE ) of 2.28%, and the PQTVTDPP devices exhibited an V oc of 0.50 V, a J sc of 7.60 mA/cm 2 , a FF of 0.51 and a PCE of 1.97% under AM 1.5 illumination.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Electron and ambipolar transport in organic field-effect transistors10.1021/cr0501543 ↗
2. Conjugated polymer photovoltaic cells10.1021/cm049654n ↗
3. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
5. Polymer–fullerene composite solar cells10.1002/anie.200702506 ↗
6. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
7. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
8. A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells10.1038/nmat1574 ↗
9. Charge transport and photocurrent generation in poly(3-hexylthiophene):methanofullerene bulk-heterojunction solar cells10.1002/adfm.200500420 ↗
10. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
11. Design rules for donors in bulk-heterojunction solar cells—towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
12. Bulk heterojunction solar cells using thieno[3,4-c]pyrrole-4,6-dione and dithieno[3,2-b:2′,3′-d]silole copolymer with a power conversion efficiency of 7.3%10.1021/ja200314m ↗
13. For the bright future—bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
14. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
15. Photovoltaic characterization of poly(2,5-bis(3-dodecylthiophen-2-yl)-2′,2″-biselenophene) for organic solar cells10.1016/j.solmat.2009.10.025 ↗
16. Efficient bulk heterojunction solar cells from regio-regular-poly(3,3′-didodecyl quaterthiophene)/PC70BM blends10.1016/j.orgel.2008.04.005 ↗
17. Photovoltaic solar cells using poly(3,3-didodecylquaterthiophene)10.1016/j.solmat.2007.12.006 ↗
18. A new poly(thienylenevinylene) derivative with high mobility and oxidative stability for organic thin-film transistors and solar cells10.1002/adma.200803700 ↗
19. Synthesis and photovoltaic properties of a thienylenevinylene and diketopyrrolopyrrole copolymer with high mobility10.1002/marc.201100327 ↗
20. Synthesis and characterization of a narrow-bandgap polymer containing alternating cyclopentadithiophene and diketo-pyrrolo-pyrrole units for solar cell applications10.1002/pola.23931 ↗
21. Synthesis of oligothiophene-bridged bisporphyrins and study of the linkage dependence of the electronic coupling10.1002/1521-3765(20020703)8:13<3027::AID-CHEM3027>3.0.CO;2-Z ↗
22. Bandgap and molecular level control of the low-bandgap polymers based on 3,6-dithiophen-2-yl-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione toward highly efficient polymer solar cells10.1021/ma9012972 ↗
23. Liquid-crystalline semiconducting polymers with high charge-carrier mobility10.1038/nmat1612 ↗
24. A high-mobility low-bandgap poly(2,7-carbazole) derivative for photovoltaic applications10.1021/ma900364c ↗
25. Low band-gap polymers based on quinoxaline derivatives and fused thiophene as donor materials for high efficiency bulk-heterojunction photovoltaic cells10.1039/b823536h ↗
26. Polythiophene-based field-effect transistors with enhanced air stability10.1016/j.synthmet.2003.07.004 ↗
27. High-performance semiconducting polythiophenes for organic thin-film transistors10.1021/ja039772w ↗
28. New two-dimensional thiophene-acceptor conjugated copolymers for field effect transistor and photovoltaic cell applications10.1021/cm100661z ↗
29. Conjugated donor–acceptor copolymer semiconductors with large intramolecular charge transfer: synthesis, optical properties, electrochemistry, and field effect carrier mobility of thienopyrazine-based copolymers10.1021/ma061861g ↗
30. The relation between open-circuit voltage and the onset of photocurrent generation by charge-transfer absorption in polymer: fullerene bulk heterojunction solar cells10.1002/adfm.200800056 ↗
31. On the origin of the open-circuit voltage of polymer-fullerene solar cells10.1038/nmat2548 ↗
32. Cathode dependence of the open-circuit voltage of polymer:fullerene bulk heterojunction solar cells10.1063/1.1620683 ↗
33. Enhanced device performance of polymer solar cells by planarization of quinoxaline derivative in a low-bandgap polymer10.1039/c1jm10877h ↗
34. Diketopyrrolopyrrole-based π-bridged donor–acceptor polymer for photovoltaic applications10.1021/am200720e ↗
35. Electron and hole transport in poly(fluorene-benzothiadiazole)10.1063/1.3574907 ↗
36. Electron transport in a methanofullerene10.1002/adfm.200390004 ↗
37. Ambipolar charge transport in films of methanofullerene and poly(phenylenevinylene)/methanofullerene blends10.1002/adfm.200400337 ↗